MGRE/OSPF综合实验

1.规划IP，并给所有路由器均配置一个环回接口；

2.构建R1/4/5为全连的MGRE结构，题目要求全连，R1/R4/R5需要互相注册；

R1配置
[R1-GigabitEthernet0/0/0]int t0/0/0
[R1-Tunnel0/0/0]ip add 7.0.0.1 255.255.255.0
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp
[R1-Tunnel0/0/0]source 16.0.0.1
[R1-Tunnel0/0/0]ospf network-type broadcast
[R1-Tunnel0/0/0]nhrp entry multicast dynamic
[R1-Tunnel0/0/0]nhrp entry 7.0.0.4 46.0.0.2 register
[R1-Tunnel0/0/0]nhrp entry 7.0.0.5 56.0.0.2
[R1]ip route-static 0.0.0.0 0 16.0.0.2
[R1]ospf 1 router-id 1.1.1.1
[R1-ospf-1-area-0.0.0.0]network 7.0.0.1 0.0.0.0
[R1-ospf-1-area-0.0.0.0]network 8.0.0.1 0.0.0.0
内网访问服务器R6
[R1]acl 2000
[R1-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255
[R1]int g0/0/1
[R1-GigabitEthernet0/0/1]nat outbound 2000
[R1-GigabitEthernet0/0/1]int g0/0/0
[R1-GigabitEthernet0/0/0]nat outbound 2000

R4配置
[R4]int t0/0/0
[R4-Tunnel0/0/0]ip add 7.0.0.4 255.255.255.0
[R4-Tunnel0/0/0]tunnel-protocol gre p2mp
[R4-Tunnel0/0/0]source 46.0.0.2
[R4-Tunnel0/0/0]ospf network-type broadcast
[R4-Tunnel0/0/0]nhrp network-id 100
[R4-Tunnel0/0/0]nhrp entry 7.0.0.1 16.0.0.1 register
[R4-Tunnel0/0/0]nhrp entry 7.0.0.5 56.0.0.2 register
[R4]acl 2000
[R4-acl-basic-2000]rule permit source 192.168.4.0 0.0.0.255
[R4]ip route-static 0.0.0.0 0 46.0.0.1
[R4]ospf 1 router-id 4.4.4.4
[R4-ospf-1]area 0
[R4-ospf-1-area-0.0.0.0]network 192.168.4.0 0.0.0.255

R5配置
[R5]int t0/0/0
[R5-Tunnel0/0/0]ip add 7.0.0.5 255.255.255.0
[R5-Tunnel0/0/0]tunnel-protocol gre p2mp
[R5-Tunnel0/0/0]source 56.0.0.2
[R5-Tunnel0/0/0]ospf network-type broadcast
[R5-Tunnel0/0/0]nhrp entry multicast dynamic
[R5-Tunnel0/0/0]nh network-id 100
[R5-Tunnel0/0/0]nhrp entry 7.0.0.1 16.0.0.2 register
[R5-Tunnel0/0/0]nhrp entry 7.0.0.4 46.0.0.2 register
[R5]acl 2000
[R5-acl-basic-2000]rule permit source 192.168.5.0 0.0.0.255
[R5]ip route-static 0.0.0.0 0 56.0.0.1
启用OSPF
[R5]ospf 1 router-id 5.5.5.5
[R5-ospf-1]area 0
[R5-ospf-1-area-0.0.0.0]network 7.0.0.5 0.0.0.0
[R5-ospf-1-area-0.0.0.0]network 192.168.5.0 0.0.0.255

3.R1/2/3为星型的拓扑结构，R1为中心站点

R1配置
[R1]int t0/0/1
[R1-Tunnel0/0/1]ip add 8.0.0.1 255.255.255.0
[R1-Tunnel0/0/1]source 16.1.1.1
[R1-Tunnel0/0/1]ospf network-type broadcast
[R1-Tunnel0/0/1]nhrp entry multicast dynamic
[R1-Tunnel0/0/1]nhrp network-id 200

R2配置
[R2]int t0/0/1
[R2-Tunnel0/0/1]ip add 8.0.0.2 255.255.255.0
[R2-Tunnel0/0/1]tunnel-protocol gre p2mp
[R2-Tunnel0/0/1]source 26.0.0.2
[R2-Tunnel0/0/1]ospf network-type broadcast
[R2-Tunnel0/0/1]ospf dr-priority 0
[R2-Tunnel0/0/1]nhrp network-id 200
[R2-Tunnel0/0/1]nhrp entry 8.0.0.1 16.0.0.1 register
[R2-ospf-1-area-0.0.0.0]network 8.0.0.2 0.0.0.0
[R2-ospf-1-area-0.0.0.0]network 192.168.2.0 0.0.0.255

R3配置
[R3]int t0/0/1
[R3-Tunnel0/0/1]ip add 8.0.0.3 255.255.255.0
[R3-Tunnel0/0/1]tunnel-protocol gre p2mp
[R3-Tunnel0/0/1]ospf network-type broadcast
[R3-Tunnel0/0/1]ospf dr-priority 0
[R3-Tunnel0/0/1]nhrp network-id 101
[R3-Tunnel0/0/1]nhrp entry 8.0.0.1 16.0.0.1 register
[R3]ospf 1 router-id 3.3.3.3
[R3-ospf-1-area-0.0.0.0]network 8.0.0.3 0.0.0.0
[R3-ospf-1-area-0.0.0.0]network 192.168.3.0 0.0.0.255

实验完成