# mount -t ntfs-3g /dev/sdb1 /mnt/202001-05_bcl/
$MFTMirr does not match $MFT (record 0).
Failed to mount '/dev/sdb1': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
百度原因:
在删除或者复制移动时,磁盘或者u盘等外接硬件设备,忽然掉落(断掉,接口松动),在次挂载磁盘时就会出现错误
硬盘分区的$MFT文件出现了问题, linux下用ntfsfix
修复、windows下用chkdsk
修复
ntfsfix: command not found… 需要安装ntfsprogs 工具
# ntfsfix /dev/sdb1
bash: ntfsfix: command not found...
#yum install ntfsprogs
修复 /dev/sdb1
# ntfsfix /dev/sdb1
Mounting volume... $MFTMirr does not match $MFT (record 0).
FAILED
Attempting to correct errors...
Processing $MFT and $MFTMirr...
Reading $MFT... OK
Reading $MFTMirr... OK
Comparing $MFTMirr to $MFT... FAILED
Correcting differences in $MFTMirr record 0...OK
Processing of $MFT and $MFTMirr completed successfully.
Setting required flags on partition... OK
Going to empty the journal ($LogFile)... OK
Checking the alternate boot sector... OK
NTFS volume version is 3.1.
NTFS partition /dev/sdb1 was processed successfully.
重新挂载
[root@master164 ~]# mount -t ntfs-3g /dev/sdb1 /mnt/202001-05_bcl/
[root@master164 ~]# lsblk