华为交换机重置

1、硬件

华为s2700交换机、console线

2、连接软件

secureCrt/mobaxterm

右击计算机——管理——设备管理器——端口

此处以mobaxterm为例连接

 

 选择连接

3、初始化设备

<Quidway>

reset saved-configuration

The action will delete the saved configuration in the device. The configuration will be erased to reconfigure. Continue? [Y/N]:

y

Warning: Now clearing the configuration in the device.

Jan  1 2008 11:13:02-05:13 Quidway %%01CFM/4/RST_CFG(l)[1]:The user chose Y when deciding whether to reset the saved configuration. Info: Succeeded in clearing the configuration in the device.

<Quidway>reboot Info: The system is now comparing the configuration, please wait.

Warning: All the configuration will be saved to the configuration file for the next startup:, Continue?[Y/N]:

n

System will reboot! Continue?[Y/N]:  

y

Jan  1 2008 11:13:43-05:13 Quidway %%01CMD/4/REBOOT(l)[2]:The user chose Y when deciding whether to reboot the system. Info: system is rebooting ,please wait...

Jan  1 2008 11:13:43-05:13 Quidway %%01SRM/4/MSTRSCURST(l)[3]:Master SCU is reset. Jan  1 2008 11:13:43-05:13 Quidway %%01SRM/4/ResetReason(l)[4]: Board reset by VRP command or net manager . System reboot at 11:13:44 BIOS LOADING ... Copyright (c) 2008-2011 HUAWEI TECH CO., LTD. (Ver149, Mar 15 2013, 11:02:25)

Press Ctrl+B to enter BOOTROM menu ... 0 Auto-booting... Decompressing Image file ... done There is no record in region Exception.

PPI DEV SysInit..................OK

Hard system init.................OK

Begin to start the system, please waiting ......

VOS VFS init.....................OK

Startup File Check...............OK

VOS monitor init.................OK

CFM init advance.................OK

PAT init ........................OK

VOS VFS init hind ...............OK

VRP_Root begin...

VRP_InitializeTask begin...

Init the Device Link.............OK

CFG_PlaneInit begin..............OK

CFM_Init begin...................OK

CLI_CmdInit begin................OK

VRP_RegestAllLINKCmd begin.......

OK create task begin................

task init begin...

Recover configuration...OK!

Press ENTER to get started.------初始化完成

4、设置密码

Please configure the login password (6-16)
Enter Password:------设置密码
Confirm Password:------确认密码
<Quidway>------成功设置密码，进入系统视图