H3C ISIS重分布路由实验 和 ISIS多区域实验

ISIS

常用命令

dis isis peer查看邻居
dis ip routing-table	
dis isis lsdb 查看isis数据库
dis isis lsdb  verbose 

重分布路由实验

拓扑图

ip地址

设备名称	接口	IP地址	网关
PCA	–	192.168.0.1/24	192.168.0.254
PCB	–	192.168.2.1/24	192.168.2.254
RTA	G0/0	192.168.0.254/24	–
	S1/0	192.168.1.1/30	–
RTB	G0/0	192.168.2.254/24	–
	S1/0	192.168.1.2/30	–

30=252
255.255.255.252

24=0
255.255.255.0

配置命令

RTA

<H3C>sys
System View: return to User View with Ctrl+Z.
[H3C]hostname RTA
[RTA]int g0/0
[RTA-GigabitEthernet0/0]ip address 192.168.0.254 255.255.255.0
[RTA-GigabitEthernet0/0]no shutdown
[RTA-GigabitEthernet0/0]exit
[RTA]int s1/0
[RTA-Serial1/0]ip address 192.168.1.1 255.255.255.252
[RTA-Serial1/0]no shutdown
[RTA-Serial1/0]exit
[RTA]isis
[RTA-isis-1]network-entity 10.0000.0000.0001.00
[RTA-isis-1]is-level level-1
[RTA-isis-1]quit
[RTA]int s1/0
[RTA-Serial1/0] isis enable 1
[RTA-Serial1/0]quit
[RTA]int g0/0
[RTA-GigabitEthernet0/0]isis enable 1
[RTA-GigabitEthernet0/0]quit
[RTA]

RTB

<H3C>sys
System View: return to User View with Ctrl+Z.
[H3C]hostname RTB
[RTB]isis
[RTB-isis-1]network-entity 10.0000.0000.0002.00
[RTB-isis-1]is-level level-1
[RTB-isis-1]quit
    
[RTB]int s1/0
[RTB-Serial1/0]isis enable 1
[RTB-Serial1/0]quit
[RTB-Serial1/0]ip address 192.168.1.2 255.255.255.252
[RTB-Serial1/0]no shutdown
[RTB-Serial1/0]exit
[RTB]
[RTB]int g0/0
[RTB-GigabitEthernet0/0]isis enable 1
[RTB-GigabitEthernet0/0]quit
[RTB-GigabitEthernet0/0]ip address  192.168.2.254 255.255.255.0
[RTB-GigabitEthernet0/0]no shutdown
[RTB-GigabitEthernet0/0]exit

查看基本信息

rta

dis isis brief

rtb

dis isis brief

测试

pc3 ping pc4

 ping  192.168.2.1

ISIS多区域实验

拓扑图

rta是2
rtb是1

IP地址

设备名称	接口	IP地址	网关
PCA	–	172.16.0.1/24	172.16.0.254
PCB	–	192.168.2.1/24	192.168.2.254
RTA	G0/0	172.16.0.254	–
	G0/1	172.16.1.1/24	–
RTB	G0/0	172.16.2.1/24	–
RTC	G0/0	172.16.1.2/24	–
	G0/1	172.16.2.2/24	–
	S1/0	192.168.1.1/30	–
RTD	G0/0	192.168.2.254/24
	S1/0	192.168.1.2/30

配置命令

RTA

配置接口地址

<H3C>SYS
System View: return to User View with Ctrl+Z.
[H3C]hostname RTA
[RTA]int g0/0
[RTA-GigabitEthernet0/0]ip add 172.16.0.254 255.255.255.0
[RTA-GigabitEthernet0/0]no shutdown
[RTA-GigabitEthernet0/0]quit
[RTA]int g0/1
[RTA-GigabitEthernet0/1]ip add 172.16.1.1 255.255.255.0
[RTA-GigabitEthernet0/1]no shutdown
[RTA-GigabitEthernet0/1]quit
[RTA]

[RTA]isis
[RTA-isis-1]ne
[RTA-isis-1]network-entity 10.0000.0000.0001.00
[RTA-isis-1]is-level level-1
[RTA-isis-1]quit
[RTA]int g0/0
[RTA-GigabitEthernet0/0]isis enable 1
[RTA-GigabitEthernet0/0]quit
[RTA]int g0/1
[RTA-GigabitEthernet0/1]isis enable 1
[RTA-GigabitEthernet0/1]quit

修改链路值

[RTA]isis
[RTA-isis-1]cost-style wide
[RTA-isis-1]bandwidth-reference 1000
[RTA-isis-1]auto-cost enable
[RTA-isis-1]quit

查看ISIS路由表

[RTA]dis isis route

                         Route information for IS-IS(1)
                         ------------------------------

                         Level-1 IPv4 Forwarding Table
                         -----------------------------

 IPv4 Destination     IntCost    ExtCost ExitInterface   NextHop         Flags
-------------------------------------------------------------------------------
 0.0.0.0/0            10         NULL    GE0/1           172.16.1.2      R/-/-
 172.16.2.0/24        20         NULL    GE0/1           172.16.1.2      R/-/-
 172.16.1.0/24        10         NULL    GE0/1           Direct          D/L/-
 172.16.0.0/24        10         NULL    GE0/0           Direct          D/L/-
 192.168.1.0/30       156260     NULL    GE0/1           172.16.1.2      R/-/-

      Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down bit set
[RTA]

在RTA上，共产生了5条ISIS路由，其中3（路由的Flags为“R”）条被放入到全局IP路由表中，其中有一条缺省路由，其下一跳是172.16.1.2，出接口是GE_0/1。

查看路由表

[RTA]dis ip routing-table

Destinations : 19       Routes : 19

Destination/Mask   Proto   Pre Cost        NextHop         Interface
0.0.0<