gdb --help

List of classes of commands:

aliases -- Aliases of other commands
breakpoints -- Making program stop at certain points
data -- Examining data
files -- Specifying and examining files
internals -- Maintenance commands
obscure -- Obscure features
running -- Running the program
stack -- Examining the stack
status -- Status inquiries
support -- Support facilities
tracepoints -- Tracing of program execution without stopping the program
user-defined -- User-defined commands

Type "help" followed by a class name for a list of commands in that class.
Type "help all" for the list of all commands.
Type "help" followed by command name for full documentation.
Type "apropos word" to search for commands related to "word".
Command name abbreviations are allowed if unambiguous.
(gdb) help all

Command class: aliases

ni -- Step one instruction
rc -- Continue program being debugged but run it in reverse
rni -- Step backward one instruction
rsi -- Step backward exactly one instruction
si -- Step one instruction exactly
stepping -- Specify single-stepping behavior at a tracepoint
tp -- Set a tracepoint at specified line or function
tty -- Set terminal for future runs of program being debugged
where -- Print backtrace of all stack frames
ws -- Specify single-stepping behavior at a tracepoint

Command class: breakpoints

awatch -- Set a watchpoint for an expression
break -- Set breakpoint at specified line or function
break-range -- Set a breakpoint for an address range
catch -- Set catchpoints to catch events
catch assert -- Catch failed Ada assertions
catch catch -- Catch an exception
catch exception -- Catch Ada exceptions
catch exec -- Catch calls to exec
catch fork -- Catch calls to fork
catch load -- Catch loads of shared libraries
catch signal -- Catch signals by their names and/or numbers
catch syscall -- Catch system calls by their names and/or numbers
catch throw -- Catch an exception
catch unload -- Catch unloads of shared libraries
catch vfork -- Catch calls to vfork
clear -- Clear breakpoint at specified line or function
commands -- Set commands to be executed when a breakpoint is hit
condition -- Specify breakpoint number N to break only if COND is true
delete -- Delete some breakpoints or auto-display expressions
delete bookmark -- Delete a bookmark from the bookmark list
delete breakpoints -- Delete some breakpoints or auto-display expressions
delete checkpoint -- Delete a checkpoint (experimental)
delete display -- Cancel some expressions to be displayed when program stops
delete mem -- Delete memory region
delete tracepoints -- Delete specified tracepoints
delete tvariable -- Delete one or more trace state variables
disable -- Disable some breakpoints
disable breakpoints -- Disable some breakpoints
disable display -- Disable some expressions to be displayed when program stops
disable frame-filter -- GDB command to disable the specified frame-filter
disable mem -- Disable memory region
disable pretty-printer -- GDB command to disable the specified pretty-printer
disable tracepoints -- Disable specified tracepoints
disable type-printer -- GDB command to disable the specified type-printer
dprintf -- Set a dynamic printf at specified line or function
enable -- Enable some breakpoints
enable breakpoints -- Enable some breakpoints
enable breakpoints count -- Enable breakpoints for COUNT hits
enable breakpoints delete -- Enable breakpoints and delete when hit
enable breakpoints once -- Enable breakpoints for one hit
enable count -- Enable breakpoints for COUNT hits
enable delete -- Enable breakpoints and delete when hit
enable display -- Enable some expressions to be displayed when program stops
enable frame-filter -- GDB command to disable the specified frame-filter
enable mem -- Enable memory region
enable once -- Enable breakpoints for one hit
enable pretty-printer -- GDB command to enable the specified pretty-printer
enable tracepoints -- Enable specified tracepoints
enable type-printer -- GDB command to enable the specified type printer
ftrace -- Set a fast tracepoint at specified line or function
hbreak -- Set a hardware assisted breakpoint
ignore -- Set ignore-count of breakpoint number N to COUNT
rbreak -- Set a breakpoint for all functions matching REGEXP
rwatch -- Set a read watchpoint for an expression
save -- Save breakpoint definitions as a script
save breakpoints -- Save current breakpoint definitions as a script
save gdb-index -- Save a gdb-index file
save tracepoints -- Save current tracepoint definitions as a script
skip -- Ignore a function while stepping
skip delete -- Delete skip entries
skip disable -- Disable skip entries
skip enable -- Enable skip entries
skip file -- Ignore a file while stepping
skip function -- Ignore a function while stepping
strace -- Set a static tracepoint at specified line
tbreak -- Set a temporary breakpoint
tcatch -- Set temporary catchpoints to catch events
tcatch assert -- Catch failed Ada assertions
tcatch catch -- Catch an exception
tcatch exception -- Catch Ada exceptions
tcatch exec -- Catch calls to exec
tcatch fork -- Catch calls to fork
tcatch load -- Catch loads of shared libraries
tcatch signal -- Catch signals by their names and/or numbers
tcatch syscall -- Catch system calls by their names and/or numbers
tcatch throw -- Catch an exception
tcatch unload -- Catch unloads of shared libraries
tcatch vfork -- Catch calls to vfork
thbreak -- Set a temporary hardware assisted breakpoint
trace -- Set a tracepoint at specified line or function
watch -- Set a watchpoint for an expression

Command class: data

agent-printf -- Agent-printf "printf format string"
append -- Append target code/data to a local file
append binary -- Append target code/data to a raw binary file
append binary memory -- Append contents of memory to a raw binary file
append binary value -- Append the value of an expression to a raw binary file
append memory -- Append contents of memory to a raw binary file
append value -- Append the value of an expression to a raw binary file
call -- Call a function in the program
disassemble -- Disassemble a specified section of memory
display -- Print value of expression EXP each time the program stops
dump -- Dump target code/data to a local file
dump binary -- Write target code/data to a raw binary file
dump binary memory -- Write contents of memory to a raw binary file
dump binary value -- Write the value of an expression to a raw binary file
dump ihex -- Write target code/data to an intel hex file
dump ihex memory -- Write contents of memory to an ihex file
dump ihex value -- Write the value of an expression to an ihex file
dump memory -- Write contents of memory to a raw binary file
dump srec -- Write target code/data to an srec file
dump srec memory -- Write contents of memory to an srec file
dump srec value -- Write the value of an expression to an srec file
dump tekhex -- Write target code/data to a tekhex file
dump tekhex memory -- Write contents of memory to a tekhex file
dump tekhex value -- Write the value of an expression to a tekhex file
dump value -- Write the value of an expression to a raw binary file
explore -- Explore a value or a type valid in the current context
explore type -- Explore a type or the type of an expression valid in the current
explore value -- Explore value of an expression valid in the current context
find -- Search memory for a sequence of bytes
init-if-undefined -- Initialize a convenience variable if necessary
mem -- Define attributes for memory region or reset memory region handling to
output -- Like "print" but don't put in value history and don't print newline
print -- Print value of expression EXP
print-object -- Ask an Objective-C object to print itself
printf -- Printf "printf format string"
ptype -- Print definition of type TYPE
restore -- Restore the contents of FILE to target memory
set -- Evaluate expression EXP and assign result to variable VAR
set ada -- Prefix command for changing Ada-specfic settings
set ada trust-PAD-over-XVS -- Enable or disable an optimization trusting PAD types over XVS types
set agent -- Set debugger's willingness to use agent as a helper
set annotate -- Set annotation_level
set architecture -- Set architecture of target
set args -- Set argument list to give program being debugged when it is started
set auto-load -- Auto-loading specific settings
set auto-load gdb-scripts -- Enable or disable auto-loading of canned sequences of commands scripts
set auto-load libthread-db -- Enable or disable auto-loading of inferior specific libthread_db
set auto-load local-gdbinit -- Enable or disable auto-loading of .gdbinit script in current directory
set auto-load python-scripts -- Set the debugger's behaviour regarding auto-loaded Python scripts
set auto-load safe-path -- Set the list of files and directories that are safe for auto-loading
set auto-load scripts-directory -- Set the list of directories from which to load auto-loaded scripts
set auto-load-scripts -- Set the debugger's behaviour regarding auto-loaded Python scripts
set auto-solib-add -- Set autoloading of shared library symbols
set backtrace -- Set backtrace specific variables
set backtrace limit -- Set an upper bound on the number of backtrace levels
set backtrace past-entry -- Set whether backtraces should continue past the entry point of a program
set backtrace past-main -- Set whether backtraces should continue past "main"
set basenames-may-differ -- Set whether a source file may have multiple base names
set breakpoint -- Breakpoint specific settings
set breakpoint always-inserted -- Set mode for inserting breakpoints
set breakpoint auto-hw -- Set automatic usage of hardware breakpoints
set breakpoint condition-evaluation -- Set mode of breakpoint condition evaluation
set breakpoint pending -- Set debugger's behavior regarding pending breakpoints
set build-id-core-loads -- Set whether CORE-FILE loads the build-id associated files automatically
set build-id-verbose -- Set debugging level of the build-id locator
set can-use-hw-watchpoints -- Set debugger's willingness to use watchpoint hardware
set case-sensitive -- Set case sensitivity in name search
set charset -- Set the host and target character sets
set check -- Set the status of the type/range checker
set check range -- Set range checking
set check type -- Set strict type checking
set circular-trace-buffer -- Set target's use of circular trace buffer
set coerce-float-to-double -- Set coercion of floats to doubles when calling functions
set complaints -- Set max number of complaints about incorrect symbols
set confirm -- Set whether to confirm potentially dangerous operations
set cp-abi -- Set the ABI used for inspecting C++ objects
set data-directory -- Set GDB's data directory
set dcache -- Use this command to set number of lines in dcache and line-size
set dcache line-size -- Set dcache line size in bytes (must be power of 2)
set dcache size -- Set number of dcache lines
set debug -- Generic command for setting gdb debugging flags
set debug arch -- Set architecture debugging
set debug auto-load -- Set auto-load verifications debugging
set debug check-physname -- Set cross-checking of "physname" code against demangler
set debug coff-pe-read -- Set coff PE read debugging
set debug displaced -- Set displaced stepping debugging
set debug dwarf2-die -- Set debugging of the dwarf2 DIE reader
set debug dwarf2-read -- Set debugging of the dwarf2 reader
set debug entry-values -- Set entry values and tail call frames debugging
set debug expression -- Set expression debugging
set debug frame -- Set frame debugging
set debug infrun -- Set inferior debugging
set debug jit -- Set JIT debugging
set debug libthread-db -- Set libthread-db debugging
set debug lin-lwp -- Set debugging of GNU/Linux lwp module
set debug notification -- Set debugging of async remote notification
set debug observer -- Set observer debugging
set debug overload -- Set debugging of C++ overloading
set debug parser -- Set parser debugging
set debug record -- Set debugging of record/replay feature
set debug remote -- Set debugging of remote protocol
set debug serial -- Set serial debugging
set debug stap-expression -- Set SystemTap expression debugging
set debug symtab-create -- Set debugging of symbol table creation
set debug target -- Set target debugging
set debug timestamp -- Set timestamping of debugging messages
set debug xml -- Set XML parser debugging
set debug-file-directory -- Set the directories where separate debug symbols are searched for
set debugvarobj -- Set varobj debugging
set default-collect -- Set the list of expressions to collect by default
set demangle-style -- Set the current C++ demangling style
set detach-on-fork -- Set whether gdb will detach the child of a fork
set directories -- Set the search path for finding source files
set disable-randomization -- Set disabling of debuggee's virtual address space randomization
set disassemble-next-line -- Set whether to disassemble next source line or insn when execution stops
set disassembly-flavor -- Set the disassembly flavor
set disconnected-dprintf -- Set whether dprintf continues after GDB disconnects
set disconnected-tracing -- Set whether tracing continues after GDB disconnects
set displaced-stepping -- Set debugger's willingness to use displaced stepping
set dprintf-channel -- Set the channel to use for dynamic printf
set dprintf-function -- Set the function to use for dynamic printf
set dprintf-style -- Set the style of usage for dynamic printf
set editing -- Set editing of command lines as they are typed
set endian -- Set endianness of target
set environment -- Set environment variable value to give the program
set exec-direction -- Set direction of execution
set exec-done-display -- Set notification of completion for asynchronous execution commands
set exec-wrapper -- Set a wrapper for running programs
set extended-prompt -- Set the extended prompt
set extension-language -- Set mapping between filename extension and source language
set filename-display -- Set how to display filenames
set follow-exec-mode -- Set debugger response to a program call of exec
set follow-fork-mode -- Set debugger response to a program call of fork or vfork
set frame-filter -- Prefix command for 'set' frame-filter related operations
set frame-filter priority -- GDB command to set the priority of the specified frame-filter
set gnutarget -- Set the current BFD target
set height -- Set number of lines in a page for GDB output pagination
set history -- Generic command for setting command history parameters
set history expansion -- Set history expansion on command input
set history filename -- Set the filename in which to record the command history
set history save -- Set saving of the history record on exit
set history size -- Set the size of the command history
set host-charset -- Set the host character set
set inferior-tty -- Set terminal for future runs of program being debugged
set input-radix -- Set default input radix for entering numbers
set interactive-mode -- Set whether GDB's standard input is a terminal
set language -- Set the current source language
set libthread-db-search-path -- Set search path for libthread_db
set listsize -- Set number of source lines gdb will list by default
set logging -- Set logging options
set logging file -- Set the current logfile
set logging off -- Disable logging
set logging on -- Enable logging
set logging overwrite -- Set whether logging overwrites or appends to the log file
set logging redirect -- Set the logging output mode
set max-user-call-depth -- Set the max call depth for non-python user-defined commands
set may-insert-breakpoints -- Set permission to insert breakpoints in the target
set may-insert-fast-tracepoints -- Set permission to insert fast tracepoints in the target
set may-insert-tracepoints -- Set permission to insert tracepoints in the target
set may-interrupt -- Set permission to interrupt or signal the target
set may-write-memory -- Set permission to write into target memory
set may-write-registers -- Set permission to write into registers
set mem -- Memory regions settings
set mem inaccessible-by-default -- Set handling of unknown memory regions
set multiple-symbols -- Set the debugger behavior when more than one symbol are possible matches
set non-stop -- Set whether gdb controls the inferior in non-stop mode
set observer -- Set whether gdb controls the inferior in observer mode
set opaque-type-resolution -- Set resolution of opaque struct/class/union types (if set before loading symbols)
set osabi -- Set OS ABI of target
set output-radix -- Set default output radix for printing of values
set overload-resolution -- Set overload resolution in evaluating C++ functions
set pagination -- Set state of GDB output pagination
set powerpc -- Various PowerPC-specific commands
set powerpc exact-watchpoints -- Set whether to use just one debug register for watchpoints on scalars
set powerpc soft-float -- Set whether to use a soft-float ABI
set powerpc vector-abi -- Set the vector ABI
set print -- Generic command for setting how things print
set print address -- Set printing of addresses
set print array -- Set prettyprinting of arrays
set print array-indexes -- Set printing of array indexes
set print asm-demangle -- Set demangling of C++/ObjC names in disassembly listings
set print demangle -- Set demangling of encoded C++/ObjC names when displaying symbols
set print elements -- Set limit on string chars or array elements to print
set print entry-values -- Set printing of function arguments at function entry
set print frame-arguments -- Set printing of non-scalar frame arguments
set print inferior-events -- Set printing of inferior events (e.g.
set print max-symbolic-offset -- Set the largest offset that will be printed in <symbol+1234> form
set print null-stop -- Set printing of char arrays to stop at first null char
set print object -- Set printing of object's derived type based on vtable info
set print pascal_static-members -- Set printing of pascal static members
set print pretty -- Set prettyprinting of structures
set print repeats -- Set threshold for repeated print elements
set print sevenbit-strings -- Set printing of 8-bit characters in strings as \nnn
set print static-members -- Set printing of C++ static members
set print symbol -- Set printing of symbol names when printing pointers
set print symbol-filename -- Set printing of source filename and line number with <symbol>
set print thread-events -- Set printing of thread events (such as thread start and exit)
set print type -- Generic command for setting how types print
show print type methods -- Set printing of methods defined in classes
show print type typedefs -- Set printing of typedefs defined in classes
set print union -- Set printing of unions interior to structures
set print vtbl -- Set printing of C++ virtual function tables
set prompt -- Set gdb's prompt
set python -- Prefix command for python preference settings
set python print-stack -- Set mode for Python stack dump on error
set radix -- Set default input and output number radices
set ravenscar -- Prefix command for changing Ravenscar-specific settings
set ravenscar task-switching -- Enable or disable support for GNAT Ravenscar tasks
set record -- Set record options
set record full -- Set record options
set record full insn-number-max -- Set record/replay buffer limit
set record full memory-query -- Set whether query if PREC cannot record memory change of next instruction
set record full stop-at-limit -- Set whether record/replay stops when record/replay buffer becomes full
set record function-call-history-size -- Set number of function to print in "record function-call-history"
set record instruction-history-size -- Set number of instructions to print in "record instruction-history"
set remote -- Remote protocol specific variables
set remote P-packet -- Set use of remote protocol `P' (set-register) packet
set remote TracepointSource-packet -- Set use of remote protocol `TracepointSource' (TracepointSource) packet
set remote X-packet -- Set use of remote protocol `X' (binary-download) packet
set remote Z-packet -- Set use of remote protocol `Z' packets
set remote access-watchpoint-packet -- Set use of remote protocol `Z4' (access-watchpoint) packet
set remote agent-packet -- Set use of remote protocol `QAgent' (agent) packet
set remote allow-packet -- Set use of remote protocol `QAllow' (allow) packet
set remote attach-packet -- Set use of remote protocol `vAttach' (attach) packet
set remote binary-download-packet -- Set use of remote protocol `X' (binary-download) packet
set remote breakpoint-commands-packet -- Set use of remote protocol `BreakpointCommands' (breakpoint-commands) packet
set remote conditional-breakpoints-packet -- Set use of remote protocol `ConditionalBreakpoints' (conditional-breakpoints) packet
set remote conditional-tracepoints-packet -- Set use of remote protocol `ConditionalTracepoints' (conditional-tracepoints) packet
set remote disable-btrace-packet -- Set use of remote protocol `Qbtrace:off' (disable-btrace) packet
set remote disable-randomization-packet -- Set use of remote protocol `QDisableRandomization' (disable-randomization) packet
set remote enable-btrace-packet -- Set use of remote protocol `Qbtrace:bts' (enable-btrace) packet
set remote exec-file -- Set the remote pathname for "run"
set remote fast-tracepoints-packet -- Set use of remote protocol `FastTracepoints' (fast-tracepoints) packet
set remote fetch-register-packet -- Set use of remote protocol `p' (fetch-register) packet
set remote get-thread-information-block-address-packet -- Set use of remote protocol `qGetTIBAddr' (get-thread-information-block-address) packet
set remote get-thread-local-storage-address-packet -- Set use of remote protocol `qGetTLSAddr' (get-thread-local-storage-address) packet
set remote hardware-breakpoint-limit -- Set the maximum number of target hardware breakpoints
set remote hardware-breakpoint-packet -- Set use of remote protocol `Z1' (hardware-breakpoint) packet
set remote hardware-watchpoint-length-limit -- Set the maximum length (in bytes) of a target hardware watchpoint
set remote hardware-watchpoint-limit -- Set the maximum number of target hardware watchpoints
set remote hostio-close-packet -- Set use of remote protocol `vFile:close' (hostio-close) packet
set remote hostio-open-packet -- Set use of remote protocol `vFile:open' (hostio-open) packet
set remote hostio-pread-packet -- Set use of remote protocol `vFile:pread' (hostio-pread) packet
set remote hostio-pwrite-packet -- Set use of remote protocol `vFile:pwrite' (hostio-pwrite) packet
set remote hostio-readlink-packet -- Set use of remote protocol `vFile:readlink' (hostio-readlink) packet
set remote hostio-unlink-packet -- Set use of remote protocol `vFile:unlink' (hostio-unlink) packet
set remote install-in-trace-packet -- Set use of remote protocol `InstallInTrace' (install-in-trace) packet
set remote interrupt-on-connect -- Set whether interrupt-sequence is sent to remote target when gdb connects to
set remote interrupt-sequence -- Set interrupt sequence to remote target
set remote kill-packet -- Set use of remote protocol `vKill' (kill) packet
set remote library-info-packet -- Set use of remote protocol `qXfer:libraries:read' (library-info) packet
set remote library-info-svr4-packet -- Set use of remote protocol `qXfer:libraries-svr4:read' (library-info-svr4) packet
set remote memory-map-packet -- Set use of remote protocol `qXfer:memory-map:read' (memory-map) packet
set remote memory-read-packet-size -- Set the maximum number of bytes per memory-read packet
set remote memory-write-packet-size -- Set the maximum number of bytes per memory-write packet
set remote noack-packet -- Set use of remote protocol `QStartNoAckMode' (noack) packet
set remote osdata-packet -- Set use of remote protocol `qXfer:osdata:read' (osdata) packet
set remote p-packet -- Set use of remote protocol `p' (fetch-register) packet
set remote pass-signals-packet -- Set use of remote protocol `QPassSignals' (pass-signals) packet
set remote program-signals-packet -- Set use of remote protocol `QProgramSignals' (program-signals) packet
set remote query-attached-packet -- Set use of remote protocol `qAttached' (query-attached) packet
set remote read-aux-vector-packet -- Set use of remote protocol `qXfer:auxv:read' (read-aux-vector) packet
set remote read-btrace-packet -- Set use of remote protocol `qXfer:btrace' (read-btrace) packet
set remote read-fdpic-loadmap-packet -- Set use of remote protocol `qXfer:fdpic:read' (read-fdpic-loadmap) packet
set remote read-sdata-object-packet -- Set use of remote protocol `qXfer:statictrace:read' (read-sdata-object) packet
set remote read-siginfo-object-packet -- Set use of remote protocol `qXfer:siginfo:read' (read-siginfo-object) packet
set remote read-spu-object-packet -- Set use of remote protocol `qXfer:spu:read' (read-spu-object) packet
set remote read-watchpoint-packet -- Set use of remote protocol `Z3' (read-watchpoint) packet
set remote reverse-continue-packet -- Set use of remote protocol `bc' (reverse-continue) packet
set remote reverse-step-packet -- Set use of remote protocol `bs' (reverse-step) packet
set remote run-packet -- Set use of remote protocol `vRun' (run) packet
set remote search-memory-packet -- Set use of remote protocol `qSearch:memory' (search-memory) packet
set remote set-register-packet -- Set use of remote protocol `P' (set-register) packet
set remote software-breakpoint-packet -- Set use of remote protocol `Z0' (software-breakpoint) packet
set remote static-tracepoints-packet -- Set use of remote protocol `StaticTracepoints' (static-tracepoints) packet
set remote supported-packets-packet -- Set use of remote protocol `qSupported' (supported-packets) packet
set remote symbol-lookup-packet -- Set use of remote protocol `qSymbol' (symbol-lookup) packet
set remote system-call-allowed -- Set if the host system(3) call is allowed for the target
set remote target-features-packet -- Set use of remote protocol `qXfer:features:read' (target-features) packet
set remote threads-packet -- Set use of remote protocol `qXfer:threads:read' (threads) packet
set remote trace-buffer-size-packet -- Set use of remote protocol `QTBuffer:size' (trace-buffer-size) packet
set remote traceframe-info-packet -- Set use of remote protocol `qXfer:trace-frame-info:read' (traceframe-info) packet
set remote unwind-info-block-packet -- Set use of remote protocol `qXfer:uib:read' (unwind-info-block) packet
set remote verbose-resume-packet -- Set use of remote protocol `vCont' (verbose-resume) packet
set remote write-siginfo-object-packet -- Set use of remote protocol `qXfer:siginfo:write' (write-siginfo-object) packet
set remote write-spu-object-packet -- Set use of remote protocol `qXfer:spu:write' (write-spu-object) packet
set remote write-watchpoint-packet -- Set use of remote protocol `Z2' (write-watchpoint) packet
set remoteaddresssize -- Set the maximum size of the address (in bits) in a memory packet
set remotebaud -- Set baud rate for remote serial I/O
set remotebreak -- Set whether to send break if interrupted
set remotecache -- Set cache use for remote targets
set remoteflow -- Set use of hardware flow control for remote serial I/O
set remotelogbase -- Set numerical base for remote session logging
set remotelogfile -- Set filename for remote session recording
set remotetimeout -- Set timeout limit to wait for target to respond
set remotewritesize -- Set the maximum number of bytes per memory write packet (deprecated)
set schedule-multiple -- Set mode for resuming threads of all processes
set scheduler-locking -- Set mode for locking scheduler during execution
set script-extension -- Set mode for script filename extension recognition
set serial -- Set default serial/parallel port configuration
set solib-absolute-prefix -- Set an alternate system root
set solib-search-path -- Set the search path for loading non-absolute shared library symbol files
set stack-cache -- Set cache use for stack access
set step-mode -- Set mode of the step operation
set stop-on-solib-events -- Set stopping for shared library events
set struct-convention -- Set the convention for returning small structs
set substitute-path -- Usage: set substitute-path FROM TO
set sysroot -- Set an alternate system root
set target-async -- Set whether gdb controls the inferior in asynchronous mode
set target-charset -- Set the target character set
set target-file-system-kind -- Set assumed file system kind for target reported file names
set target-wide-charset -- Set the target wide character set
set tcp -- TCP protocol specific variables
set tcp auto-retry -- Set auto-retry on socket connect
set tcp connect-timeout -- Set timeout limit for socket connection
set tdesc -- Set target description specific variables
set tdesc filename -- Set the file to read for an XML target description
set trace-buffer-size -- Set requested size of trace buffer
set trace-commands -- Set tracing of GDB CLI commands
set trace-notes -- Set notes string to use for current and future trace runs
set trace-stop-notes -- Set notes string to use for future tstop commands
set trace-user -- Set the user name to use for current and future trace runs
set trust-readonly-sections -- Set mode for reading from readonly sections
set tui -- TUI configuration variables
set tui active-border-mode -- Set the attribute mode to use for the active TUI window border
set tui border-kind -- Set the kind of border for TUI windows
set tui border-mode -- Set the attribute mode to use for the TUI window borders
set unwind-on-terminating-exception -- Set unwinding of stack if std::terminate is called while in call dummy
set unwindonsignal -- Set unwinding of stack if a signal is received while in a call dummy
set use-deprecated-index-sections -- Set whether to use deprecated gdb_index sections
set variable -- Evaluate expression EXP and assign result to variable VAR
set verbose -- Set verbosity
set watchdog -- Set watchdog timer
set width -- Set number of characters where GDB should wrap lines of its output
set write -- Set writing into executable and core files
undisplay -- Cancel some expressions to be displayed when program stops
whatis -- Print data type of expression EXP
x -- Examine memory: x/FMT ADDRESS

Command class: files

add-symbol-file -- Load symbols from FILE
add-symbol-file-from-memory -- Load the symbols out of memory from a dynamically loaded object file
cd -- Set working directory to DIR for debugger and program being debugged
core-file -- Use FILE as core dump for examining memory and registers
directory -- Add directory DIR to beginning of search path for source files
edit -- Edit specified file or function
exec-file -- Use FILE as program for getting contents of pure memory
file -- Use FILE as program to be debugged
forward-search -- Search for regular expression (see regex(3)) from last line listed
generate-core-file -- Save a core file with the current state of the debugged process
list -- List specified function or line
load -- Dynamically load FILE into the running program
nosharedlibrary -- Unload all shared object library symbols
path -- Add directory DIR(s) to beginning of search path for object files
pwd -- Print working directory
remote -- Manipulate files on the remote system
remote delete -- Delete a remote file
remote get -- Copy a remote file to the local system
remote put -- Copy a local file to the remote system
reverse-search -- Search backward for regular expression (see regex(3)) from last line listed
search -- Search for regular expression (see regex(3)) from last line listed
section -- Change the base address of section SECTION of the exec file to ADDR
sharedlibrary -- Load shared object library symbols for files matching REGEXP
symbol-file -- Load symbol table from executable file FILE

Command class: internals

flushregs -- Force gdb to flush its register cache (maintainer command)
maintenance -- Commands for use by GDB maintainers
maintenance agent -- Translate an expression into remote agent bytecode for tracing
maintenance agent-eval -- Translate an expression into remote agent bytecode for evaluation
maintenance agent-printf -- Translate an expression into remote agent bytecode for evaluation and display the bytecodes
maintenance check-symtabs -- Check consistency of psymtabs and symtabs
maintenance cplus -- C++ maintenance commands
maintenance cplus first_component -- Print the first class/namespace component of NAME
maintenance cplus namespace -- Deprecated placeholder for removed functionality
maintenance demangle -- Demangle a C++/ObjC mangled name
maintenance deprecate -- Deprecate a command
maintenance dump-me -- Get fatal error; make debugger dump its core
maintenance info -- Commands for showing internal info about the program being debugged
maintenance info bfds -- List the BFDs that are currently open
maintenance info breakpoints -- Status of all breakpoints
maintenance info program-spaces -- Info about currently known program spaces
maintenance info psymtabs -- List the partial symbol tables for all object files
maintenance info sections -- List the BFD sections of the exec and core files
maintenance info symtabs -- List the full symbol tables for all object files
maintenance internal-error -- Give GDB an internal error
maintenance internal-warning -- Give GDB an internal warning
maintenance packet -- Send an arbitrary packet to a remote target
maintenance print -- Maintenance command for printing GDB internal state
maintenance print architecture -- Print the internal architecture configuration
maintenance print c-tdesc -- Print the current target description as a C source file
maintenance print cooked-registers -- Print the internal register configuration including cooked values
maintenance print dummy-frames -- Print the contents of the internal dummy-frame stack
maintenance print msymbols -- Print dump of current minimal symbol definitions
maintenance print objfiles -- Print dump of current object file definitions
maintenance print psymbols -- Print dump of current partial symbol definitions
maintenance print raw-registers -- Print the internal register configuration including raw values
maintenance print reggroups -- Print the internal register group names
maintenance print register-groups -- Print the internal register configuration including each register's group
maintenance print registers -- Print the internal register configuration
maintenance print remote-registers -- Print the internal register configuration including each register's
maintenance print statistics -- Print statistics about internal gdb state
maintenance print symbols -- Print dump of current symbol definitions
maintenance print target-stack -- Print the name of each layer of the internal target stack
maintenance print type -- Print a type chain for a given symbol
maintenance set -- Set GDB internal variables used by the GDB maintainer
maintenance set dwarf2 -- Set DWARF 2 specific variables
maintenance set dwarf2 always-disassemble -- Set whether `info address' always disassembles DWARF expressions
maintenance set dwarf2 max-cache-age -- Set the upper bound on the age of cached dwarf2 compilation units
maintenance set internal-error -- Configure what GDB does when internal-error is detected
maintenance set internal-error corefile -- Set whether GDB should create a core file of GDB when internal-error is detected
maintenance set internal-error quit -- Set whether GDB should quit when an internal-error is detected
maintenance set internal-warning -- Configure what GDB does when internal-warning is detected
maintenance set internal-warning corefile -- Set whether GDB should create a core file of GDB when internal-warning is detected
maintenance set internal-warning quit -- Set whether GDB should quit when an internal-warning is detected
maintenance set profile -- Set internal profiling
maintenance set show-debug-regs -- Set whether to show variables that mirror the x86 debug registers
maintenance show -- Show GDB internal variables used by the GDB maintainer
maintenance show dwarf2 -- Show DWARF 2 specific variables
maintenance show dwarf2 always-disassemble -- Show whether `info address' always disassembles DWARF expressions
maintenance show dwarf2 max-cache-age -- Show the upper bound on the age of cached dwarf2 compilation units
maintenance show internal-error -- Show what GDB does when internal-error is detected
maintenance show internal-error corefile -- Show whether GDB will create a core file of GDB when internal-error is detected
maintenance show internal-error quit -- Show whether GDB will quit when an internal-error is detected
maintenance show internal-warning -- Show what GDB does when internal-warning is detected
maintenance show internal-warning corefile -- Show whether GDB will create a core file of GDB when internal-warning is detected
maintenance show internal-warning quit -- Show whether GDB will quit when an internal-warning is detected
maintenance show profile -- Show internal profiling
maintenance show show-debug-regs -- Show whether to show variables that mirror the x86 debug registers
maintenance space -- Set the display of space usage
maintenance time -- Set the display of time usage
maintenance translate-address -- Translate a section name and address to a symbol
maintenance undeprecate -- Undeprecate a command

Command class: obscure

checkpoint -- Fork a duplicate process (experimental)
compare-sections -- Compare section data on target to the exec file
complete -- List the completions for the rest of the line as a command
ignore-errors -- Execute a single command
monitor -- Send a command to the remote monitor (remote targets only)
python -- Evaluate a Python command
python-interactive -- Start an interactive Python prompt
record -- Start recording
record btrace -- Start branch trace recording
record delete -- Delete the rest of execution log and start recording it anew
record full -- Start full execution recording
record full restore -- Restore the execution log from a file
record function-call-history -- Prints the execution history at function granularity
record goto -- Restore the program to its state at instruction number N
record instruction-history -- Print disassembled instructions stored in the execution log
record save -- Save the execution log to a file
record stop -- Stop the record/replay target
restart -- Restart <n>: restore program context from a checkpoint
stop -- There is no `stop' command

Command class: running

advance -- Continue the program up to the given location (same form as args for break command)
attach -- Attach to a process or file outside of GDB
continue -- Continue program being debugged
detach -- Detach a process or file previously attached
detach checkpoint -- Detach from a checkpoint (experimental)
detach inferiors -- Detach from inferior ID (or list of IDS)
disconnect -- Disconnect from a target
finish -- Execute until selected stack frame returns
handle -- Specify how to handle signals
inferior -- Use this command to switch between inferiors
interrupt -- Interrupt the execution of the debugged program
jump -- Continue program being debugged at specified line or address
kill -- Kill execution of program being debugged
kill inferiors -- Kill inferior ID (or list of IDs)
next -- Step program
nexti -- Step one instruction
reverse-continue -- Continue program being debugged but run it in reverse
reverse-finish -- Execute backward until just before selected stack frame is called
reverse-next -- Step program backward
reverse-nexti -- Step backward one instruction
reverse-step -- Step program backward until it reaches the beginning of another source line
reverse-stepi -- Step backward exactly one instruction
run -- Start debugged program
signal -- Continue program with the specified signal
start -- Run the debugged program until the beginning of the main procedure
step -- Step program until it reaches a different source line
stepi -- Step one instruction exactly
target -- Connect to a target machine or process
target child -- Unix child process (started by the "run" command)
target core -- Use a core file as a target
target exec -- Use an executable file as a target
target extended-remote -- Use a remote computer via a serial line
target multi-thread -- Threads and pthreads support
target ravenscar -- Ravenscar tasks support
target record -- Log program while executing and replay execution from log
target record-btrace -- Collect control-flow trace and provide the execution history
target record-core -- Log program while executing and replay execution from log
target record-full -- Log program while executing and replay execution from log
target remote -- Use a remote computer via a serial line
target spu -- SPU multi-architecture support
target tfile -- Use a trace file as a target
task -- Use this command to switch between Ada tasks
thread -- Use this command to switch between threads
thread apply -- Apply a command to a list of threads
thread apply all -- Apply a command to all threads
thread find -- Find threads that match a regular expression
thread name -- Set the current thread's name
until -- Execute until the program reaches a source line greater than the current

Command class: stack

backtrace -- Print backtrace of all stack frames
bt -- Print backtrace of all stack frames
down -- Select and print stack frame called by this one
frame -- Select and print a stack frame
return -- Make selected stack frame return to its caller
select-frame -- Select a stack frame without printing anything
up -- Select and print stack frame that called this one

Command class: status

info -- Generic command for showing things about the program being debugged
info address -- Describe where symbol SYM is stored
info all-registers -- List of all registers and their contents
info args -- Argument variables of current stack frame
info auto-load -- Print current status of auto-loaded files
info auto-load gdb-scripts -- Print the list of automatically loaded sequences of commands
info auto-load libthread-db -- Print the list of loaded inferior specific libthread_db
info auto-load local-gdbinit -- Print whether current directory .gdbinit file has been loaded
info auto-load python-scripts -- Print the list of automatically loaded Python scripts
info auto-load-scripts -- Print the list of automatically loaded Python scripts
info auxv -- Display the inferior's auxiliary vector
info bookmarks -- Status of user-settable bookmarks
info breakpoints -- Status of specified breakpoints (all user-settable breakpoints if no argument)
info checkpoints -- IDs of currently known checkpoints
info classes -- All Objective-C classes
info common -- Print out the values contained in a Fortran COMMON block
info copying -- Conditions for redistributing copies of GDB
info dcache -- Print information on the dcache performance
info display -- Expressions to display when program stops
info extensions -- All filename extensions associated with a source language
info files -- Names of targets and files being debugged
info float -- Print the status of the floating point unit
info frame -- All about selected stack frame
info frame-filter -- List all registered Python frame-filters
info functions -- All function names
info handle -- What debugger does when program gets various signals
info inferiors -- IDs of specified inferiors (all inferiors if no argument)
info line -- Core addresses of the code for a source line
info locals -- Local variables of current stack frame
info macro -- Show the definition of MACRO
info macros -- Show the definitions of all macros at LINESPEC
info mem -- Memory region attributes
info os -- Show OS data ARG
info pretty-printer -- GDB command to list all registered pretty-printers
info probes -- Show available static probes
info probes all -- Show information about all type of probes
info probes stap -- Show information about SystemTap static probes
info proc -- Show /proc process information about any running process
info proc all -- List all available /proc info
info proc cmdline -- List command line arguments of the process
info proc cwd -- List current working directory of the process
info proc exe -- List absolute filename for executable of the process
info proc mappings -- List of mapped memory regions
info proc stat -- List process info from /proc/PID/stat
info proc status -- List process info from /proc/PID/status
info program -- Execution status of the program
info record -- Info record options
info registers -- List of integer registers and their contents
info scope -- List the variables local to a scope
info selectors -- All Objective-C selectors
info set -- Show all GDB settings
info sharedlibrary -- Status of loaded shared object libraries
info signals -- What debugger does when program gets various signals
info skip -- Display the status of skips
info source -- Information about the current source file
info sources -- Source files in the program
info stack -- Backtrace of the stack
info static-tracepoint-markers -- List target static tracepoints markers
info symbol -- Describe what symbol is at location ADDR
info target -- Names of targets and files being debugged
info tasks -- Provide information about all known Ada tasks
info terminal -- Print inferior's saved terminal status
info threads -- Display currently known threads
info tracepoints -- Status of specified tracepoints (all tracepoints if no argument)
info tvariables -- Status of trace state variables and their values
info type-printers -- GDB command to list all registered type-printers
info types -- All type names
info variables -- All global and static variable names
info vector -- Print the status of the vector unit
info vtbl -- Show the virtual function table for a C++ object
info warranty -- Various kinds of warranty you do not have
info watchpoints -- Status of specified watchpoints (all watchpoints if no argument)
info win -- List of all displayed windows
macro -- Prefix for commands dealing with C preprocessor macros
macro define -- Define a new C/C++ preprocessor macro
macro expand -- Fully expand any C/C++ preprocessor macro invocations in EXPRESSION
macro expand-once -- Expand C/C++ preprocessor macro invocations appearing directly in EXPRESSION
macro list -- List all the macros defined using the `macro define' command
macro undef -- Remove the definition of the C/C++ preprocessor macro with the given name
show -- Generic command for showing things about the debugger
show ada -- Generic command for showing Ada-specific settings
show ada trust-PAD-over-XVS -- Show whether an optimization trusting PAD types over XVS types is activated
show agent -- Show debugger's willingness to use agent as a helper
show annotate -- Show annotation_level
show architecture -- Show architecture of target
show args -- Show argument list to give program being debugged when it is started
show auto-load -- Show auto-loading specific settings
show auto-load gdb-scripts -- Show whether auto-loading of canned sequences of commands scripts is enabled
show auto-load libthread-db -- Show whether auto-loading inferior specific libthread_db is enabled
show auto-load local-gdbinit -- Show whether auto-loading .gdbinit script in current directory is enabled
show auto-load python-scripts -- Show the debugger's behaviour regarding auto-loaded Python scripts
show auto-load safe-path -- Show the list of files and directories that are safe for auto-loading
show auto-load scripts-directory -- Show the list of directories from which to load auto-loaded scripts
show auto-load-scripts -- Show the debugger's behaviour regarding auto-loaded Python scripts
show auto-solib-add -- Show autoloading of shared library symbols
show backtrace -- Show backtrace specific variables
show backtrace limit -- Show the upper bound on the number of backtrace levels
show backtrace past-entry -- Show whether backtraces should continue past the entry point of a program
show backtrace past-main -- Show whether backtraces should continue past "main"
show basenames-may-differ -- Show whether a source file may have multiple base names
show breakpoint -- Breakpoint specific settings
show breakpoint always-inserted -- Show mode for inserting breakpoints
show breakpoint auto-hw -- Show automatic usage of hardware breakpoints
show breakpoint condition-evaluation -- Show mode of breakpoint condition evaluation
show breakpoint pending -- Show debugger's behavior regarding pending breakpoints
show build-id-core-loads -- Show whether CORE-FILE loads the build-id associated files automatically
show build-id-verbose -- Show debugging level of the build-id locator
show can-use-hw-watchpoints -- Show debugger's willingness to use watchpoint hardware
show case-sensitive -- Show case sensitivity in name search
show charset -- Show the host and target character sets
show check -- Show the status of the type/range checker
show check range -- Show range checking
show check type -- Show strict type checking
show circular-trace-buffer -- Show target's use of circular trace buffer
show coerce-float-to-double -- Show coercion of floats to doubles when calling functions
show commands -- Show the history of commands you typed
show complaints -- Show max number of complaints about incorrect symbols
show confirm -- Show whether to confirm potentially dangerous operations
show convenience -- Debugger convenience ("$foo") variables and functions
show copying -- Conditions for redistributing copies of GDB
show cp-abi -- Show the ABI used for inspecting C++ objects
show data-directory -- Show GDB's data directory
show dcache -- Show dcachesettings
show dcache line-size -- Show dcache line size
show dcache size -- Show number of dcache lines
show debug -- Generic command for showing gdb debugging flags
show debug arch -- Show architecture debugging
show debug auto-load -- Show auto-load verifications debugging
show debug check-physname -- Show cross-checking of "physname" code against demangler
show debug coff-pe-read -- Show coff PE read debugging
show debug displaced -- Show displaced stepping debugging
show debug dwarf2-die -- Show debugging of the dwarf2 DIE reader
show debug dwarf2-read -- Show debugging of the dwarf2 reader
show debug entry-values -- Show entry values and tail call frames debugging
show debug expression -- Show expression debugging
show debug frame -- Show frame debugging
show debug infrun -- Show inferior debugging
show debug jit -- Show JIT debugging
show debug libthread-db -- Show libthread-db debugging
show debug lin-lwp -- Show debugging of GNU/Linux lwp module
show debug notification -- Show debugging of async remote notification
show debug observer -- Show observer debugging
show debug overload -- Show debugging of C++ overloading
show debug parser -- Show parser debugging
show debug record -- Show debugging of record/replay feature
show debug remote -- Show debugging of remote protocol
show debug serial -- Show serial debugging
show debug stap-expression -- Show SystemTap expression debugging
show debug symtab-create -- Show debugging of symbol table creation
show debug target -- Show target debugging
show debug timestamp -- Show timestamping of debugging messages
show debug xml -- Show XML parser debugging
show debug-file-directory -- Show the directories where separate debug symbols are searched for
show debugvarobj -- Show varobj debugging
show default-collect -- Show the list of expressions to collect by default
show demangle-style -- Show the current C++ demangling style
show detach-on-fork -- Show whether gdb will detach the child of a fork
show directories -- Show the search path for finding source files
show disable-randomization -- Show disabling of debuggee's virtual address space randomization
show disassemble-next-line -- Show whether to disassemble next source line or insn when execution stops
show disassembly-flavor -- Show the disassembly flavor
show disconnected-dprintf -- Show whether dprintf continues after GDB disconnects
show disconnected-tracing -- Show whether tracing continues after GDB disconnects
show displaced-stepping -- Show debugger's willingness to use displaced stepping
show dprintf-channel -- Show the channel to use for dynamic printf
show dprintf-function -- Show the function to use for dynamic printf
show dprintf-style -- Show the style of usage for dynamic printf
show editing -- Show editing of command lines as they are typed
show endian -- Show endianness of target
show environment -- The environment to give the program
show exec-direction -- Show direction of execution (forward/reverse)
show exec-done-display -- Show notification of completion for asynchronous execution commands
show exec-wrapper -- Show the wrapper for running programs
show extended-prompt -- Show the extended prompt
show extension-language -- Show mapping between filename extension and source language
show filename-display -- Show how to display filenames
show follow-exec-mode -- Show debugger response to a program call of exec
show follow-fork-mode -- Show debugger response to a program call of fork or vfork
show frame-filter -- Prefix command for 'show' frame-filter related operations
show frame-filter priority -- GDB command to show the priority of the specified frame-filter
show gnutarget -- Show the current BFD target
show height -- Show number of lines in a page for GDB output pagination
show history -- Generic command for showing command history parameters
show history expansion -- Show history expansion on command input
show history filename -- Show the filename in which to record the command history
show history save -- Show saving of the history record on exit
show history size -- Show the size of the command history
show host-charset -- Show the host character set
show inferior-tty -- Show terminal for future runs of program being debugged
show input-radix -- Show default input radix for entering numbers
show interactive-mode -- Show whether GDB's standard input is a terminal
show language -- Show the current source language
show libthread-db-search-path -- Show the current search path or libthread_db
show listsize -- Show number of source lines gdb will list by default
show logging -- Show logging options
show logging file -- Show the current logfile
show logging overwrite -- Show whether logging overwrites or appends to the log file
show logging redirect -- Show the logging output mode
show max-user-call-depth -- Show the max call depth for non-python user-defined commands
show may-insert-breakpoints -- Show permission to insert breakpoints in the target
show may-insert-fast-tracepoints -- Show permission to insert fast tracepoints in the target
show may-insert-tracepoints -- Show permission to insert tracepoints in the target
show may-interrupt -- Show permission to interrupt or signal the target
show may-write-memory -- Show permission to write into target memory
show may-write-registers -- Show permission to write into registers
show mem -- Memory regions settings
show mem  inaccessible-by-default -- Show handling of unknown memory regions
show multiple-symbols -- Show how the debugger handles ambiguities in expressions
show non-stop -- Show whether gdb controls the inferior in non-stop mode
show observer -- Show whether gdb controls the inferior in observer mode
show opaque-type-resolution -- Show resolution of opaque struct/class/union types (if set before loading symbols)
show osabi -- Show OS ABI of target
show output-radix -- Show default output radix for printing of values
show overload-resolution -- Show overload resolution in evaluating C++ functions
show pagination -- Show state of GDB output pagination
show paths -- Current search path for finding object files
show powerpc -- Various PowerPC-specific commands
show powerpc exact-watchpoints -- Show whether to use just one debug register for watchpoints on scalars
show powerpc soft-float -- Show whether to use a soft-float ABI
show powerpc vector-abi -- Show the vector ABI
show print -- Generic command for showing print settings
show print address -- Show printing of addresses
show print array -- Show prettyprinting of arrays
show print array-indexes -- Show printing of array indexes
show print asm-demangle -- Show demangling of C++/ObjC names in disassembly listings
show print demangle -- Show demangling of encoded C++/ObjC names when displaying symbols
show print elements -- Show limit on string chars or array elements to print
show print entry-values -- Show printing of function arguments at function entry
show print frame-arguments -- Show printing of non-scalar frame arguments
show print inferior-events -- Show printing of inferior events (e.g.
show print max-symbolic-offset -- Show the largest offset that will be printed in <symbol+1234> form
show print null-stop -- Show printing of char arrays to stop at first null char
show print object -- Show printing of object's derived type based on vtable info
show print pascal_static-members -- Show printing of pascal static members
show print pretty -- Show prettyprinting of structures
show print repeats -- Show threshold for repeated print elements
show print sevenbit-strings -- Show printing of 8-bit characters in strings as \nnn
show print static-members -- Show printing of C++ static members
show print symbol -- Show printing of symbol names when printing pointers
show print symbol-filename -- Show printing of source filename and line number with <symbol>
show print thread-events -- Show printing of thread events (such as thread start and exit)
show print type -- Generic command for showing type-printing settings
show print type methods -- Show printing of methods defined in classes
show print type typedefs -- Show printing of typedefs defined in classes
show print union -- Show printing of unions interior to structures
show print vtbl -- Show printing of C++ virtual function tables
show prompt -- Show gdb's prompt
show python -- Prefix command for python preference settings
show python print-stack -- Show the mode of Python stack printing on error
show radix -- Show the default input and output number radices
show ravenscar -- Prefix command for showing Ravenscar-specific settings
show ravenscar task-switching -- Show whether support for GNAT Ravenscar tasks is enabled
show record -- Show record options
show record full -- Show record options
show record full insn-number-max -- Show record/replay buffer limit
show record full memory-query -- Show whether query if PREC cannot record memory change of next instruction
show record full stop-at-limit -- Show whether record/replay stops when record/replay buffer becomes full
show record function-call-history-size -- Show number of functions to print in "record function-call-history"
show record instruction-history-size -- Show number of instructions to print in "record instruction-history"
show remote -- Remote protocol specific variables
show remote P-packet -- Show current use of remote protocol `P' (set-register) packet
show remote TracepointSource-packet -- Show current use of remote protocol `TracepointSource' (TracepointSource) packet
show remote X-packet -- Show current use of remote protocol `X' (binary-download) packet
show remote Z-packet -- Show use of remote protocol `Z' packets
show remote access-watchpoint-packet -- Show current use of remote protocol `Z4' (access-watchpoint) packet
show remote agent-packet -- Show current use of remote protocol `QAgent' (agent) packet
show remote allow-packet -- Show current use of remote protocol `QAllow' (allow) packet
show remote attach-packet -- Show current use of remote protocol `vAttach' (attach) packet
show remote binary-download-packet -- Show current use of remote protocol `X' (binary-download) packet
show remote breakpoint-commands-packet -- Show current use of remote protocol `BreakpointCommands' (breakpoint-commands) packet
show remote conditional-breakpoints-packet -- Show current use of remote protocol `ConditionalBreakpoints' (conditional-breakpoints) packet
show remote conditional-tracepoints-packet -- Show current use of remote protocol `ConditionalTracepoints' (conditional-tracepoints) packet
show remote disable-btrace-packet -- Show current use of remote protocol `Qbtrace:off' (disable-btrace) packet
show remote disable-randomization-packet -- Show current use of remote protocol `QDisableRandomization' (disable-randomization) packet
show remote enable-btrace-packet -- Show current use of remote protocol `Qbtrace:bts' (enable-btrace) packet
show remote exec-file -- Show the remote pathname for "run"
show remote fast-tracepoints-packet -- Show current use of remote protocol `FastTracepoints' (fast-tracepoints) packet
show remote fetch-register-packet -- Show current use of remote protocol `p' (fetch-register) packet
show remote get-thread-information-block-address-packet -- Show current use of remote protocol `qGetTIBAddr' (get-thread-information-block-address) packet
show remote get-thread-local-storage-address-packet -- Show current use of remote protocol `qGetTLSAddr' (get-thread-local-storage-address) packet
show remote hardware-breakpoint-limit -- Show the maximum number of target hardware breakpoints
show remote hardware-breakpoint-packet -- Show current use of remote protocol `Z1' (hardware-breakpoint) packet
show remote hardware-watchpoint-length-limit -- Show the maximum length (in bytes) of a target hardware watchpoint
show remote hardware-watchpoint-limit -- Show the maximum number of target hardware watchpoints
show remote hostio-close-packet -- Show current use of remote protocol `vFile:close' (hostio-close) packet
show remote hostio-open-packet -- Show current use of remote protocol `vFile:open' (hostio-open) packet
show remote hostio-pread-packet -- Show current use of remote protocol `vFile:pread' (hostio-pread) packet
show remote hostio-pwrite-packet -- Show current use of remote protocol `vFile:pwrite' (hostio-pwrite) packet
show remote hostio-readlink-packet -- Show current use of remote protocol `vFile:readlink' (hostio-readlink) packet
show remote hostio-unlink-packet -- Show current use of remote protocol `vFile:unlink' (hostio-unlink) packet
show remote install-in-trace-packet -- Show current use of remote protocol `InstallInTrace' (install-in-trace) packet
show remote interrupt-on-connect --             Show whether interrupt-sequence is sent to remote target when gdb connects to
show remote interrupt-sequence -- Show interrupt sequence to remote target
show remote kill-packet -- Show current use of remote protocol `vKill' (kill) packet
show remote library-info-packet -- Show current use of remote protocol `qXfer:libraries:read' (library-info) packet
show remote library-info-svr4-packet -- Show current use of remote protocol `qXfer:libraries-svr4:read' (library-info-svr4) packet
show remote memory-map-packet -- Show current use of remote protocol `qXfer:memory-map:read' (memory-map) packet
show remote memory-read-packet-size -- Show the maximum number of bytes per memory-read packet
show remote memory-write-packet-size -- Show the maximum number of bytes per memory-write packet
show remote noack-packet -- Show current use of remote protocol `QStartNoAckMode' (noack) packet
show remote osdata-packet -- Show current use of remote protocol `qXfer:osdata:read' (osdata) packet
show remote p-packet -- Show current use of remote protocol `p' (fetch-register) packet
show remote pass-signals-packet -- Show current use of remote protocol `QPassSignals' (pass-signals) packet
show remote program-signals-packet -- Show current use of remote protocol `QProgramSignals' (program-signals) packet
show remote query-attached-packet -- Show current use of remote protocol `qAttached' (query-attached) packet
show remote read-aux-vector-packet -- Show current use of remote protocol `qXfer:auxv:read' (read-aux-vector) packet
show remote read-btrace-packet -- Show current use of remote protocol `qXfer:btrace' (read-btrace) packet
show remote read-fdpic-loadmap-packet -- Show current use of remote protocol `qXfer:fdpic:read' (read-fdpic-loadmap) packet
show remote read-sdata-object-packet -- Show current use of remote protocol `qXfer:statictrace:read' (read-sdata-object) packet
show remote read-siginfo-object-packet -- Show current use of remote protocol `qXfer:siginfo:read' (read-siginfo-object) packet
show remote read-spu-object-packet -- Show current use of remote protocol `qXfer:spu:read' (read-spu-object) packet
show remote read-watchpoint-packet -- Show current use of remote protocol `Z3' (read-watchpoint) packet
show remote reverse-continue-packet -- Show current use of remote protocol `bc' (reverse-continue) packet
show remote reverse-step-packet -- Show current use of remote protocol `bs' (reverse-step) packet
show remote run-packet -- Show current use of remote protocol `vRun' (run) packet
show remote search-memory-packet -- Show current use of remote protocol `qSearch:memory' (search-memory) packet
show remote set-register-packet -- Show current use of remote protocol `P' (set-register) packet
show remote software-breakpoint-packet -- Show current use of remote protocol `Z0' (software-breakpoint) packet
show remote static-tracepoints-packet -- Show current use of remote protocol `StaticTracepoints' (static-tracepoints) packet
show remote supported-packets-packet -- Show current use of remote protocol `qSupported' (supported-packets) packet
show remote symbol-lookup-packet -- Show current use of remote protocol `qSymbol' (symbol-lookup) packet
show remote system-call-allowed -- Show if the host system(3) call is allowed for the target
show remote target-features-packet -- Show current use of remote protocol `qXfer:features:read' (target-features) packet
show remote threads-packet -- Show current use of remote protocol `qXfer:threads:read' (threads) packet
show remote trace-buffer-size-packet -- Show current use of remote protocol `QTBuffer:size' (trace-buffer-size) packet
show remote traceframe-info-packet -- Show current use of remote protocol `qXfer:trace-frame-info:read' (traceframe-info) packet
show remote unwind-info-block-packet -- Show current use of remote protocol `qXfer:uib:read' (unwind-info-block) packet
show remote verbose-resume-packet -- Show current use of remote protocol `vCont' (verbose-resume) packet
show remote write-siginfo-object-packet -- Show current use of remote protocol `qXfer:siginfo:write' (write-siginfo-object) packet
show remote write-spu-object-packet -- Show current use of remote protocol `qXfer:spu:write' (write-spu-object) packet
show remote write-watchpoint-packet -- Show current use of remote protocol `Z2' (write-watchpoint) packet
show remoteaddresssize -- Show the maximum size of the address (in bits) in a memory packet
show remotebaud -- Show baud rate for remote serial I/O
show remotebreak -- Show whether to send break if interrupted
show remotecache -- Show cache use for remote targets
show remoteflow -- Show use of hardware flow control for remote serial I/O
show remotelogbase -- Show numerical base for remote session logging
show remotelogfile -- Show filename for remote session recording
show remotetimeout -- Show timeout limit to wait for target to respond
show remotewritesize -- Show the maximum number of bytes per memory write packet (deprecated)
show schedule-multiple -- Show mode for resuming threads of all processes
show scheduler-locking -- Show mode for locking scheduler during execution
show script-extension -- Show mode for script filename extension recognition
show serial -- Show default serial/parallel port configuration
show solib-absolute-prefix -- Show the current system root
show solib-search-path -- Show the search path for loading non-absolute shared library symbol files
show stack-cache -- Show cache use for stack access
show step-mode -- Show mode of the step operation
show stop-on-solib-events -- Show stopping for shared library events
show struct-convention -- Show the convention for returning small structs
show substitute-path -- Usage: show substitute-path [FROM]
show sysroot -- Show the current system root
show target-async -- Show whether gdb controls the inferior in asynchronous mode
show target-charset -- Show the target character set
show target-file-system-kind -- Show assumed file system kind for target reported file names
show target-wide-charset -- Show the target wide character set
show tcp -- TCP protocol specific variables
show tcp auto-retry -- Show auto-retry on socket connect
show tcp connect-timeout -- Show timeout limit for socket connection
show tdesc -- Show target description specific variables
show tdesc filename -- Show the file to read for an XML target description
show trace-buffer-size -- Show requested size of trace buffer
show trace-commands -- Show state of GDB CLI command tracing
show trace-notes -- Show the notes string to use for current and future trace runs
show trace-stop-notes -- Show the notes string to use for future tstop commands
show trace-user -- Show the user name to use for current and future trace runs
show trust-readonly-sections -- Show mode for reading from readonly sections
show tui -- TUI configuration variables
show tui active-border-mode -- Show the attribute mode to use for the active TUI window border
show tui border-kind -- Show the kind of border for TUI windows
show tui border-mode -- Show the attribute mode to use for the TUI window borders
show unwind-on-terminating-exception -- Show unwinding of stack if std::terminate() is called while in a call dummy
show unwindonsignal -- Show unwinding of stack if a signal is received while in a call dummy
show use-deprecated-index-sections -- Show whether to use deprecated gdb_index sections
show user -- Show definitions of non-python user defined commands
show values -- Elements of value history around item number IDX (or last ten)
show verbose -- Show verbosity
show version -- Show what version of GDB this is
show warranty -- Various kinds of warranty you do not have
show watchdog -- Show watchdog timer
show width -- Show number of characters where GDB should wrap lines of its output
show write -- Show writing into executable and core files

Command class: support

! -- Execute the rest of the line as a shell command
add-auto-load-safe-path -- Add entries to the list of directories from which it is safe to auto-load files
add-auto-load-scripts-directory -- Add entries to the list of directories from which to load auto-loaded scripts
alias -- Define a new command that is an alias of an existing command
apropos -- Search for commands matching a REGEXP
define -- Define a new command name
document -- Document a user-defined command
dont-repeat -- Don't repeat this command
down-silently -- Same as the `down' command
echo -- Print a constant string
help -- Print list of commands
if -- Execute nested commands once IF the conditional expression is non zero
interpreter-exec -- Execute a command in an interpreter
make -- Run the ``make'' program using the rest of the line as arguments
overlay -- Commands for debugging overlays
overlay auto -- Enable automatic overlay debugging
overlay list-overlays -- List mappings of overlay sections
overlay load-target -- Read the overlay mapping state from the target
overlay manual -- Enable overlay debugging
overlay map-overlay -- Assert that an overlay section is mapped
overlay off -- Disable overlay debugging
overlay unmap-overlay -- Assert that an overlay section is unmapped
quit -- Exit gdb
shell -- Execute the rest of the line as a shell command
source -- Read commands from a file named FILE
up-silently -- Same as the `up' command
while -- Execute nested commands WHILE the conditional expression is non zero

Command class: tracepoints

actions -- Specify the actions to be taken at a tracepoint
collect -- Specify one or more data items to be collected at a tracepoint
end -- Ends a list of commands or actions
passcount -- Set the passcount for a tracepoint
save-tracepoints -- Save current tracepoint definitions as a script
tdump -- Print everything collected at the current tracepoint
teval -- Specify one or more expressions to be evaluated at a tracepoint
tfind -- Select a trace frame;
tfind end -- De-select any trace frame and resume 'live' debugging
tfind line -- Select a trace frame by source line
tfind none -- De-select any trace frame and resume 'live' debugging
tfind outside -- Select a trace frame whose PC is outside the given range (exclusive)
tfind pc -- Select a trace frame by PC
tfind range -- Select a trace frame whose PC is in the given range (inclusive)
tfind start -- Select the first trace frame in the trace buffer
tfind tracepoint -- Select a trace frame by tracepoint number
tsave -- Save the trace data to a file
tstart -- Start trace data collection
tstatus -- Display the status of the current trace data collection
tstop -- Stop trace data collection
tvariable -- Define a trace state variable
while-stepping -- Specify single-stepping behavior at a tracepoint

Command class: user-defined


Unclassified commands

add-inferior -- Add a new inferior
clone-inferior -- Clone inferior ID
eval -- Convert "printf format string"
function -- Placeholder command for showing help on convenience functions
function _memeq -- $_memeq - compare bytes of memory
function _regex -- $_regex - check if a string matches a regular expression
function _streq -- $_streq - check string equality
function _strlen -- $_strlen - compute string length
function caller_is -- Return True if the calling function's name is equal to a string
function caller_matches -- Return True if the calling function's name matches a string
function in_scope -- Return True if all the given variables or macros are in scope
jit-reader-load -- Load FILE as debug info reader and unwinder for JIT compiled code
jit-reader-unload -- Unload the currently loaded JIT debug info reader
pahole -- Show the holes in a structure
remove-inferiors -- Remove inferior ID (or list of IDs)
unset -- Complement to certain "set" commands
unset environment -- Cancel environment variable VAR for the program
unset exec-wrapper -- Disable use of an execution wrapper
unset substitute-path -- Usage: unset substitute-path [FROM]
unset tdesc -- Unset target description specific variables
unset tdesc filename -- Unset the file to read for an XML target description