DS200TBQBG1A工控卡件PLC/DCS备件系统

产品标题：DS200TBQBG1A工控卡件PLC/DCS备件系统

型号：DS200TBQBG1A

品牌：GE

                                                             产品详情资料：

如果继电器的连接、矢量组匹配和变压比校正正确，则以下内容适用于每相：-相电流相同高-差电流为0%-高压和低压侧相电流的相位差为0°-同侧相电流之间的相位差是120°。

DS200CTBDG1A 是 Mark V GE DS200 控制板，用作涡轮机控制系统的一部分。 Mark V 是通用电气后来发布的 Speedtronic 涡轮机控制管理系统之一。它是一个集成的保护/监测/控制系统，专为蒸汽或燃气轮机的机械和发电机应用而设计。MKV 也可用于工厂控制的平衡。

DS200CTBDG1A 用作 Mark V 系统中的终端板。该板通常安装在系统的 C 内核中，位于通用数据处理器中。该板通过 RS-232 9 针 d-shell 有线连接和 IONet 以太网针连接器使用 IONet（以太网）上的通信链路与更大系统中的其他点和板进行通信。

DS200CTBDG1A 是一种静电敏感元件。建议处理此板的任何人都使用防静电腕带，以防止可能导致组件损坏或可能的静电电击的静电积聚。只有熟悉 Mark V 设备且训练有素的人员才能安装或维护该设备。有关正确处理的详细信息、维护计划以及有关可能的电路板危险的信息，请参阅通用电气最初随您的 OEM 购买提供的文档，例如手册或用户指南。

                                                              产品英文详情资料：

If the connection, vector group matching and the transformation ratio corrections of the relay are correct the following applies to each phase: - the phase currents are equally high - the differential currents are 0% - the phase differences of the HV and LV side phase currents are 0° - the phase differences between the phase currents on the same side are 120°.

DS200CTBDG1A is a Mark V GE DS200 control board used as part of the turbine control system. Mark V was one of the Speedtronic turbine control management systems later released by General Electric. It is an integrated protection/monitoring/control system designed specifically for mechanical and generator applications in steam or gas turbines. MKV can also be used for balancing factory control.

DS200CTBDG1A is used as a terminal board in the Mark V system. This board is usually installed in the C core of the system, located in the general-purpose data processor. This board communicates with other points and boards in a larger system using the communication link on IONet (Ethernet) through RS-232 9-pin d-shell wired connection and IONet Ethernet pin connector.

DS200CTBDG1A is an electrostatic sensitive component. It is recommended that anyone handling this board use an anti-static wrist strap to prevent the accumulation of static electricity that may cause component damage or potential electrostatic shock. Only well-trained personnel who are familiar with the Mark V equipment can install or maintain it. For detailed information on proper handling, maintenance plans, and information on potential circuit board hazards, please refer to the documentation originally provided by General Electric with your OEM purchase, such as manuals or user guides.