![]() | ![]() |
2013-5-5![]() ![]() ![]() ![]() |
|
![Device <wbr>Checks <wbr>for <wbr>ASM, <wbr>Failed <wbr>or <wbr>Path <wbr>... <wbr>is <wbr>an&nbs](https://i-blog.csdnimg.cn/blog_migrate/a4c26d1e5885305701be709a3d33442f.gif)
In this Document
Symptoms |
Cause |
Solution |
References |
This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process and therefore has not been subject to an independent technical review. |
Applies to:
Oracle Database - Enterprise Edition - Version 11.2.0.2 and laterInformation in this document applies to any platform.
Symptoms
Environment Summary: 2 node RAC - 112020 (asm) - AIX 6.1 - EMC - AIX native multipath
1) 11.2.0.2 Grid Infrastructure install shows device checks for ASM as failing.
Oracle Universal Installer (OUI) shows pre-requisite checks for ASM devices as failing, during Oracle Grid Infrastructure install:
----------------------------------------------------------------------------
Oracle Grid Infrastructure - Setting up Grid Infrastructure - Steps 14 of 17
(screen)
Perform Prerequisite Checks
Check=Device Checks for ASM
Status=Failed
----------------------------------------------------------------------------
2) The devices are properly configured and according to the steps outlined in Grid Install guide for this platform.
3) This issue is not AIX specific therefore could affect other platforms (Solaris, etc.)
4) If one ignores these errors/warnings, the install successfully completes.
.
Cause
This issue is tracked in Oracle bug:10052786 (unpublished) which will be fixed starting 11.2.0.3.0.
A new issue for 11.2.0.3 has been reported via non-published Bug:12876327. Also there, the install succeeds despite of these errors/messages. If a one-off or back port is not available for the requested Oracle Realease/Version and platform via the following link, then please request one via a Service Request (SR) with Oracle Support:
Solution
If the Oracle ASM device path is not specified in the format /dev/rdsk/cMtNdXsY or /dev/did/rdsk/dXsY or /dev/md/rawdg/rdsk/dX, then the following error displays during the Oracle ASM device validation
prerequisite check:
PRVF-5150: Path /dev/rdsk/link/raw11 is not a valid path on all nodes
Workaround: Specify the character device name rather than the symbolic link name.
References
BUG:11898045 - PRVF-5150 ON AIX AND 11.2.0.2.0 FOR SHARED STORAGE DEVICES