Question 1
Which of following is the default icon for “.pka” file?
Question 2
Which of the following statements is NOT true?
- Packet Tracer can replace 100% of real equipment
- With Packet Tracer, instructors can customize individual or group learning activities. Students can build, configure, explore, and troubleshoot networks using virtual equipment and simulated connections.
- Packet Tracer is a simulator for educational use, it does not run the actual Cisco IOS, the commands and behavior may not be 100%
identical to Cisco equipment.- Packet Tracer is a valuable and productive tool offered to Cisco Networking Academy instructors, students and alumni.
Question 3
Which of the following is NOT true about “Realtime Mode” & “Simulation Mode”?
- In “Realtime Mode”, your network runs in a model of real time, within the limits of the protocol models used. The network responds to
your actions immediately as they would on a real device.- In “Simulation mode”, if you turn off a port, its link light will not respond immediately by turning red.
- In “Realtime mode”, if you turn off a port, its link light will respond immediately by turning red.
- In “Simulation Mode”, you can “freeze” time – you have direct control over time related to the flow of PDUs (Protocol Data Units).
Question 4
When I try to add a module into a device, Packet Tracer pop-ups a warning message saying “Cannot add a module when the power is on”. How can I solve this problem?
- Close the Packet Tracer application and re-open the file
- Turn off the power button in “Physical Device View” before adding any module
- Click the “Power Cycle Devices” button on the left bottom in the logical view
- Use the “shutdown” command in CLI mode to switch off the device before adding any module
Question 5
How can I open a “.pka” file that an instructor gives me? (Choose all that apply.)
- Open the Packet Tracer application, use short-cut key “Ctrl+O” to open the file
- Double-click the file, Packet Tracer will launch the file if it is installed on my machine
- I cannot open it until I obtain the password from instructor
- Open the Packet Tracer application then choose “open” under the “file” menu
- Click on the [file] icon in Packet Tracer, then choose the file to be opene
Question 6
What can you do with a User Profile?
- Enter your name and email address required by the instructor
- Connect to Facebook
- Add your Photo or avatar to the PT file
- Create a User Account on Packet Tracer
Question 7
Which number represents the button you would select to enter a Network Description?
- 1
- 4
- 2
- 3
Question 8
Where can you create a new building and wiring closet?
- Simulation Workspace
- Virtual Workspace
- Logical Workspace
- Physical Workspace
Question 9
Which button allows you to switch between workspaces?
- 4
- 2
- 3
- 5
- 1
Question 10
How do you display the popup windows to show additional device information?
- Double click the device icon
- Right click the device to select detailed infomation
- File > device info popup
- Hover the mouse cursor over the device icon
Question 11
What should you do before adding a new device module card?
- 1. Click the Power Cycle Devices button
- 2. Click the Power button to turn off the device
- 3. Nothing, simply drag and drop a module card to the router
- 4. Close Packet Tracer and edit the PKT file using a text editor
Question 12
How do you display the interface number where the cable is attached?
- Enter the no shutdown command in interface configuration mode
- Add a text label manually for the interface number
- Hover the mouse cursor over the cable
- On the config tab of the device, select show interface number
Question 13
How do you show the menu that allows you to view the routing and NAT tables in the figure?
- Drag the router icon to the Inspection Tool icon
- Select Inspection tool and select the router icon
- Double click the router icon
- Right click the router icon and select inspection list
Question 14
How do you resize a shape in the logical workspace?
- Enter Ctrl+R key to switch to resize mode and click the red dot
- Select the resize tool and click the red dot
- Move the mouse cursor to the lower right corner of the shape, the resize red dot will appear to resize
- Double click the shape you want to resize and click the red dot
Question 15
What is the function of the “Create Simple PDU” button?
- Send an ICMP packet between devices
- Send an email notification to the instructor
- Send an email between two hosts
- Send a Telnet packet between devices
Question 16
What is the Fire button for?
- Highlight the devices PC-HQ2 and PC-HQ1
- Trigger the integrated Fire Alarm in PC-HQ1 and PC-HQ2
- Trigger a telnet connection from PC-HQ2 to PC-HQ1
- Trigger a connectivity test between PC-HQ2 and PC-HQ1
Question 17
How do you display the step by step packet tracing shown in the figure?
- Click the complex PDU button in Realtime Mode
- It is under the Simulation Model C orrect!
- Click the simple PDU button in Realtime Mode
- It is in the Tools menu and Packet Tracing
Question 18
What is the cable type of the lightning icon?
- Serial WAN Cable
- Apple Lightning Cable
- Automatically Choose Connection Type C orrect!
- Fiber Optical Cable
Question 19
What is the shaded area in the figure represent?
- The GPS geofencing function of a smartphone
- The area you can’t put another building in
- Nothing, it’s just a background image Y ou Answered
- The Wireless Signal Coverage
Question 20
How do you move the wiring closet into the building?
- You cannot move the wiring closet, you have to create a new one in the Office building
- Click the Move Object button and select the wiring closet and the destination C orrect Answer
- Right click the wiring closet, select cut and paste it into the Office Building
- Drag the wiring closet icon to the Office Building
Question 21
Where can you open the physical location menu to drag a device between locations?
- Click the Navigation button in Physical View C orrect Answer
- Click the Working Closet in Simulation View
- Click the Working Closet in Physical View
- Click the Navigation button in Simulation View
Question 22
What does PKA stands for?
- Packet Tracer Answer
- Packet Tracer ActionScript
- Packet Tracer Auto-Run
- Packet Tracer Activity
Question 23
How do you perform the group copy that is shown in the diagram?
- Select multiple devices, press the Shift key, click and drag
- Select multiple devices, press the Alt key, click and drag
- Select multiple devices, press the Windows key, click and drag
- Select multiple devices, press the Control key, click and drag
Question 24
What does the orange light mean?
- The port is not forwarding data due to Spanning Tree Correct!
- The cable type is wrong
- The port is shutdown
- The switch is shutting down