在Ubuntu为Apache2配置多个https端口

添加普通的端口可以参考https://blog.csdn.net/Joker_York/article/details/107536551

下面讲解一下添加https端口。

1、修改ports.conf文件

vim /etc/apache2/ports.conf

# If you just change the port or add more ports here, you will likely also

# have to change the VirtualHost statement in

# /etc/apache2/sites-enabled/000-default.conf



Listen 80



<IfModule ssl_module>

        Listen 8081                # 添加对端口的监听

        Listen 443

</IfModule>



<IfModule mod_gnutls.c>

        Listen 8081                  # 添加对端口的监听

        Listen 443

</IfModule>



# vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2、添加web-ssl.conf文件

cd /etc/apache2/sites-available
cp default-ssl.conf web-ssl.conf	# web-ssl.conf是新建的网站配置文件，名字自起
vim web-ssl.conf

<IfModule mod_ssl.c>
<VirtualHost _default_:8081>  #自定义的端口号
ServerAdmin webmaster@localhost


DocumentRoot /var/www/html     # 访问的路径


# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the loglevel for particular
# modules, e.g.
#LogLevel info ssl:warn


ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined


# For most configuration files from conf-available/, which are
# enabled or disabled at a global level, it is possible to
# include a line for only one particular virtual host. For example the
# following line enables the CGI configuration for this host only
# after it has been globally disabled with "a2disconf".
#Include conf-available/serve-cgi-bin.conf


#   SSL Engine Switch:
#   Enable/Disable SSL for this virtual host.
SSLEngine on


#   A self-signed (snakeoil) certificate can be created by installing
#   the ssl-cert package. See
#   /usr/share/doc/apache2/README.Debian.gz for more info.
#   If both key and certificate are stored in the same file, only the
#   SSLCertificateFile directive is needed.
# 自己申请的ssl证书
SSLCertificateFile  /etc/ssl/certs/ssl-cert-snakeoil.pem
SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key


#   Server Certificate Chain:
#   Point SSLCertificateChainFile at a file containing the
#   concatenation of PEM encoded CA certificates which form the
#   certificate chain for the server certificate. Alternatively
#   the referenced file can be the same as SSLCertificateFile
#   when the CA certificates are directly appended to the server
#   certificate for convinience.
#SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt


#   Certificate Authority (CA):
#   Set the CA certificate verification path where to find CA
#   certificates for client authentication or alternatively one
#   huge file containing all of them (file must be PEM encoded)
#   Note: Inside SSLCACertificatePath you need hash symlinks
#  to point to the certificate files. Use the provided
#  Makefile to update the hash symlinks after changes.
#SSLCACertificatePath /etc/ssl/certs/
#SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt


#   Certificate Revocation Lists (CRL):
#   Set the CA revocation path where to find CA CRLs for client
#   authentication or alternatively one huge file containing all
#   of them (file must be PEM encoded)
#   Note: Inside SSLCARevocationPath you need hash symlinks
#  to point to the certificate files. Use the provided
#  Makefile to update the hash symlinks after changes.
#SSLCARevocationPath /etc/apache2/ssl.crl/
#SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl


#   Client Authentication (Type):
#   Client certificate verification type and depth.  Types are
#   none, optional, require and optional_no_ca.  Depth is a
#   number which specifies how deeply to verify the certificate
#   issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth  10


#   SSL Engine Options:
#   Set various options for the SSL engine.
#   o FakeBasicAuth:
#  Translate the client X.509 into a Basic Authorisation.  This means that
#  the standard Auth/DBMAuth methods can be used for access control.  The
#  user name is the `one line' version of the client's X.509 certificate.
#  Note that no password is obtained from the user. Every entry in the user
#  file needs this password: `xxj31ZMTZzkVA'.
#   o ExportCertData:
#  This exports two additional environment variables: SSL_CLIENT_CERT and
#  SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
#  server (always existing) and the client (only existing when client
#  authentication is used). This can be used to import the certificates
#  into CGI scripts.
#   o StdEnvVars:
#  This exports the standard SSL/TLS related `SSL_*' environment variables.
#  Per default this exportation is switched off for performance reasons,
#  because the extraction step is an expensive operation and is usually
#  useless for serving static content. So one usually enables the
#  exportation for CGI and SSI requests only.
#   o OptRenegotiate:
#  This enables optimized SSL connection renegotiation handling when SSL
#  directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory /usr/lib/cgi-bin>
SSLOptions +StdEnvVars
</Directory>


#   SSL Protocol Adjustments:
#   The safe and default but still SSL/TLS standard compliant shutdown
#   approach is that mod_ssl sends the close notify alert but doesn't wait for
#   the close notify alert from client. When you need a different shutdown
#   approach you can use one of the following variables:
#   o ssl-unclean-shutdown:
#  This forces an unclean shutdown when the connection is closed, i.e. no
#  SSL close notify alert is send or allowed to received.  This violates
#  the SSL/TLS standard but is needed for some brain-dead browsers. Use
#  this when you receive I/O errors because of the standard approach where
#  mod_ssl sends the close notify alert.
#   o ssl-accurate-shutdown:
#  This forces an accurate shutdown when the connection is closed, i.e. a
#  SSL close notify alert is send and mod_ssl waits for the close notify
#  alert of the client. This is 100% SSL/TLS standard compliant, but in
#  practice often causes hanging connections with brain-dead browsers. Use
#  this only for browsers where you know that their SSL implementation
#  works correctly.
#   Notice: Most problems of broken clients are also related to the HTTP
#   keep-alive facility, so you usually additionally want to disable
#   keep-alive for those clients, too. Use variable "nokeepalive" for this.
#   Similarly, one has to force some clients to use HTTP/1.0 to workaround
#   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
#   "force-response-1.0" for this.
# BrowserMatch "MSIE [2-6]" \
#  nokeepalive ssl-unclean-shutdown \
#  downgrade-1.0 force-response-1.0


</VirtualHost>
</IfModule>


# vim: syntax=apache ts=4 sw=4 sts=4 sr noet

3、使用a2ensite和a2dissite来快速切换站点

sudo a2ensite web-ssl.conf

执行这步之后，apache2会在sites-enabled文件夹下创建同名文件链接，这样重启apache2后就会配置成功。
如果需要去掉某个网站端口的配置只需要执行
 

sudo a2dissite web-ssl.conf

这个命令就是将sites-enabled文件夹下的链接删掉。

4、修改运行目录，解决"You don't have permission to access..."错误

如果在上一步骤中设置的路径没有设置权限，那么访问网站的时候就会提示

修改"apache2.conf"配置文件
添加Directory块
 

<Directory /srv/> #你的路径
    Options Indexes FollowSymLinks
    AllowOverride None
    Require all granted
</Directory>

5、重启apache2服务

sudo service apache2 restart

访问方式https://www.xxxxx.com:8081