nrf51822 --- 微信移植 （官方例子移植到SDK10.0）

1.目的

      把官方的代码移植到sdk10.0版本

2.分析

    由于官方的版本过低，移植到高版本

3.平台：

协议栈版本：SDK10.0.0

编译软件：keil 5.12

硬件平台：nrf51822最小系统

例子：SDK 10.0.0\examples\ble_peripheral\ble_app_uart\pca10028\s110\arm4

4.步骤

   需要准备的资料，

    一个是微信官方代码，一个是nrfSDK

   微信下载地址：http://iot.weixin.qq.com/wiki/new/index.html?page=6-1  

    

首先，添加几个文件夹：

 

文件夹的内容分别实在微信的对应名字的文件copy出来的，把他们加到SDK 10.0.0\examples\ble_peripheral\ble_app_uart\pca10028\s110\arm4工程里面，并添加对应的路径

  文件夹对应的内容为：

在main.c里面添加

static  ble_wechat_t 									  m_ble_wechat;  //¶¨Òå΢ÐÅ·þÎñ
uint8_t	 															  m_addl_adv_manuf_data[BLE_GAP_ADDR_LEN];
#define	                                COMPANY_IDENTIFIER						0x0056

ble_evt_dispatch()函数变为如下：

/**@brief Function for dispatching a S110 SoftDevice event to all modules with a S110 SoftDevice 
 *        event handler.
 *
 * @details This function is called from the S110 SoftDevice event interrupt handler after a S110 
 *          SoftDevice event has been received.
 *
 * @param[in] p_ble_evt  S110 SoftDevice event.
 */static void ble_evt_dispatch(ble_evt_t * p_ble_evt)
{
    ble_conn_params_on_ble_evt(p_ble_evt);
    //ble_nus_on_ble_evt(&m_nus, p_ble_evt);
    on_ble_evt(p_ble_evt);
    ble_advertising_on_ble_evt(p_ble_evt);
    bsp_btn_ble_on_ble_evt(p_ble_evt);
    ble_wechat_on_ble_evt(&m_ble_wechat, p_ble_evt, m_mpbledemo2_handler);  //Ìí¼ÓÍþÐÅ·þÎñʼþ
	  m_mpbledemo2_handler->m_data_on_ble_evt_func(&m_ble_wechat,p_ble_evt);  //
}

services_init()函数变为：

/**@brief Function for initializing services that will be used by the application.
 */
static void services_init(void)
{
    uint32_t       err_code;
//    ble_nus_init_t nus_init;
//    
//    memset(&nus_init, 0, sizeof(nus_init));

//    nus_init.data_handler = nus_data_handler;
//    
//    err_code = ble_nus_init(&m_nus, &nus_init);
//    APP_ERROR_CHECK(err_code);	


		err_code = ble_wechat_add_service(&m_ble_wechat);
		APP_ERROR_CHECK(err_code);
		err_code = ble_wechat_add_characteristics(&m_ble_wechat);
		APP_ERROR_CHECK(err_code);
}

advertising_init()函数变为:

**@brief Function for initializing the Advertising functionality.
 */
static void advertising_init(void)
{
    uint32_t      err_code;
    ble_advdata_t advdata;
    //ble_advdata_t scanrsp;
	
//   uint32_t      err_code;
    //ble_advdata_t advdata;
		/**< LE General Discoverable Mode, BR/EDR not supported. */
    uint8_t       flags = BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE;

    ble_uuid_t adv_uuids[] =
    {
        {BLE_UUID_WECHAT_SERVICE,         BLE_UUID_TYPE_BLE}
    };
		memset(&advdata, 0, sizeof(advdata));
		
    advdata.name_type               = BLE_ADVDATA_FULL_NAME;
    advdata.include_appearance      = false;    
    advdata.flags                     = flags;
    advdata.uuids_complete.uuid_cnt = sizeof(adv_uuids) / sizeof(adv_uuids[0]);
    advdata.uuids_complete.p_uuids  = adv_uuids;		
		
		ble_advdata_manuf_data_t        manuf_data;
    manuf_data.company_identifier = COMPANY_IDENTIFIER;
    manuf_data.data.size          = sizeof(m_addl_adv_manuf_data);
    manuf_data.data.p_data        = m_addl_adv_manuf_data;
    advdata.p_manuf_specific_data = &manuf_data;
		
    err_code = ble_advdata_set(&advdata, NULL);
    APP_ERROR_CHECK(err_code);
		    // Initialize advertising parameters (used when starting advertising)
    //memset(&m_adv_params, 0, sizeof(m_adv_params));


    // Build and set advertising data
    // Build advertising data struct to pass into @ref ble_advertising_init.
//    memset(&advdata, 0, sizeof(advdata));
//    advdata.name_type          = BLE_ADVDATA_FULL_NAME;
//    advdata.include_appearance = false;
//    advdata.flags              = BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE;
//    memset(&scanrsp, 0, sizeof(scanrsp));
//    scanrsp.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]);
//    scanrsp.uuids_complete.p_uuids  = m_adv_uuids;

    ble_adv_modes_config_t options = {0};
    options.ble_adv_fast_enabled  = BLE_ADV_SLOW_ENABLED;
    options.ble_adv_fast_interval = APP_ADV_INTERVAL;
    options.ble_adv_fast_timeout  = APP_ADV_TIMEOUT_IN_SECONDS;

    err_code = ble_advertising_init(&advdata, NULL, &options, on_adv_evt, NULL);
    APP_ERROR_CHECK(err_code);
}

添加如下代码：

/****************************************************************************
?    ?: get_mac_addr()
?    ?: »ñµÃÀ¶ÑÀµÄmacµØÖ·
????: void
????: ?
****************************************************************************/
void get_mac_addr(uint8_t *p_mac_addr)
{
		uint32_t error_code;
		ble_gap_addr_t *p_mac_addr_t = (ble_gap_addr_t*)malloc(sizeof(ble_gap_addr_t));
		error_code = sd_ble_gap_address_get(p_mac_addr_t);
		APP_ERROR_CHECK(error_code);
#ifdef CATCH_LOG
		printf("\r\n error:%d",error_code);
		printf("\r\n get mac addr");
#endif
		uint8_t *d = p_mac_addr_t->addr;		for ( uint8_t i = 6; i >0;)
	{	
		i--;
		p_mac_addr[5-i]= d[i];
		#ifdef CATCH_LOG
		printf ( ":%02x", d[i]);
		#endif
	}
	#ifdef CATCH_LOG
		putchar ( '\n' );
	#endif
	free(p_mac_addr_t);
	p_mac_addr_t = NULL;
}

/****************************************************************************
?    ?: data_handler_init()
?    ?: »Øµ÷º¯Êý
????: void
????: ?
****************************************************************************/
void	data_handler_init(data_handler** p_data_handler, uint8_t product_type)
{
	if (*p_data_handler == NULL) 
		{
			*p_data_handler = get_handler_by_type(product_type);
		}
}

/****************************************************************************
?    ?: register_all_products()
?    ?: ×¢²á»Øµ÷º¯Êý
????: void
????: ?
****************************************************************************/
//function for register all products
 void register_all_products(void) {
		REGISTER(mpbledemo2);
}

主函数如下:

/**@brief Application main function.
 */
int main(void)
{
    uint32_t err_code;
    bool erase_bonds;
    uint8_t  start_string[] = START_STRING;
    
    // Initialize.
    APP_TIMER_INIT(APP_TIMER_PRESCALER, APP_TIMER_OP_QUEUE_SIZE, false);
    uart_init();
    buttons_leds_init(&erase_bonds);
    ble_stack_init();
	//微信处理	
	  get_mac_addr(m_addl_adv_manuf_data);
    register_all_products();
	  data_handler_init(&m_mpbledemo2_handler,	PRODUCT_TYPE_MPBLEDEMO2);
	
    gap_params_init();
    services_init();
    advertising_init();
    conn_params_init();
    
    printf("%s",start_string);
	//
	
    err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
    APP_ERROR_CHECK(err_code);

    // Enter main loop.
    for (;;)
    {
        power_manage();
			  m_mpbledemo2_handler->m_data_main_process_func(&m_ble_wechat);
    }
}

OK，移植完毕。。编译如下。。。有重复定义的宏。

打开#include "ble_wechat_service.h"文件，屏蔽

OK。。。待测试。