key.c

最新推荐文章于 2023-07-01 22:49:43 发布

banbenggang9818

最新推荐文章于 2023-07-01 22:49:43 发布

阅读量315

点赞数

原文链接：http://www.cnblogs.com/liuchengchuxiao/p/4169156.html

版权

/* *************************************************************
4*4 Key Scan
************************************************************* */

#include " def.h "
#include " option.h "
#include " 2440addr.h "
#include " 2440lib.h "
#include " 2440slib.h "

/* *****************************************************************************
    1X6 ¾ØÕó¼üÅÌ
Áù¸öÊäÈëÒý½Å£º    EINT8 -----( GPG0  )
                EINT11 -----( GPG3  )
                EINT13-----( GPG5  )
                EINT14-----( GPG6 )
                EINT15-----( GPG7 )
                EINT19-----( GPG11 )


***************************************************************************** */
U16 Key_Scan( void )
{
    Delay( 80 ) ;

     if(      (rGPGDAT&( 1<< 0)) == 0 )
         return 1 ;
     else if( (rGPGDAT&( 1<< 3)) == 0 )
         return 2;
     else if( (rGPGDAT&( 1<< 5)) == 0 )
         return 3 ;
     else if( (rGPGDAT&( 1<< 6)) == 0 )
         return 4 ;
     else if( (rGPGDAT&( 1<< 7)) == 0 )
         return 5 ;
     else if( (rGPGDAT&( 1<< 11)) == 0 )
         return 6 ;
     else
         return 0;

}

static void __irq Key_ISR( void)
{
    U8 key;
    U32 r;

    EnterCritical(&r);
     if(rINTPND==BIT_EINT8_23) {
        ClearPending(BIT_EINT8_23);
         if(rEINTPEND&( 1<< 8)) {
         // Uart_Printf("eint11\n");
            rEINTPEND |= 1<< 8;
        }
         if(rEINTPEND&( 1<< 11)) {
         // Uart_Printf("eint11\n");
            rEINTPEND |= 1<< 11;
        }
         if(rEINTPEND&( 1<< 13)) {
         // Uart_Printf("eint11\n");
            rEINTPEND |= 1<< 13;
        }
         if(rEINTPEND&( 1<< 14)) {
         // Uart_Printf("eint11\n");
            rEINTPEND |= 1<< 14;
        }
         if(rEINTPEND&( 1<< 15)) {
         // Uart_Printf("eint11\n");
            rEINTPEND |= 1<< 15;
        }
         if(rEINTPEND&( 1<< 19)) {
         //     Uart_Printf("eint19\n");
            rEINTPEND |= 1<< 19;
        }
    }

    key=Key_Scan();
     if( key == 0xff )
        Uart_Printf( " Interrupt occur... Key is released!\n ") ;
     else
        Uart_Printf( " Interrupt occur... K%d is pressed!\n ", key) ;

    ExitCritical(&r);
}

void KeyScan_Test( void)
{
    Uart_Printf( " \nKey Scan Test, press ESC key to exit !\n ");


    rGPGCON = rGPGCON & (~(( 3<< 22)|( 3<< 6)|( 3<< 0)|( 3<< 10)|( 3<< 12)|( 3<< 14))) |
                         (( 2<< 22)|( 2<< 6)|( 2<< 0)|( 2<< 10)|( 2<< 12)|( 2<< 14)) ;         // GPG11,3 set EINT

    rEXTINT1 &= ~( 7|( 7<< 0));
    rEXTINT1 |= ( 0|( 0<< 0));     // set eint8 falling edge int

    rEXTINT1 &= ~( 7<< 12);
    rEXTINT1 |= ( 0<< 12);     // set eint11 falling edge int

    rEXTINT1 &= ~( 7<< 20);
    rEXTINT1 |= ( 0<< 20);     // set eint13 falling edge int

    rEXTINT1 &= ~( 7<< 24);
    rEXTINT1 |= ( 0<< 24);     // set eint14 falling edge int

    rEXTINT1 &= ~( 7<< 28);
    rEXTINT1 |= ( 0<< 28);     // set eint15 falling edge int

    rEXTINT2 &= ~( 0xf<< 12);
    rEXTINT2 |= ( 0<< 12);     // set eint19 falling edge int


    rEINTPEND |= ( 1<< 8)|( 1<< 11)|( 1<< 13)|( 1<< 14)|( 1<< 15)|( 1<< 19);         // clear eint 11,19
    rEINTMASK &= ~(( 1<< 8)|( 1<< 11)|( 1<< 13)|( 1<< 14)|( 1<< 15)|( 1<< 19));     // enable eint11,19
    ClearPending(BIT_EINT0|BIT_EINT2|BIT_EINT8_23);
    pISR_EINT0 = pISR_EINT2 = pISR_EINT8_23 = (U32)Key_ISR;
    EnableIrq(BIT_EINT0|BIT_EINT2|BIT_EINT8_23);

      while( Uart_GetKey() != ESC_KEY ) ;
     DisableIrq(BIT_EINT0|BIT_EINT2|BIT_EINT8_23);
}

转载于:https://www.cnblogs.com/liuchengchuxiao/p/4169156.html