LinearLayout的测量过程

从LinearLayout的onMeasure()方法开始分析：（所用代码 API 23）

@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
    if (mOrientation == VERTICAL) {
        measureVertical(widthMeasureSpec, heightMeasureSpec);
    } else {
        measureHorizontal(widthMeasureSpec, heightMeasureSpec);
    }
}

LinearLayout分两个方向的测量， 看一个即可。 

这里选择竖直方向上的测量过程：

    /**
     * Measures the children when the orientation of this LinearLayout is set
     * to {@link #VERTICAL}.
     *
     * @param widthMeasureSpec Horizontal space requirements as imposed by the parent.
     * @param heightMeasureSpec Vertical space requirements as imposed by the parent.
     *
     * @see #getOrientation()
     * @see #setOrientation(int)
     * @see #onMeasure(int, int)
     */
    void measureVertical(int widthMeasureSpec, int heightMeasureSpec) {
        mTotalLength = 0;
        int maxWidth = 0;
        int childState = 0;
        int alternativeMaxWidth = 0;
        int weightedMaxWidth = 0;
        boolean allFillParent = true;
        float totalWeight = 0;

        final int count = getVirtualChildCount();
        
        final int widthMode = MeasureSpec.getMode(widthMeasureSpec);
        final int heightMode = MeasureSpec.getMode(heightMeasureSpec);

        boolean matchWidth = false;
        boolean skippedMeasure = false;

        final int baselineChildIndex = mBaselineAlignedChildIndex;        
        final boolean useLargestChild = mUseLargestChild;

        int largestChildHeight = Integer.MIN_VALUE;

        // See how tall everyone is. Also remember max width.
        for (int i = 0; i < count; ++i) {          //遍历子元素， 并对每个子元素执行measureChildBeforeLayout()方法
            final View child = getVirtualChildAt(i);

            if (child == null) {
                mTotalLength += measureNullChild(i);
                continue;
            }

            if (child.getVisibility() == View.GONE) {
               i += getChildrenSkipCount(child, i);
               continue;
            }

            if (hasDividerBeforeChildAt(i)) {
                mTotalLength += mDividerHeight;
            }

            LinearLayout.LayoutParams lp = (LinearLayout.LayoutParams) child.getLayoutParams();

            totalWeight += lp.weight;
            
            if (heightMode == MeasureSpec.EXACTLY && lp.height == 0 && lp.weight > 0) {
                // Optimization: don't bother measuring children who are going to use
                // leftover space. These views will get measured again down below if
                // there is any leftover space.
                final int totalLength = mTotalLength;
                mTotalLength = Math.max(totalLength, totalLength + lp.topMargin + lp.bottomMargin);
                skippedMeasure = true;
            } else {
                int oldHeight = Integer.MIN_VALUE;

                if (lp.height == 0 && lp.weight > 0) {
                    // heightMode is either UNSPECIFIED or AT_MOST, and this
                    // child wanted to stretch to fill available space.
                    // Translate that to WRAP_CONTENT so that it does not end up
                    // with a height of 0
                    oldHeight = 0;
                    lp.height = LayoutParams.WRAP_CONTENT;
                }

                // Determine how big this child would like to be. If this or
                // previous children have given a weight, then we allow it to
                // use all available space (and we will shrink things later
                // if needed).
                measureChildBeforeLayout(
                       child, i, widthMeasureSpec, 0, heightMeasureSpec,
                       totalWeight == 0 ? mTotalLength : 0);   //这个方法内部会去调用子元素的measure方法

                if (oldHeight != Integer.MIN_VALUE) {
                   lp.height = oldHeight;
                }

                final int childHeight = child.getMeasuredHeight();
                final int totalLength = mTotalLength;
                mTotalLength = Math.max(totalLength, totalLength + childHeight + lp.topMargin +
                       lp.bottomMargin + getNextLocationOffset(child));

                if (useLargestChild) {
                    largestChildHeight = Math.max(childHeight, largestChildHeight);
                }
            }

            /**
             * If applicable, compute the additional offset to the child's baseline
             * we'll need later when asked {@link #getBaseline}.
             */
            if ((baselineChildIndex >= 0) && (baselineChildIndex == i + 1)) {
               mBaselineChildTop = mTotalLength;
            }

            // if we are trying to use a child index for our baseline, the above
            // book keeping only works if there are no children above it with
            // weight.  fail fast to aid the developer.
            if (i < baselineChildIndex && lp.weight > 0) {
                throw new RuntimeException("A child of LinearLayout with index "
                        + "less than mBaselineAlignedChildIndex has weight > 0, which "
                        + "won't work.  Either remove the weight, or don't set "
                        + "mBaselineAlignedChildIndex.");
            }

            boolean matchWidthLocally = false;
            if (widthMode != MeasureSpec.EXACTLY && lp.width == LayoutParams.MATCH_PARENT) {
                // The width of the linear layout will scale, and at least one
                // child said it wanted to match our width. Set a flag
                // indicating that we need to remeasure at least that view when
                // we know our width.
                matchWidth = true;
                matchWidthLocally = true;
            }

            final int margin = lp.leftMargin + lp.rightMargin;
            final int measuredWidth = child.getMeasuredWidth() + margin;
            maxWidth = Math.max(maxWidth, measuredWidth);
            childState = combineMeasuredStates(childState, child.getMeasuredState());

            allFillParent = allFillParent && lp.width == LayoutParams.MATCH_PARENT;
            if (lp.weight > 0) {
                /*
                 * Widths of weighted Views are bogus if we end up
                 * remeasuring, so keep them separate.
                 */
                weightedMaxWidth = Math.max(weightedMaxWidth,
                        matchWidthLocally ? margin : measuredWidth);
            } else {
                alternativeMaxWidth = Math.max(alternativeMaxWidth,
                        matchWidthLocally ? margin : measuredWidth);
            }

            i += getChildrenSkipCount(child, i);
        }

        if (mTotalLength > 0 && hasDividerBeforeChildAt(count)) {
            mTotalLength += mDividerHeight;
        }

        if (useLargestChild &&
                (heightMode == MeasureSpec.AT_MOST || heightMode == MeasureSpec.UNSPECIFIED)) {
            mTotalLength = 0;

            for (int i = 0; i < count; ++i) {
                final View child = getVirtualChildAt(i);

                if (child == null) {
                    mTotalLength += measureNullChild(i);
                    continue;
                }

                if (child.getVisibility() == GONE) {
                    i += getChildrenSkipCount(child, i);
                    continue;
                }

                final LinearLayout.LayoutParams lp = (LinearLayout.LayoutParams)
                        child.getLayoutParams();
                // Account for negative margins
                final int totalLength = mTotalLength;
                mTotalLength = Math.max(totalLength, totalLength + largestChildHeight +
                        lp.topMargin + lp.bottomMargin + getNextLocationOffset(child));
            }
        }

        // Add in our padding
        mTotalLength += mPaddingTop + mPaddingBottom;

        int heightSize = mTotalLength;

        // Check against our minimum height
        heightSize = Math.max(heightSize, getSuggestedMinimumHeight());
        
        // Reconcile our calculated size with the heightMeasureSpec
        int heightSizeAndState = resolveSizeAndState(heightSize, heightMeasureSpec, 0);
        heightSize = heightSizeAndState & MEASURED_SIZE_MASK;
        
        // Either expand children with weight to take up available space or
        // shrink them if they extend beyond our current bounds. If we skipped
        // measurement on any children, we need to measure them now.
        int delta = heightSize - mTotalLength;
        if (skippedMeasure || delta != 0 && totalWeight > 0.0f) {
            float weightSum = mWeightSum > 0.0f ? mWeightSum : totalWeight;

            mTotalLength = 0;

            for (int i = 0; i < count; ++i) {
                final View child = getVirtualChildAt(i);
                
                if (child.getVisibility() == View.GONE) {
                    continue;
                }
                
                LinearLayout.LayoutParams lp = (LinearLayout.LayoutParams) child.getLayoutParams();
                
                float childExtra = lp.weight;
                if (childExtra > 0) {
                    // Child said it could absorb extra space -- give him his share
                    int share = (int) (childExtra * delta / weightSum);
                    weightSum -= childExtra;
                    delta -= share;

                    final int childWidthMeasureSpec = getChildMeasureSpec(widthMeasureSpec,
                            mPaddingLeft + mPaddingRight +
                                    lp.leftMargin + lp.rightMargin, lp.width);

                    // TODO: Use a field like lp.isMeasured to figure out if this
                    // child has been previously measured
                    if ((lp.height != 0) || (heightMode != MeasureSpec.EXACTLY)) {
                        // child was measured once already above...
                        // base new measurement on stored values
                        int childHeight = child.getMeasuredHeight() + share;
                        if (childHeight < 0) {
                            childHeight = 0;
                        }
                        
                        child.measure(childWidthMeasureSpec,
                                MeasureSpec.makeMeasureSpec(childHeight, MeasureSpec.EXACTLY));
                    } else {
                        // child was skipped in the loop above.
                        // Measure for this first time here      
                        child.measure(childWidthMeasureSpec,
                                MeasureSpec.makeMeasureSpec(share > 0 ? share : 0,
                                        MeasureSpec.EXACTLY));
                    }

                    // Child may now not fit in vertical dimension.
                    childState = combineMeasuredStates(childState, child.getMeasuredState()
                            & (MEASURED_STATE_MASK>>MEASURED_HEIGHT_STATE_SHIFT));
                }

                final int margin =  lp.leftMargin + lp.rightMargin;
                final int measuredWidth = child.getMeasuredWidth() + margin;
                maxWidth = Math.max(maxWidth, measuredWidth);

                boolean matchWidthLocally = widthMode != MeasureSpec.EXACTLY &&
                        lp.width == LayoutParams.MATCH_PARENT;

                alternativeMaxWidth = Math.max(alternativeMaxWidth,
                        matchWidthLocally ? margin : measuredWidth);

                allFillParent = allFillParent && lp.width == LayoutParams.MATCH_PARENT;

                final int totalLength = mTotalLength;
                mTotalLength = Math.max(totalLength, totalLength + child.getMeasuredHeight() +
                        lp.topMargin + lp.bottomMargin + getNextLocationOffset(child));
            }

            // Add in our padding
            mTotalLength += mPaddingTop + mPaddingBottom;
            // TODO: Should we recompute the heightSpec based on the new total length?
        } else {
            alternativeMaxWidth = Math.max(alternativeMaxWidth,
                                           weightedMaxWidth);


            // We have no limit, so make all weighted views as tall as the largest child.
            // Children will have already been measured once.
            if (useLargestChild && heightMode != MeasureSpec.EXACTLY) {
                for (int i = 0; i < count; i++) {
                    final View child = getVirtualChildAt(i);

                    if (child == null || child.getVisibility() == View.GONE) {
                        continue;
                    }

                    final LinearLayout.LayoutParams lp =
                            (LinearLayout.LayoutParams) child.getLayoutParams();

                    float childExtra = lp.weight;
                    if (childExtra > 0) {
                        child.measure(
                                MeasureSpec.makeMeasureSpec(child.getMeasuredWidth(),
                                        MeasureSpec.EXACTLY),
                                MeasureSpec.makeMeasureSpec(largestChildHeight,
                                        MeasureSpec.EXACTLY));
                    }
                }
            }
        }

        if (!allFillParent && widthMode != MeasureSpec.EXACTLY) {
            maxWidth = alternativeMaxWidth;
        }
        
        maxWidth += mPaddingLeft + mPaddingRight;

        // Check against our minimum width
        maxWidth = Math.max(maxWidth, getSuggestedMinimumWidth());
        
        setMeasuredDimension(resolveSizeAndState(maxWidth, widthMeasureSpec, childState),
                heightSizeAndState);

        if (matchWidth) {
            forceUniformWidth(count, heightMeasureSpec);
        }
    }

从 上面这段代码可以看出，系统会遍历子元素并对每个子元素执行 measureChildBeforeLayout 方法，这个方法内部会调用子元素的 measure 方法，这样各个子元素就开始依次进入 measure 过程，并且系统会通过 mTotalLength 这个变量来存储 LinearLayout 在竖直方向的初始高度。每测量一个子元素，mTotalLength 就会增加，增加的部分主要包括了子元素的高度以及子元素在竖直方向上的 margin 等。

等子元素测量完毕后，LinearLayout 会测量自己的大小，源码如下：

   public static int resolveSizeAndState(int size, int measureSpec, int childMeasuredState) {
        final int specMode = MeasureSpec.getMode(measureSpec);
        final int specSize = MeasureSpec.getSize(measureSpec);
        final int result;
        switch (specMode) {
            case MeasureSpec.AT_MOST:
                if (specSize < size) {
                    result = specSize | MEASURED_STATE_TOO_SMALL;
                } else {
                    result = size;
                }
                break;
            case MeasureSpec.EXACTLY:
                result = specSize;
                break;
            case MeasureSpec.UNSPECIFIED:
            default:
                result = size;
        }
        return result | (childMeasuredState & MEASURED_STATE_MASK);
    }

　　针对竖直的LinearLayout而言， 它在水平方向上的测量过程遵循View的测量过程。

在竖直方向上的测量过程则和View不同：

     如果LinearLayout的布局中高度是match_parent或者具体数值， 那么它的测量过程与View一致， 即高度为specSize;

      如果LinearLayout的布局中高度是wrap_content， 那么它的高度就是所有子元素所占用的高度总和， 但是仍然不能超过它的父容器的剩余空间，当然它的最终高度还需要考虑其在竖直方向的padding。

 

LinearLaout类中测量子类

    void measureChildBeforeLayout(View child, int childIndex,
            int widthMeasureSpec, int totalWidth, int heightMeasureSpec,
            int totalHeight) {
        measureChildWithMargins(child, widthMeasureSpec, totalWidth,
                heightMeasureSpec, totalHeight);
    }

　　实际上是调用父类ViewGroup的measureChildWithMargins()方法

    /**
     * Ask one of the children of this view to measure itself, taking into
     * account both the MeasureSpec requirements for this view and its padding
     * and margins. The child must have MarginLayoutParams The heavy lifting is
     * done in getChildMeasureSpec.
     *
     * @param child The child to measure
     * @param parentWidthMeasureSpec The width requirements for this view
     * @param widthUsed Extra space that has been used up by the parent
     *        horizontally (possibly by other children of the parent)
     * @param parentHeightMeasureSpec The height requirements for this view
     * @param heightUsed Extra space that has been used up by the parent
     *        vertically (possibly by other children of the parent)
     */
    protected void measureChildWithMargins(View child,
            int parentWidthMeasureSpec, int widthUsed,
            int parentHeightMeasureSpec, int heightUsed) {
        final MarginLayoutParams lp = (MarginLayoutParams) child.getLayoutParams();

        final int childWidthMeasureSpec = getChildMeasureSpec(parentWidthMeasureSpec,
                mPaddingLeft + mPaddingRight + lp.leftMargin + lp.rightMargin
                        + widthUsed, lp.width);
        final int childHeightMeasureSpec = getChildMeasureSpec(parentHeightMeasureSpec,
                mPaddingTop + mPaddingBottom + lp.topMargin + lp.bottomMargin
                        + heightUsed, lp.height);

        child.measure(childWidthMeasureSpec, childHeightMeasureSpec);
    }

具体测量规格的创建是通过 getChildMeasureSpec()方法

    public static int getChildMeasureSpec(int spec, int padding, int childDimension) {
        int specMode = MeasureSpec.getMode(spec);
        int specSize = MeasureSpec.getSize(spec);

        int size = Math.max(0, specSize - padding);

        int resultSize = 0;
        int resultMode = 0;

        switch (specMode) {
        // Parent has imposed an exact size on us
        case MeasureSpec.EXACTLY:
            if (childDimension >= 0) {
                resultSize = childDimension;
                resultMode = MeasureSpec.EXACTLY;
            } else if (childDimension == LayoutParams.MATCH_PARENT) {
                // Child wants to be our size. So be it.
                resultSize = size;
                resultMode = MeasureSpec.EXACTLY;
            } else if (childDimension == LayoutParams.WRAP_CONTENT) {
                // Child wants to determine its own size. It can't be
                // bigger than us.
                resultSize = size;
                resultMode = MeasureSpec.AT_MOST;
            }
            break;

        // Parent has imposed a maximum size on us
        case MeasureSpec.AT_MOST:
            if (childDimension >= 0) {
                // Child wants a specific size... so be it
                resultSize = childDimension;
                resultMode = MeasureSpec.EXACTLY;
            } else if (childDimension == LayoutParams.MATCH_PARENT) {
                // Child wants to be our size, but our size is not fixed.
                // Constrain child to not be bigger than us.
                resultSize = size;
                resultMode = MeasureSpec.AT_MOST;
            } else if (childDimension == LayoutParams.WRAP_CONTENT) {
                // Child wants to determine its own size. It can't be
                // bigger than us.
                resultSize = size;
                resultMode = MeasureSpec.AT_MOST;
            }
            break;

        // Parent asked to see how big we want to be
        case MeasureSpec.UNSPECIFIED:
            if (childDimension >= 0) {
                // Child wants a specific size... let him have it
                resultSize = childDimension;
                resultMode = MeasureSpec.EXACTLY;
            } else if (childDimension == LayoutParams.MATCH_PARENT) {
                // Child wants to be our size... find out how big it should
                // be
                resultSize = View.sUseZeroUnspecifiedMeasureSpec ? 0 : size;
                resultMode = MeasureSpec.UNSPECIFIED;
            } else if (childDimension == LayoutParams.WRAP_CONTENT) {
                // Child wants to determine its own size.... find out how
                // big it should be
                resultSize = View.sUseZeroUnspecifiedMeasureSpec ? 0 : size;
                resultMode = MeasureSpec.UNSPECIFIED;
            }
            break;
        }
        return MeasureSpec.makeMeasureSpec(resultSize, resultMode);
    }

对于DecorView, 其MeasureSpec由窗口和其自身的LaoyutParams来共同确定；

对于普通View，其MeasureSpec由父容器的MeasureSpec和自身的LayoutParams来共同决定。

 

说明：  此文章所有内容来自Android开发艺术探索， 复制过程中不保证与原文一致， 如有错漏，敬请谅解。

 

转载于:https://www.cnblogs.com/huyang011/p/7469707.html