「ZigBee模块」基础实验（2）按键

1.实现功能

按键KEY1按下LED1依次亮灭

按键KEY2按下LED2依次亮灭

 

2.元件连接方式

P1_0连接LED1

P1_1连接LED2

P0_0连接KEY1

P0_1连接KEY2

 

3.部分代码分析

按键需要消抖（因为按键选择之后的代码较少，直接写这里面啦）

void keyScan()

{

  if(KEY1 == 0)

  {

    delayms(10);

    if(KEY1 == 0)

    {

      while(!KEY1);

      LED1 = !LED1;

    }

  }

  if(KEY2 == 0)

  {

    delayms(10);

    if(KEY2 == 0)

    {

      while(!KEY2);

      LED2 = !LED2;

    }

  }

}

 

4.完整代码

 

#include <ioCC2530.h>

#define uchar unsigned char
#define uint  unsigned int

#define LED1 P1_0
#define LED2 P1_1
#define KEY1 P0_0
#define KEY2 P0_1

void ledInit();
void keyInit();
void keyScan();
void delayms(uint ms);

void ledInit()
{
  P1SEL &= ~0x03;
  P1DIR |= 0x03;
  P1INP &= ~0x03;
  
  LED1 = 0;
  LED2 = 0;
}

void keyInit()
{
  P0SEL &= ~0x03;
  P0DIR &= ~0x03;
  P0INP &= ~0x03;
}

void keyScan()
{
  if(KEY1 == 0)
  {
    delayms(10);
    if(KEY1 == 0)
    {
      while(!KEY1);
      LED1 = !LED1;
    }
  }
  if(KEY2 == 0)
  {
    delayms(10);
    if(KEY2 == 0)
    {
      while(!KEY2);
      LED2 = !LED2;
    }
  }
}

void delayms(uint ms)
{
  uint i, j;
  for(i=ms; i>0; i--)
    for(j=578; j>0; j--);
}

void main()
{
  ledInit();
  keyInit();
  while(1)
  {
    keyScan();
  }
}

 

 

 

转载于:https://www.cnblogs.com/Donut/p/4123157.html