shell脚本安装rocketmq主从样例

自定义参数

ROCKETMQ_NAME= #服务全名
ROCKETMQ_PATH= #安装路径
TEMP_PATH= #临时目录
USER_NAME= #启动用户

部署参数检查

#!/bin/bash

# 检查参数是否设置
echo "=====检查参数是否设置====="
if [ ! $ROCKETMQ_PATH ];then
	echo "=====$ROCKETMQ_PATH 此参数未设置，请检查！====="
    exit 1
fi

if [ ! $ROCKETMQ_NAME ];then
	echo "=====$ROCKETMQ_NAME 此参数未设置，请检查！====="
    exit 1
fi

isServerExist=$(ps -ef | grep $ROCKETMQ_NAME | grep -v grep | awk '{print $2}' | wc -l)

# 检查服务是否已经安装
echo "=====检查服务是否已经安装====="
if [ "${isServerExist}" != "0" ]; then
    echo "$ROCKETMQ_NAME 服务已启动，请先卸载"  
    exit 1
else
    echo "$ROCKETMQ_NAME 服务未启动，符合预期！" 
fi

# 检查目标目录是否存在
echo "=====检查目标目录是否存在====="
if [ ! -d $ROCKETMQ_PATH ];then
	echo "=====$ROCKETMQ_PATH 目录不存在，创建目录====="
	mkdir -p $ROCKETMQ_PATH
fi

 echo "=====部署前检查通过====="
 

上传并解压安装包

#!/bin/bash
pwd

# 解压安装包到指定目录
echo "=====解压安装包到指定目录====="
unzip -o ${ROCKETMQ_NAME}.zip -d $ROCKETMQ_PATH
echo "=====查看解压后的内容====="
ls $ROCKETMQ_PATH/$ROCKETMQ_NAME

主从设置-a主b从+启停脚本

#!/bin/bash

#主机A上启动a主，b从
echo "=====开始设置启动a主b从======"
echo "#!/bin/bash
cd $ROCKETMQ_PATH/$ROCKETMQ_NAME/bin
chmod +x $ROCKETMQ_PATH/$ROCKETMQ_NAME/bin/*
nohup sh mqnamesrv >nohup.out 2>&1 &
nohup sh mqbroker -c $ROCKETMQ_PATH/$ROCKETMQ_NAME/conf/2m-2s-sync/broker-a.properties >nohup.out 2>&1 &
sh mqbroker -c $ROCKETMQ_PATH/$ROCKETMQ_NAME/conf/2m-2s-sync/broker-b-s.properties >nohup.out 2>&1
" > $ROCKETMQ_PATH/$ROCKETMQ_NAME/bin/rocketmq.sh
chmod +x $ROCKETMQ_PATH/$ROCKETMQ_NAME/bin/rocketmq.sh

chown -R ${USER_NAME}:${USER_NAME} $ROCKETMQ_PATH/$ROCKETMQ_NAME
echo "=====开始设置启动脚本====="
# 设置启动脚本
cat > /usr/lib/systemd/system/rocketmq.service <<-EOF
[Unit]
Description=rocketmq
 
[Service]
Type=simple
User=${USER_NAME}
Environment=JAVA_HOME=/usr/local/jdk
EnvironmentFile=-$ROCKETMQ_PATH/$ROCKETMQ_NAME/bin
ExecStart=/usr/bin/sh $ROCKETMQ_PATH/$ROCKETMQ_NAME/bin/rocketmq.sh
Restart=on-failure
 
[Install]
WantedBy=multi-user.target
EOF
echo "=====启动并设置开机自启====="
systemctl daemon-reload
systemctl start rocketmq.service
systemctl enable rocketmq.service
echo "=====启停方式：systemctl start|stop|restart rocketmq====="

主从设置-b主a从+启停脚本

#!/bin/bash

#主机B上启动b主，a从
echo "=====开始设置b主a从====="
echo "#!/bin/bash
cd $ROCKETMQ_PATH/$ROCKETMQ_NAME/bin
chmod +x $ROCKETMQ_PATH/$ROCKETMQ_NAME/bin/*
nohup sh mqnamesrv >nohup.out 2>&1 &
nohup sh mqbroker -c $ROCKETMQ_PATH/$ROCKETMQ_NAME/conf/2m-2s-sync/broker-b.properties >nohup.out 2>&1 &
sh mqbroker -c $ROCKETMQ_PATH/$ROCKETMQ_NAME//conf/2m-2s-sync/broker-a-s.properties >nohup.out 2>&1
" > $ROCKETMQ_PATH/$ROCKETMQ_NAME/bin/rocketmq.sh
chmod +x $ROCKETMQ_PATH/$ROCKETMQ_NAME/bin/rocketmq.sh

chown -R ${USER_NAME}:${USER_NAME} $ROCKETMQ_PATH/$ROCKETMQ_NAME
echo "=====开始设置启动脚本====="
# 设置启动脚本
cat > /usr/lib/systemd/system/rocketmq.service <<-EOF
[Unit]
Description=rocketmq
 
[Service]
Type=simple
User=${USER_NAME}
Environment=JAVA_HOME=/usr/local/jdk
EnvironmentFile=-$ROCKETMQ_PATH/$ROCKETMQ_NAME/bin
ExecStart=/usr/bin/sh $ROCKETMQ_PATH/$ROCKETMQ_NAME/bin/rocketmq.sh
Restart=on-failure
 
[Install]
WantedBy=multi-user.target
EOF
echo "=====启动并设置开机自启====="
systemctl daemon-reload
systemctl start rocketmq.service
systemctl enable rocketmq.service
echo "=====启停方式：systemctl start|stop|restart rocketmq====="

验证服务

#!/bin/bash

#按照进程判断，默认启动时间2分钟，判断两次，按需修改循环次数
echo "=====开始判断服务是否已启动成功====="
    for((i=1;i<=12;i++));
    do
        sleep 10
        ISSTART=$(ps -ef | grep $ROCKETMQ_NAME | grep -v grep | awk '{print $2}' | wc -l)
        # rocketmq正常启动成功应该有8个进程，若同时安装了rocketmq-console，则有9个进程，故判断条件为进程数大于等于8
        if [ "$ISSTART" -ge "8" ]; then
            echo "发现服务进程，为确保服务真正启动成功，等待15秒后进行第二次判断！"
                sleep 15
                ISSTART=$(ps -ef | grep $ROCKETMQ_NAME | grep -v grep | awk '{print $2}' | wc -l)
                if [ "$ISSTART" -ge "8" ]; then
                    echo "等待15秒后端口仍存活，服务第二次判断通过，服务启动成功！"
                    exit 0
                else
                    echo "等待15秒后端口未找到，服务第二次判断失败，服务启动失败！"
                    exit 1
                fi
        else
            echo "服务启动中，请等待！"
        fi
    done
    echo "等待2分钟后未发现服务进程，服务启动失败！"
    exit 1

清理临时目录安装包

rm -rf ${TEMP_PATH}
mkdir -p ${TEMP_PATH}