//LinearLayout实现父类ViewGroup的OnMeasure过程@Override protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) { if (mOrientation == VERTICAL) { measureVertical(widthMeasureSpec, heightMeasureSpec); } else { measureHorizontal(widthMeasureSpec, heightMeasureSpec); } }// 参数widthMeasureSpec,heightMeasureSpec 是什么？
首先它是measure(int widthMeasureSpec, int heightMeasureSpec) 中传递过来的参数； 2.它是由 mode 和 size 组成; 这个值是如何确定的？ 下面是MeasureVertical方法： 可以看到widthMeasureSpec和heightMeasureSpec说明 是父布局传递过来的；void measureVertical(int widthMeasureSpec, int heightMeasureSpec)
{ mTotalLength = 0; int maxWidth = 0; int childState = 0; int alternativeMaxWidth = 0; int weightedMaxWidth = 0; boolean allFillParent = true; float totalWeight = 0; final int count = getVirtualChildCount(); final int widthMode = MeasureSpec.getMode(widthMeasureSpec); final int heightMode = MeasureSpec.getMode(heightMeasureSpec); boolean matchWidth = false; boolean skippedMeasure = false; final int baselineChildIndex = mBaselineAlignedChildIndex; final boolean useLargestChild = mUseLargestChild; int largestChildHeight = Integer.MIN_VALUE; // See how tall everyone is. Also remember max width.
//遍历所有的孩子
for (int i = 0; i < count; ++i) { final View child = getVirtualChildAt(i); if (child == null) { mTotalLength += measureNullChild(i); continue; } if (child.getVisibility() == View.GONE) { i += getChildrenSkipCount(child, i); continue; } if (hasDividerBeforeChildAt(i)) { mTotalLength += mDividerHeight; } LinearLayout.LayoutParams lp = (LinearLayout.LayoutParams) child.getLayoutParams(); totalWeight += lp.weight; if (heightMode == MeasureSpec.EXACTLY && lp.height == 0 && lp.weight > 0) { // Optimization: don't bother measuring children who are going to use // leftover space. These views will get measured again down below if // there is any leftover space.
//这个意思是用剩余空间的子view，不事先测量； 而是测量后有剩下的空间的情况下，再次测量； 下面是最大高度的记录；
final int totalLength = mTotalLength; mTotalLength = Math.max(totalLength, totalLength + lp.topMargin + lp.bottomMargin); skippedMeasure = true; } else { int oldHeight = Integer.MIN_VALUE; if (lp.height == 0 && lp.weight > 0) { // heightMode is either UNSPECIFIED or AT_MOST, and this // child wanted to stretch to fill available space. // Translate that to WRAP_CONTENT so that it does not end up // with a height of 0 oldHeight = 0; lp.height = LayoutParams.WRAP_CONTENT; } // Determine how big this child would like to be. If this or // previous children have given a weight, then we allow it to // use all available space (and we will shrink things later // if needed).
//这个是测量孩子的尺寸大小； 看一看这段代码实现，了解heightMeasureSpec；
measureChildBeforeLayout( child, i, widthMeasureSpec, 0, heightMeasureSpec, totalWeight == 0 ? mTotalLength : 0); if (oldHeight != Integer.MIN_VALUE) { lp.height = oldHeight; } final int childHeight = child.getMeasuredHeight(); final int totalLength = mTotalLength; mTotalLength = Math.max(totalLength, totalLength + childHeight + lp.topMargin + lp.bottomMargin + getNextLocationOffset(child)); if (useLargestChild) { largestChildHeight = Math.max(childHeight, largestChildHeight); } } /** * If applicable, compute the additional offset to the child's baseline * we'll need later when asked {@link #getBaseline}. */ if ((baselineChildIndex >= 0) && (baselineChildIndex == i + 1)) { mBaselineChildTop = mTotalLength; } // if we are trying to use a child index for our baseline, the above // book keeping only works if there are no children above it with // weight. fail fast to aid the developer. if (i < baselineChildIndex && lp.weight > 0) { throw new RuntimeException("A child of LinearLayout with index " + "less than mBaselineAlignedChildIndex has weight > 0, which " + "won't work. Either remove the weight, or don't set " + "mBaselineAlignedChildIndex."); } boolean matchWidthLocally = false; if (widthMode != MeasureSpec.EXACTLY && lp.width == LayoutParams.MATCH_PARENT) { // The width of the linear layout will scale, and at least one // child said it wanted to match our width. Set a flag // indicating that we need to remeasure at least that view when // we know our width. matchWidth = true; matchWidthLocally = true; } final int margin = lp.leftMargin + lp.rightMargin; final int measuredWidth = child.getMeasuredWidth() + margin; maxWidth = Math.max(maxWidth, measuredWidth); childState = combineMeasuredStates(childState, child.getMeasuredState()); allFillParent = allFillParent && lp.width == LayoutParams.MATCH_PARENT; if (lp.weight > 0) { /* * Widths of weighted Views are bogus if we end up * remeasuring, so keep them separate. */ weightedMaxWidth = Math.max(weightedMaxWidth, matchWidthLocally ? margin : measuredWidth); } else { alternativeMaxWidth = Math.max(alternativeMaxWidth, matchWidthLocally ? margin : measuredWidth); } i += getChildrenSkipCount(child, i); } if (mTotalLength > 0 && hasDividerBeforeChildAt(count)) { mTotalLength += mDividerHeight; } if (useLargestChild && (heightMode == MeasureSpec.AT_MOST || heightMode == MeasureSpec.UNSPECIFIED)) { mTotalLength = 0; for (int i = 0; i < count; ++i) { final View child = getVirtualChildAt(i); if (child == null) { mTotalLength += measureNullChild(i); continue; } if (child.getVisibility() == GONE) { i += getChildrenSkipCount(child, i); continue; } final LinearLayout.LayoutParams lp = (LinearLayout.LayoutParams) child.getLayoutParams(); // Account for negative margins final int totalLength = mTotalLength; mTotalLength = Math.max(totalLength, totalLength + largestChildHeight + lp.topMargin + lp.bottomMargin + getNextLocationOffset(child)); } } // Add in our padding mTotalLength += mPaddingTop + mPaddingBottom; int heightSize = mTotalLength; // Check against our minimum height heightSize = Math.max(heightSize, getSuggestedMinimumHeight()); // Reconcile our calculated size with the heightMeasureSpec int heightSizeAndState = resolveSizeAndState(heightSize, heightMeasureSpec, 0); heightSize = heightSizeAndState & MEASURED_SIZE_MASK; // Either expand children with weight to take up available space or // shrink them if they extend beyond our current bounds. If we skipped // measurement on any children, we need to measure them now. int delta = heightSize - mTotalLength; if (skippedMeasure || delta != 0 && totalWeight > 0.0f) { float weightSum = mWeightSum > 0.0f ? mWeightSum : totalWeight; mTotalLength = 0; for (int i = 0; i < count; ++i) { final View child = getVirtualChildAt(i); if (child.getVisibility() == View.GONE) { continue; } LinearLayout.LayoutParams lp = (LinearLayout.LayoutParams) child.getLayoutParams(); float childExtra = lp.weight; if (childExtra > 0) { // Child said it could absorb extra space -- give him his share int share = (int) (childExtra * delta / weightSum); weightSum -= childExtra; delta -= share; final int childWidthMeasureSpec = getChildMeasureSpec(widthMeasureSpec, mPaddingLeft + mPaddingRight + lp.leftMargin + lp.rightMargin, lp.width); // TODO: Use a field like lp.isMeasured to figure out if this // child has been previously measured if ((lp.height != 0) || (heightMode != MeasureSpec.EXACTLY)) { // child was measured once already above... // base new measurement on stored values int childHeight = child.getMeasuredHeight() + share; if (childHeight < 0) { childHeight = 0; } child.measure(childWidthMeasureSpec, MeasureSpec.makeMeasureSpec(childHeight, MeasureSpec.EXACTLY)); } else { // child was skipped in the loop above. // Measure for this first time here child.measure(childWidthMeasureSpec, MeasureSpec.makeMeasureSpec(share > 0 ? share : 0, MeasureSpec.EXACTLY)); } // Child may now not fit in vertical dimension. childState = combineMeasuredStates(childState, child.getMeasuredState() & (MEASURED_STATE_MASK>>MEASURED_HEIGHT_STATE_SHIFT)); } final int margin = lp.leftMargin + lp.rightMargin; final int measuredWidth = child.getMeasuredWidth() + margin; maxWidth = Math.max(maxWidth, measuredWidth); boolean matchWidthLocally = widthMode != MeasureSpec.EXACTLY && lp.width == LayoutParams.MATCH_PARENT; alternativeMaxWidth = Math.max(alternativeMaxWidth, matchWidthLocally ? margin : measuredWidth); allFillParent = allFillParent && lp.width == LayoutParams.MATCH_PARENT; final int totalLength = mTotalLength; mTotalLength = Math.max(totalLength, totalLength + child.getMeasuredHeight() + lp.topMargin + lp.bottomMargin + getNextLocationOffset(child)); } // Add in our padding mTotalLength += mPaddingTop + mPaddingBottom; // TODO: Should we recompute the heightSpec based on the new total length? } else { alternativeMaxWidth = Math.max(alternativeMaxWidth, weightedMaxWidth); // We have no limit, so make all weighted views as tall as the largest child. // Children will have already been measured once. if (useLargestChild && heightMode != MeasureSpec.EXACTLY) { for (int i = 0; i < count; i++) { final View child = getVirtualChildAt(i); if (child == null || child.getVisibility() == View.GONE) { continue; } final LinearLayout.LayoutParams lp = (LinearLayout.LayoutParams) child.getLayoutParams(); float childExtra = lp.weight; if (childExtra > 0) { child.measure( MeasureSpec.makeMeasureSpec(child.getMeasuredWidth(), MeasureSpec.EXACTLY), MeasureSpec.makeMeasureSpec(largestChildHeight, MeasureSpec.EXACTLY)); } } } } if (!allFillParent && widthMode != MeasureSpec.EXACTLY) { maxWidth = alternativeMaxWidth; } maxWidth += mPaddingLeft + mPaddingRight; // Check against our minimum width maxWidth = Math.max(maxWidth, getSuggestedMinimumWidth()); setMeasuredDimension(resolveSizeAndState(maxWidth, widthMeasureSpec, childState), heightSizeAndState); if (matchWidth) { forceUniformWidth(count, heightMeasureSpec); } }/** * <p>Measure the child according to the parent's measure specs. This * method should be overriden by subclasses to force the sizing of * children. This method is called by {@link #measureVertical(int, int)} and * {@link #measureHorizontal(int, int)}.</p> * * @param child the child to measure * @param childIndex the index of the child in this view * @param widthMeasureSpec horizontal space requirements as imposed by the parent * @param totalWidth extra space that has been used up by the parent horizontally * @param heightMeasureSpec vertical space requirements as imposed by the parent * @param totalHeight extra space that has been used up by the parent vertically */ void measureChildBeforeLayout(View child, int childIndex, int widthMeasureSpec, int totalWidth, int heightMeasureSpec, int totalHeight) { measureChildWithMargins(child, widthMeasureSpec, totalWidth, heightMeasureSpec, totalHeight); }通过上面可知： 三种模式* @param child The child to measure * @param parentWidthMeasureSpec The width requirements for this view * @param widthUsed Extra space that has been used up by the parent * horizontally (possibly by other children of the parent) * @param parentHeightMeasureSpec The height requirements for this view * @param heightUsed Extra space that has been used up by the parent * vertically (possibly by other children of the parent) */ protected void measureChildWithMargins(View child, int parentWidthMeasureSpec, int widthUsed, int parentHeightMeasureSpec, int heightUsed) { final MarginLayoutParams lp = (MarginLayoutParams) child.getLayoutParams(); final int childWidthMeasureSpec = getChildMeasureSpec(parentWidthMeasureSpec, mPaddingLeft + mPaddingRight + lp.leftMargin + lp.rightMargin + widthUsed, lp.width); final int childHeightMeasureSpec = getChildMeasureSpec(parentHeightMeasureSpec, mPaddingTop + mPaddingBottom + lp.topMargin + lp.bottomMargin + heightUsed, lp.height); child.measure(childWidthMeasureSpec, childHeightMeasureSpec); }
以上代码最终执行到：getChildMeasureSpec
这个方法最终确定了 heightMeasureSpec 和 widthMeasureSpec/** * Does the hard part of measureChildren: figuring out the MeasureSpec to * pass to a particular child. This method figures out the right MeasureSpec * for one dimension (height or width) of one child view. * * The goal is to combine information from our MeasureSpec with the * LayoutParams of the child to get the best possible results. For example, * if the this view knows its size (because its MeasureSpec has a mode of * EXACTLY), and the child has indicated in its LayoutParams that it wants * to be the same size as the parent, the parent should ask the child to * layout given an exact size. * * @param spec The requirements for this view * @param padding The padding of this view for the current dimension and * margins, if applicable * @param childDimension How big the child wants to be in the current * dimension * @return a MeasureSpec integer for the child */ public static int getChildMeasureSpec(int spec, int padding, int childDimension) { int specMode = MeasureSpec.getMode(spec); int specSize = MeasureSpec.getSize(spec); int size = Math.max(0, specSize - padding); int resultSize = 0; int resultMode = 0; switch (specMode) { // Parent has imposed an exact size on us case MeasureSpec.EXACTLY: if (childDimension >= 0) { resultSize = childDimension; resultMode = MeasureSpec.EXACTLY; } else if (childDimension == LayoutParams.MATCH_PARENT) { // Child wants to be our size. So be it. resultSize = size; resultMode = MeasureSpec.EXACTLY; } else if (childDimension == LayoutParams.WRAP_CONTENT) { // Child wants to determine its own size. It can't be // bigger than us. resultSize = size; resultMode = MeasureSpec.AT_MOST; } break; // Parent has imposed a maximum size on us case MeasureSpec.AT_MOST: if (childDimension >= 0) { // Child wants a specific size... so be it resultSize = childDimension; resultMode = MeasureSpec.EXACTLY; } else if (childDimension == LayoutParams.MATCH_PARENT) { // Child wants to be our size, but our size is not fixed. // Constrain child to not be bigger than us. resultSize = size; resultMode = MeasureSpec.AT_MOST; } else if (childDimension == LayoutParams.WRAP_CONTENT) { // Child wants to determine its own size. It can't be // bigger than us. resultSize = size; resultMode = MeasureSpec.AT_MOST; } break; // Parent asked to see how big we want to be case MeasureSpec.UNSPECIFIED: if (childDimension >= 0) { // Child wants a specific size... let him have it resultSize = childDimension; resultMode = MeasureSpec.EXACTLY; } else if (childDimension == LayoutParams.MATCH_PARENT) { // Child wants to be our size... find out how big it should // be resultSize = View.sUseZeroUnspecifiedMeasureSpec ? 0 : size; resultMode = MeasureSpec.UNSPECIFIED; } else if (childDimension == LayoutParams.WRAP_CONTENT) { // Child wants to determine its own size.... find out how // big it should be resultSize = View.sUseZeroUnspecifiedMeasureSpec ? 0 : size; resultMode = MeasureSpec.UNSPECIFIED; } break; } return MeasureSpec.makeMeasureSpec(resultSize, resultMode); }
上述代码说明了 heightMeasureSpec 和 widthMeasureSpec是由父布局和子布局共同确定的;
MeasureSpec.EXACTLY
MeasureSpec.AT_MOST
前两种父布局对子布局做了限制；
由于上面两个模式条件下：孩子是wrapContent 则传递到孩子的模式是 MeasureSpec.AT_MOST；
孩子是MatchParent则就要根据父布局了；
MeasureSpec.UNSPECIFIED： 这个条件上面说明是父布局看看自布局多大； 父布局不限制子类；获得子类的大小；
通过LinearLayout熟悉Measure
最新推荐文章于 2024-07-08 21:00:52 发布
本文深入解析LinearLayout中的OnMeasure过程，详细介绍了widthMeasureSpec和heightMeasureSpec的构成及作用，并通过具体代码展示了MeasureSpec如何影响子视图的测量。
扫一扫
1000
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
