文件读写操作:
一.获得控制台用户输入的信息
public String getInputMessage() throws IOException...{
System.out.println("请输入您的命令∶");
byte buffer[]=new byte[1024];
int count=System.in.read(buffer);
char[] ch=new char[count-2];//最后两位为结束符,删去不要
for(int i=0;i<count-2;i++)
ch[i]=(char)buffer[i];
String str=new String(ch);
return str;
}
可以返回用户输入的信息,不足之处在于不支持中文输入,有待进一步改进。
二.复制文件
1.以文件流的方式复制文件
public void copyFile(String src,String dest) throws IOException...{
FileInputStream in=new FileInputStream(src);
File file=new File(dest);
if(!file.exists())
file.createNewFile();
FileOutputStream out=new FileOutputStream(file);
int c;
byte buffer[]=new byte[1024];
while((c=in.read(buffer))!=-1)...{
for(int i=0;i<c;i++)
out.write(buffer[i]);
}
in.close();
out.close();
}
该方法经过测试,支持中文处理,并且可以复制多种类型,比如txt,xml,jpg,doc等多种格式
三.写文件
1.利用PrintStream写文件
public void PrintStreamDemo()...{
try ...{
FileOutputStream out=new FileOutputStream("D:/test.txt");
PrintStream p=new PrintStream(out);
for(int i=0;i<10;i++)
p.println("This is "+i+" line");
} catch (FileNotFoundException e) ...{
e.printStackTrace();
}
}
2.利用StringBuffer写文件
public void StringBufferDemo() throws IOException......{
File file=new File("/root/sms.log");
if(!file.exists())
file.createNewFile();
FileOutputStream out=new FileOutputStream(file,true);
for(int i=0;i<10000;i++)......{
StringBuffer sb=new StringBuffer();
sb.append("这是第"+i+"行:前面介绍的各种方法都不关用,为什么总是奇怪的问题 ");
out.write(sb.toString().getBytes("utf-8"));
}
out.close();
}
该方法可以设定使用何种编码,有效解决中文问题。
四.文件重命名
public void renameFile(String path,String oldname,String newname)...{
if(!oldname.equals(newname))...{//新的文件名和以前文件名不同时,才有必要进行重命名
File oldfile=new File(path+"/"+oldname);
File newfile=new File(path+"/"+newname);
if(newfile.exists())//若在该目录下已经有一个文件和新文件名相同,则不允许重命名
System.out.println(newname+"已经存在!");
else...{
oldfile.renameTo(newfile);
}
}
}
五.转移文件目录
转移文件目录不等同于复制文件,复制文件是复制后两个目录都存在该文件,而转移文件目录则是转移后,只有新目录中存在该文件。
public void changeDirectory(String filename,String oldpath,String newpath,boolean cover)...{
if(!oldpath.equals(newpath))...{
File oldfile=new File(oldpath+"/"+filename);
File newfile=new File(newpath+"/"+filename);
if(newfile.exists())...{//若在待转移目录下,已经存在待转移文件
if(cover)//覆盖
oldfile.renameTo(newfile);
else
System.out.println("在新目录下已经存在:"+filename);
}
else...{
oldfile.renameTo(newfile);
}
}
}
六.读文件
1.利用FileInputStream读取文件
public String FileInputStreamDemo(String path) throws IOException...{
File file=new File(path);
if(!file.exists()||file.isDirectory())
throw new FileNotFoundException();
FileInputStream fis=new FileInputStream(file);
byte[] buf = new byte[1024];
StringBuffer sb=new StringBuffer();
while((fis.read(buf))!=-1)...{
sb.append(new String(buf));
buf=new byte[1024];//重新生成,避免和上次读取的数据重复
}
return sb.toString();
}
2.利用BufferedReader读取
在IO操作,利用BufferedReader和BufferedWriter效率会更高一点
public String BufferedReaderDemo(String path) throws IOException...{
File file=new File(path);
if(!file.exists()||file.isDirectory())
throw new FileNotFoundException();
BufferedReader br=new BufferedReader(new FileReader(file));
String temp=null;
StringBuffer sb=new StringBuffer();
temp=br.readLine();
while(temp!=null)...{
sb.append(temp+" ");
temp=br.readLine();
}
return sb.toString();
}
3.利用dom4j读取xml文件
public Document readXml(String path) throws DocumentException, IOException...{
File file=new File(path);
BufferedReader bufferedreader = new BufferedReader(new FileReader(file));
SAXReader saxreader = new SAXReader();
Document document = (Document)saxreader.read(bufferedreader);
bufferedreader.close();
return document;
}
七.创建文件(文件夹)
1.创建文件夹
public void createDir(String path)...{
File dir=new File(path);
if(!dir.exists())
dir.mkdir();
}
2.创建新文件
public void createFile(String path,String filename) throws IOException...{
File file=new File(path+"/"+filename);
if(!file.exists())
file.createNewFile();
}
八.删除文件(目录)
1.删除文件
public void delFile(String path,String filename)...{
File file=new File(path+"/"+filename);
if(file.exists()&&file.isFile())
file.delete();
}
2.删除目录
要利用File类的delete()方法删除目录时,必须保证该目录下没有文件或者子目录,否则删除失败,因此在实际应用中,我们要删除目录,必须利用递归删除该目录下的所有子目录和文件,然后再删除该目录。
public void delDir(String path)...{
File dir=new File(path);
if(dir.exists())...{
File[] tmp=dir.listFiles();
for(int i=0;i<tmp.length;i++)...{
if(tmp[i].isDirectory())...{
delDir(path+"/"+tmp[i].getName());
}
else...{
tmp[i].delete();
}
}
dir.delete();
}
}
九、read
JDK中的解释
public int read(byte[] b)
throws IOException
-
从此输入流中将最多
b.length
个字节的数据读入一个 byte 数组中。在某些输入可用之前,此方法将阻塞。 -
-
覆盖:
-
类
InputStream
中的read
-
类
-
-
参数:
-
b
- 存储读取数据的缓冲区。
返回:
-
读入缓冲区的字节总数,如果因为已经到达文件末尾而没有更多的数据,则返回
-1
。
抛出:
-
IOException
- 如果发生 I/O 错误。
另请参见:
-
InputStream.read(byte[], int, int)
-
1.buffer数组的长度就是read执行一次读入的大小,如果成功,那么数组存储读入的数据,并且方法返回读入数据的大小(就是数组大小)。
2、如果剩余读入的数据大小(利用available()来判定剩余数据的大小)小于数组长度,那么read()返回值就是-1。
-
3、重要的是,read循环读入时候,并不会先清空数组后再读入,而是直接覆盖需要的数组元素,如果read()方法返回是-1,那么用于存储的数组后几位将是上一次循环中read()所存储的内容,不能完全覆盖掉数组中的数据。所以最后一次不能直接write(Buffer),而是应该计算出剩余数据大小并且fileOutputStream.write(remain);而不使用buffer。
-
String name = "AAAA.txt";
String lujing = "1"+"/"+"2";//定义路径
File a = new File(lujing,name);a.getParentFile().mkdirs(); //这里如果不加getParentFile(),创建的文件夹为"1/2/AAAA.txt/"
那么,a的意义就是“1/2/AAAA.txt”。
这里a是File,但是File这个类在Java里表示的不只是文件,虽然File在英语里是文件的意思。Java里,File至少可以表示文件或文件夹(大概还有可以表示系统设备什么的,这里不考虑,只考虑文件和文件夹)。
也就是说,在“1/2/AAAA.txt”真正出现在磁盘结构里之前,它既可以表示这个文件,也可以表示这个路径的文件夹。那么,如果没有getParentFile(),直接执行a.mkdirs(),就是说,创建“1/2/AAAA.txt”代表的文件夹,也就是“1/2/AAAA.txt/”,在此之后,执行a.createNewFile(),试图创建a文件,然而以a为名的文件夹已经存在了,所以createNewFile()实际是执行失败的。你可以用System.out.println(a.createNewFile())这样来检查是不是真正创建文件成功。
所以,这里,你想要创建的是“1/2/AAAA.txt”这个文件。在创建AAAA.txt之前,必须要1/2这个目录存在。所以,要得到1/2,就要用a.getParentFile(),然后要创建它,也就是a.getParentFile().mkdirs()。在这之后,a作为文件所需要的文件夹大概会存在了(有特殊情况会无法创建的,这里不考虑),就执行a.createNewFile()创建a文件。 -
十一、RandomAccessFile的使用
Java的RandomAccessFile提供对文件的读写功能,与普通的输入输出流不一样的是RamdomAccessFile可以任意的访问文件的任何地方。这就是“Random”的意义所在。
RandomAccessFile的对象包含一个记录指针,用于标识当前流的读写位置,这个位置可以向前移动,也可以向后移动。RandomAccessFile包含两个方法来操作文件记录指针。
long getFilePoint():记录文件指针的当前位置。
void seek(long pos):将文件记录指针定位到pos位置。
RandomAccessFile包含InputStream的三个read方法,也包含OutputStream的三个write方法。同时RandomAccessFile还包含一系列的readXxx和writeXxx方法完成输入输出。
RandomAccessFile的构造方法如下
mode的值有四个
"r":以只读文方式打开指定文件。如果你写的话会有IOException。
"rw":以读写方式打开指定文件,不存在就创建新文件。
"rws":不介绍了。
"rwd":也不介绍。
十、java中的getParentFile