无线80211错误码解析

Deauthentication Reason Codes
Client Reason Code Description Meaning Poor Man Explaination
0 noReasonCode Normal operation.
1 unspecifiedReason Client associated but no longer authorized. We don’t know what’s wrong
2 previousAuthNotValid Client associated but not authorized.
3 deauthenticationLeaving The access point went offline, deauthenticating the client. Deauthenticated because sending STA is leaving (or has left) IBSS or ESS
4 disassociationDueToInactivity Client session timeout exceeded. Disassociated due to inactivity
5 disassociationAPBusy The access point is busy, performing load balancing, for example. Disassociated because AP is unable to handle all currently associated STAs
6 class2FrameFromNonAuthStation Client attempted to transfer data before it was authenticated. Class 2 frame received from nonauthenticated STA
7 class2FrameFromNonAssStation Client attempted to transfer data before it was associated. Class 3 frame received from nonassociated STA
8 disassociationStaHasLeft Operating System moved the client to another access point using non-aggressive load balancing. Disassociated because sending STA is leaving (or has left) BSS
9 staReqAssociationWithoutAuth Client not authorized yet, still attempting to associate with an access point. STA requesting (re)association is not authenticated with responding STA
10 Disassociated because the information in the Power Capability element is unacceptable
11 Disassociated because the information in the Supported Channels element is unacceptable
12 Reserved Not Used or Special Purpose
13 Invalid information element.
14 Message integrity code (MIC) failure
15 4-Way Handshake timeout
16 Group Key Handshake timeout
17 Information element in 4-Way Handshake different from (Re)Association Request/Probe Response/Beacon frame
18 Invalid group cipher or Association denied due to requesting STA not supporting all of the data rates in the BSSBasicRateSet parameter NEW The link speed requested by the client or AP is incompatible. (i,e. trying to operate N only speeds on a G AP)
19 Invalid pairwise cipher
20 Invalid AKMP
21 Unsupported RSN information element version
22 Invalid RSN information element capabilities
23 IEEE 802.1X authentication failed
24 Cipher suite rejected because of the security policy
25-31 Reserved Not Used or Special Purpose
32 Disassociated for unspecified, QoS-related reason Quality of Service has denied the action.
33 Disassociated because QoS AP lacks sufficient bandwidth for this QoS STA
34 Disassociated because excessive number of frames need to be acknowledged, but are not acknowledged due to AP transmissions and/or poor channel conditions
35 Disassociated because STA is transmitting outside the limits of its TXOPs
36
37
38 Requested from peer STA as the STA received frames using the mechanism for which a setup is required
39 Requested from peer STA due to timeout
45 Peer STA does not support the requested cipher suite
45-65 Reserved Not Used or Special Purpose
99 missingReasonCode Typically “No Reason Code” / Unknown State
535 Reserved Not Used or Special Purpose
The first few reason codes where helpful while debugging my wifi related issues.