Windows下使用命令行设置IP

最新推荐文章于 2024-07-13 12:27:02 发布

anyisoft

最新推荐文章于 2024-07-13 12:27:02 发布

阅读量759

点赞数

文章标签： windows interface 脚本

本文链接：https://blog.csdn.net/anyisoft/article/details/7638300

版权

;设置为自动获取
netsh interface ip set address name="本地连接" source=dhcp
netsh interface ip set dns name="本地连接" source=dhcp

;设置为静态IP
netsh interface ip set address name="本地连接" source=static addr=xx.xx.xxx.xxx mask=255.255.255.0 gateway=xx.xx.xxx.xxx gwmetric=auto
;or gwmetric=0
netsh interface ip set dns name="本地连接" source=static addr=xx.xxx.x.x register=primary
;netsh interface ip add dns name="本地连接" addr=202.96.199.133 index=2

;netsh interface ip set wins name="本地连接" source=static addr=none

;脚本
@echo off
echo 正在配置IP,请稍等......
netsh interface ip set address name="本地连接" source=static addr=192.168.1.121 mask=255.255.255.0
echo 正在配置网关,请稍等......
netsh interface ip set address name="本地连接" gateway=192.168.1.254 gwmetric=0
echo 正在配置DNS,请稍等......
netsh interface ip set dns name="本地连接" source=static addr=192.168.1.254 register=primary
netsh interface ip add dns name="本地连接" addr=192.168.0.254 index=2
netsh interface ip set wins name="本地连接" source=static addr=none
echo 恭喜您! IP配置已经完成! -By Beachboy999

echo. & pause

动态获取IP 地址（DHCP）
netsh interface ip set address name="本地连接" source=dhcp

固定IP
netsh interface ip set address name="本地连接" source= static addr=192.168.1.121 mask=255.255.255.0 gateway=192.168.1.1 gwmetric=auto

自动获取DNS
netsh interface ip set dns name="本地连接" source=static

手动设置单个DNS
netsh interface ip set dns name="本地连接" source=static addr=192.168.1.1 register=primary

手动设置多个DNS
netsh interface ip add dns name="本地连接" addr=192.168.1.1 index=2