端口隔离配置和VRRP

一、端口隔离

测试环境：

[s1]port-group group-member g0/0/1 g0/0/2
[s1-port-group]port    
[s1-port-group]port-is    
[s1-port-group]port-isolate en    
[s1-port-group]port-isolate enable g    
[s1-port-group]port-isolate enable group 1
[s1-GigabitEthernet0/0/1]port-isolate enable group 1
[s1-GigabitEthernet0/0/2]port-isolate enable group 1
二、浮动路由

测试环境：

 [r1]ip route-static 192.168.4.0 24 192.168.3.2 preference 70

 三、VRRP

测试环境：

[s1-vlan10]q
[s1]port-g    
[s1]port-group g    
[s1]port-group group-member g0/0/1 to g0/0/3
[s1-port-group]port link    
[s1-port-group]port link-ty    
[s1-port-group]port link-type acc    
[s1-port-group]port link-type access 
[s1-GigabitEthernet0/0/1]port link-type access 
[s1-GigabitEthernet0/0/2]port link-type access 
[s1-GigabitEthernet0/0/3]port link-type access 
[s1-port-group]port    
[s1-port-group]port de    
[s1-port-group]port default vlan 10
[s1-GigabitEthernet0/0/1]port default vlan 10
[s1-GigabitEthernet0/0/2]port default vlan 10
[s1-GigabitEthernet0/0/3]port default vlan 10

[Huawei]sysn r1
[r1]int    
[r1]interface g0/0/1
[r1-GigabitEthernet0/0/1]q
[r1]int    
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]ip add    
[r1-GigabitEthernet0/0/0]ip address 192.168.1.251 24
 

[Huawei]sysn r2
[r2]int    
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]ip add    
[r2-GigabitEthernet0/0/0]ip address 192.168.1.252 24
 

[r1-GigabitEthernet0/0/0]vrrp vrid 10 virtual-ip 192.168.1.254
[r1-GigabitEthernet0/0/0]vrrp vrid 10 p    
[r1-GigabitEthernet0/0/0]vrrp vrid 10 pri    
[r1-GigabitEthernet0/0/0]vrrp vrid 10 priority 130

[r2-GigabitEthernet0/0/0]vrrp vrid 10 virtual-ip 192.168.1.254