数码通讯终端板 DS200DTBAG1AAA 数字触点端板

数码通讯终端板 DS200DTBAG1AAA 数字触点端板

　　二、功能特点

　　1、5.1英寸240x128点阵图形液晶显示屏，led背光、画面丰富，信息量大；

　　2、采用基于arm的速、性能微处理器，可以同时实现8路信号的检测、记录、显示和报警；

　　3、采用大容量flash闪存芯片存储历史数据，超常时间数据存储，掉电丢失数据；

　　4、全隔离输入，可输入多种信号，无需更换硬件，通过仪表组态即可；

　　5、工程量显示数值范围宽，累积值可达4294967295；

　　6、中文菜单组态、显示通道号、工程单位、流量累积、温压补偿，软件密码锁保护用户组态安全；

　　7、 报警显示，同时指示各路通道的下下限、下限、上限、上上限报警；

　　8、显示精度：数字、曲线及棒图显示基本误差为±0.5%fs；

　　9、数据转存，使用usb接口存储体备份或转存历史数据；

　　10、标准串行通讯接口：rs485或和rs232；

　　11、可外接微型打印机，满足用户现场打印的需要；

　　12、金属外壳，允许在恶劣的环境下使用。

　　product introduction:

　　model: ds200dtbag1aaa adopts 32-bit processor based on arm core to realize high-speed information acquisition and processing, and 32m high-capacity flash memory chip can realize ultra long-time data storage. it can input standard current, standard voltage, thermocouple, thermal resistance and other signals. it has the functions of sensor isolation and distribution, relay output, temperature and voltage compensation, historical data transfer and remote communication.

　　2、 functional features

　　1. 5.1-inch 240x128 dot matrix graphic lcd with led backlight, rich pictures and large amount of information;

　　2. the speed and performance microprocessor based on arm can detect, record, display and alarm 8-channel signals at the same time;

　　3. large capacity flash memory chip is used to store historical data and data in extraordinary time. data will never be lost after power failure;

　　4. fully isolated universal input, which can input a variety of signals without replacing the hardware, and can be configured through the instrument;

　　5. the display range of quantities is wide, and the cumulative value can reach 4294967295;

　　6. chinese menu configuration, display channel number, engineering unit, flow accumulation, temperature and pressure compensation, and software password lock to protect the security of user configuration;

　　7. alarm display, indicating the lower limit, lower limit, upper limit and upper limit alarm of each channel at the same time;

　　8. display accuracy: the basic error of digital, curve and bar chart display is ± 0.5% fs;

　　9. data transfer, using usb interface memory to back up or transfer historical data;

　　10. standard serial communication interface: rs485 or rs232;

　　11. external micro printer can be connected to meet the needs of users' on-site printing;

　　12. metal shell, allowing use in harsh environments.