DS200SLCCG3A燃机卡工控卡件PLC/DCS备件系统

                                                     产品详情资料：

DS200FPSAG1abb是一个风扇总成的电源板。它***初由通用电气公司制造和销售,作为马克V燃气/汽轮机控制系统的一部分。该系统采用三模块冗余(TMR)设计,具有高可靠性和低停机时间,设计的目的是使操作员能够即时访问重要的控制功能。MKV包括在线维护平台、内置诊断和直接传感器接口。虽然DS200FPSAB已***由通用电气公司制造,但它可以通过斧头控制作为翻新设备,我们的内部技术人员已经测试过,或者作为新的,从未使用过的清算库存。 

在每个边缘都有小的凹痕。每一个角角都已钻过,以允许安装硬件添加到单元中;这可能包括对峙或螺丝安装。该板有多个连接器,包括两个匹配N锁连接器和一个双针垂直头连接器。   

DS200FPSAG1abb上的其他板上元件包括保护元件,例如安装在保险丝架上的保险丝和几个散热器。板上有一个Tp测试点和一个跳线开关。板上有四个晶体管。电阻在金属膜、碳复合材料和金属丝上有所不同. 电容器包括小型陶瓷和电解电容器,三个大型表面安装的电解电容器放在左下角。大多数组件都标有参考编号或其原始制造编号。 

                                                 产品英文详情料:

The DS200FPSAG1abb is a power board for a fan assembly. It was initially manufactured and sold by General Electric Company as part of the Mark V gas/turbine control system. The system adopts three module redundancy (TMR) design, which has high reliability and low downtime. The purpose of the design is to enable operators to access important control functions in real time. MKV includes an online maintenance platform, built-in diagnostics, and direct sensor interfaces. Although the DS200FPSAB has been manufactured by General Electric Company, it can be used as a refurbishment device through axe control, which has been tested by our internal technical personnel or as a new, unused inventory clearing.

There are small dents on each edge. Each corner has been drilled to allow installation hardware to be added to the unit; This may include confrontation or screw installation. The board has multiple connectors, including two matching N-lock connectors and a dual pin vertical head connector.

The other on-board components on DS200FPSAG1abb include protective components, such as fuses installed on fuse racks and several heat sinks. There is a Tp Test point and a jumper switch on the board. There are four transistors on the board. Resistance varies on metal films, carbon composites, and metal wires The capacitor consists of small ceramic and Electrolytic capacitor, and three large surface mounted Electrolytic capacitor are placed in the lower left corner. Most components are labeled with a reference number or their original manufacturing number.