产品标题: 系列全DS200PTBAG1B工控备件燃机卡模块
型号:DS200PTBAG1B
品牌:GE
产品详情资料:
远程错误-处理远程命令时出错。次要错误代码标识错误。2(02h)请求读取的字节数大于输入缓冲区大小或请求写入的字节数为零或大于250字节。3(03h)COMMREQ数据块长度太小。字符串数据缺失或不完整。4(04h)等待串行接收数据的接收超时6(06h)***的CPU内存类型无效。7(07h)***的CPU内存偏移量无效。8(08h)无法访问CPU内存。12(0Ch)COMMREQ数据块长度太小。16(10h)操作系统服务错误。用于执行请求的操作系统服务返回了错误。17(11h)端口设备错误。用于执行服务的端口设备检测到错误。接收到中断或发生UART错误(奇偶校验、成帧、超限)。18(12h)请求已取消。请求在完成之前被终止。48(30h)串行输出超时。串行端口无法传输字符串。(可能是由于串行端口配置为使用硬件流控制时缺少CTS信号。)14(0Eh)自动拨号错误-尝试向连接的外部调制解调器发送命令字符串时出错。次要错误代码标识特定错误
产品英文详情料:
Remote error — Error processing a remote command. The minor error code identifies the error. 2 (02h) Number of bytes requested to read is greater than input buffer size OR number bytes requested to write is zero or greater than 250 bytes. 3 (03h) COMMREQ data block length is too small. String data is missing or incomplete. 4 (04h) Receive timeout awaiting serial reception of data 6 (06h) Invalid CPU memory type specified. 7 (07h) Invalid CPU memory offset specified. 8 (08h) Unable to access CPU memory. 12 (0Ch) COMMREQ data block length too small. 16 (10h) Operating system service error. The operating system service used to perform the request has returned an error. 17 (11h) Port device error. The port device used to perform the service has detected an error. Either a break was received or a UART Error (parity, framing, overrun) occurred. 18 (12h) Request cancelled. The request was terminated before it could complete. 48 (30h) Serial output timeout. The serial port was unable to transmit the string. (Could be due to missing CTS signal when the serial port is configured to use hardware flow control.) 14 (0Eh) Autodial Error — An error occurred while attempting to send a command string to an attached external modem. The minor error code identifies the specific error