编译hikey bootloader

交叉编译工具链：

下载：

http://releases.linaro.org/15.02/components/toolch...
http://releases.linaro.org/15.02/components/toolch...

安装：

mkdir arm-tc arm64-tc
tar --strip-components=1 -C ${PWD}/arm-tc -xf gcc-linaro-4.9-*-x86_64_aarch64-linux-gnu.tar.xz
tar --strip-components=1 -C ${PWD}/arm64-tc -xf gcc-linaro-4.9-*-x86_64_arm-linux-gnueabihf.tar.xz
export PATH="${PWD}/arm-tc/bin:${PWD}/arm64-tc/bin:$PATH"

bootloader代码下载:

git clone -b hikey --depth 1 https://github.com/96boards/edk2.git linaro-edk2
git clone -b hikey --depth 1 https://github.com/96boards-hikey/arm-trusted-firmware.git
git clone -b hikey --depth 1 https://github.com/96boards/LinaroPkg.git
git clone --depth 1 https://github.com/96boards/l-loader.git
git clone git://git.linaro.org/uefi/uefi-tools.git

编译UEFI

export AARCH64_TOOLCHAIN=GCC49
export EDK2_DIR=${PWD}/linaro-edk2
export UEFI_TOOLS_DIR=${PWD}/uefi-tools

cd ${EDK2_DIR}
${UEFI_TOOLS_DIR}/uefi-build.sh -c ../LinaroPkg/platforms.config -b RELEASE -a ../arm-trusted-firmware hikey

cd ../l-loader
ln -s ${EDK2_DIR}/Build/HiKey/RELEASE_GCC49/FV/bl1.bin
ln -s ${EDK2_DIR}/Build/HiKey/RELEASE_GCC49/FV/fip.bin
arm-linux-gnueabihf-gcc -c -o start.o start.S
arm-linux-gnueabihf-gcc -c -o debug.o debug.S
arm-linux-gnueabihf-ld -Bstatic -Tl-loader.lds -Ttext 0xf9800800 start.o debug.o -o loader
arm-linux-gnueabihf-objcopy -O binary loader temp
python gen_loader.py -o l-loader.bin --img_loader=temp --img_bl1=bl1.bin
sudo PTABLE=aosp-8g bash -x generate_ptable.sh
python gen_loader.py -o ptable-aosp-8g.img --img_prm_ptable=prm_ptable.img

镜像输出(l-loader目录下)：

fip.bin l-loader.bin ptable-aosp-8g.img

烧写

sudo python hisi-idt.py --img1=l-loader.bin -d /dev/ttyUSB0
sudo fastboot flash ptable ptable-aosp-8g.img
sudo fastboot flash fastboot fip.bin

注意:
这里编译的boot_fat.uefi.img要和上面编译的fip.bin一起烧写,否则无法启动

如果不想烧写上面编译的fip.bin的话则需要手动修改生成boot_fat.uefi.img：
手动打包过程如下(将你自己编译的内核,DT和RAMDISK替换进去下面下载的prebuild的boot_fat.uefi.img后就可以了):

wget http://builds.96boards.org/releases/reference-plat...
wget https://builds.96boards.org/snapshots/reference-pl... -O grubaa64.efi
mkdir boot-fat
dd if=/dev/zero of=boot-fat.uefi.img bs=512 count=131072
sudo mkfs.fat -n "BOOT IMG" boot-fat.uefi.img
sudo mount -o loop,rw,sync boot-fat.uefi.img boot-fat
sudo cp hi6220-hikey.dtb boot-fat/hi6220-hikey.dtb
sudo cp AndroidFastbootApp.efi boot-fat/fastboot.efi
sudo cp grubaa64.efi boot-fat/grubaa64.efi
sudo umount boot-fat
sudo mv boot-fat.uefi.img hikey-boot-linux-VERSION.uefi.img
rm -rf boot-fat

出错 fatal error: uuid/uuid.h: No such file or directory

解决

 sudo apt-get install uuid-dev

转载于:https://www.cnblogs.com/QUSIR/p/6337393.html