实验名称:isis基本配置
实验拓扑:
[R1]isis ?
INTEGER<1-65535> Process ID
vpn-instance VPN Routing/Forwarding Instance
<cr>
[R1]isis //开启isis功能,默认开启进程1
[R1-isis-1]network-entity ?
XX.XXXX. ... .XXXX.XX Network entity title (NET) //网络实体名称的格式
[R1-isis-1]network-entity 01.0000.0000.0001.00
[R1-isis-1]is-level ? //三种路由级别配置
level-1 Set the router to operate as a Level-1 (intra-area) router
level-1-2 Set the router to operate as both a Level-1 (intra-area) and
Level-2 (inter-area) router
level-2 Set the router to operate as a Level-2 (inter-area) router
[R1-isis-1]is-level level-1 //配置R1路由级别为level-1
[R1-isis-1]q
[R1]int lo0 //开启接口isis功能
[R1-LoopBack0]isis ?
circuit-level Set ISIS level for the interface 配置接口level等级
cost Set the interface cost for ISIS 配置isiscost值默认10
enable Enable ISIS processing 开启接口isis功能
ipv6 Configure IPv6 Commands for ISIS 开启接口ipv6的isis功能
[R1-LoopBack0]isis enable ?
INTEGER<1-65535> Process ID to attach the interface to
<cr>
[R1-LoopBack0]isis enable 1
[R1]int s0/2/0
[R1-Serial0/2/0]isis enable 1
配置R2的isis
[R2]isis
本文通过一个实验详细介绍了H3C路由器上IS-IS协议的基础配置,包括开启isis功能、设置网络实体名称、配置路由级别、启用接口isis功能等。同时,展示了如何查看isis接口信息、路由表、IS-IS路由信息和链路状态数据库,帮助理解IS-IS协议的工作原理。
最低0.47元/天 解锁文章
1569

被折叠的 条评论
为什么被折叠?



