多点双向重发布实验

一、配置 IP 地址
二、起协议：
R1：
[R1]rip 1
[R1-rip-1]ve 2
[R1-rip-1]un su
[R1-rip-1]net 12.0.0.0 [R1-rip-1]net 14.0.0.0 [R1-rip-1]net 1.0.0.0
R2:
[R2]rip 1 [R2-rip-1]ver 2 [R2-rip-1]undo su [R2-rip-1]net 12.0.0.0 [R2-rip-1]net 2.0.0.0 [R2-rip-1]q [R2]ospf 1 router-id 2.2.2.2 [R2-ospf-1-area-0.0.0.0]network 23.1.1.1 0.0.0.0
R3:
[R3]ospf 1 router-id 3.3.3.3 [R3-ospf-1]area 0 [R3-ospf-1-area-0.0.0.0]network 3.3.3.3 0.0.0.0 [R3-ospf-1-area-0.0.0.0]network 23.1.1.2 0.0.0.0 [R3-ospf-1-area-0.0.0.0]network 34.1.1.1 0.0.0.0
R4:
[r4]ospf 1 router-id 4.4.4.4 [r4-ospf-1]area 0 [r4-ospf-1-area-0.0.0.0]network 4.4.4.4 0.0.0.0 [r4-ospf-1-area-0.0.0.0]network 34.1.1.2 0.0.0.0 [r4]rip 1 [r4-rip-1]version 2 [r4-rip-1]undo summary [r4-rip-1]net 14.0.0.0
三、做双向重发布： R2: [R2]rip 1 [R2-rip-1]import-route ospf 1 [R2]ospf 1 [R2-ospf-1]import-route rip 1 R4: [r4]rip 1 [r4-rip-1]import-route ospf 1 [r4-rip-1]ospf 1 [r4-ospf-1]import-route rip 1
四、更改 R4 上面环回接口类型为 brocast 避免该网段重复出现掩码不同的路由 [r4]int LoopBack1 [r4-LoopBack1]ospf network-type broadcast
五、抓取流量，做策略
R2:
[r2]ip ip-prefix aa permit 34.1.1.0 24
[r2]ip ip-prefix aa permit 4.4.4.4 24
[r2]int g0/0/0
[r2-GigabitEthernet0/0/0]rip metricout ip-prefix aa 2
[r2]ip ip-prefix bb permit 12.1.1.0 24
[r2]ip ip-prefix bb permit 2.2.2.0 24
[r2]route-policy bb permit node 10
[r2-route-policy]if-match ip-prefix bb
r2-route-policy]apply cost-type type-1
[r2-route-policy]q
[r2]route-policy bb permit node 20
[r2-route-policy]ospf 1
[r2-ospf-1]import-route rip 1 route-policy bb
R4:
[r4]ip ip-prefix aaa permit 23.1.1.0 24
[r4]int g0/0/0
[r4-GigabitEthernet0/0/0]rip metricin ip-prefix aaa 2
[r4-GigabitEthernet0/0/0]q
[r4]int g0/0/0
[r4-GigabitEthernet0/0/0]rip metricout ip-prefix aaa 2
[r4-GigabitEthernet0/0/0]q
[r4]ip ip-prefix bb permit 14.1.1.0 24
[r4]route-policy bb permit node 10
[r4-route-policy]if-match ip-prefix bb
[r4-route-policy]apply cost-type type-1
[r4-route-policy]q [r4]route-policy bb permit node 20.
[r4-route-policy]q
[r4]ospf 1
[r4-ospf-1]import-route rip 1 route-policy bb
六：检测路由表
R1：
R3：