Spring源码初探 -在AbstractApplicationContext中的refresh简单理解

@Override
	public void refresh() throws BeansException, IllegalStateException {
		synchronized (this.startupShutdownMonitor) {
			StartupStep contextRefresh = this.applicationStartup.start("spring.context.refresh");

			// Prepare this context for refreshing.
			prepareRefresh();

		// Tell the subclass to refresh the internal bean factory.
     // 这步比较关键，这步完成后，配置文件就会解析成一个个 Bean 定义，注册到 BeanFactory 中，
     // 当然，这里说的 Bean 还没有初始化，只是配置信息都提取出来了，
     // 注册也只是将这些信息都保存到了注册中心(说到底核心是一个 beanName-> beanDefinition 的 map)
			ConfigurableListableBeanFactory beanFactory = obtainFreshBeanFactory();

			// Prepare the bean factory for use in this context.
			prepareBeanFactory(beanFactory);

			try {
				// Allows post-processing of the bean factory in context subclasses.
				postProcessBeanFactory(beanFactory);

				StartupStep beanPostProcess = this.applicationStartup.start("spring.context.beans.post-process");
				// Invoke factory processors registered as beans in the context.
				invokeBeanFactoryPostProcessors(beanFactory);

				// Register bean processors that intercept bean creation.
				registerBeanPostProcessors(beanFactory);
				beanPostProcess.end();

				// Initialize message source for this context.
				initMessageSource();

				// Initialize event multicaster for this context.
				initApplicationEventMulticaster();

				// Initialize other special beans in specific context subclasses.
				onRefresh();

				// Check for listener beans and register them.
				registerListeners();

				// Instantiate all remaining (non-lazy-init) singletons.
				finishBeanFactoryInitialization(beanFactory);

				// Last step: publish corresponding event.
				finishRefresh();
			}

一共十三个方法

这步我们使用debug来查看new ClassPathXmlApplicationContext来进一步理解

1

 2

 3

4

 在进行初始化之后就开始进行我们的refresh方法

refersh的组件

1prepareRefresh 

准备刷新 其中就只是创建了启动时间，设置容器的活跃，初始化资源，获得环境对象并验证，还有创建了一系列的Set集合，并没有创建BeanFactory

	/**
	 * Prepare this context for refreshing, setting its startup date and
	 * active flag as well as performing any initialization of property sources.
	 */
	protected void prepareRefresh() {
		// Switch to active.
		this.startupDate = System.currentTimeMillis();//设置启动时间
		this.closed.set(false);//设置容器关闭为false
		this.active.set(true);//设置容器活跃为true

		if (logger.isDebugEnabled()) {
			if (logger.isTraceEnabled()) {
				logger.trace("Refreshing " + this);
			}
			else {
				logger.debug("Refreshing " + getDisplayName());
			}
		}

		// Initialize any placeholder property sources in the context environment.
		initPropertySources();//初始化属性资源 留给子类实现

		// Validate that all properties marked as required are resolvable:
		// see ConfigurablePropertyResolver#setRequiredProperties
		getEnvironment().validateRequiredProperties();//获取环境对象并且验证属性值
        // 里面有createEnviroment--> new StandardEnvironment

		// Store pre-refresh ApplicationListeners...
        //创建一系列的set集合
		if (this.earlyApplicationListeners == null) {
			this.earlyApplicationListeners = new LinkedHashSet<>(this.applicationListeners);
		}
		else {
			// Reset local application listeners to pre-refresh state.
			this.applicationListeners.clear();
			this.applicationListeners.addAll(this.earlyApplicationListeners);
		}

		// Allow for the collection of early ApplicationEvents,
		// to be published once the multicaster is available...
		this.earlyApplicationEvents = new LinkedHashSet<>();
	}

2obtainFreshBeanFactory 获得新鲜的BeanFactory

该方法还是在AbstractApplicationContext中

	protected ConfigurableListableBeanFactory obtainFreshBeanFactory() {
		refreshBeanFactory();
		return getBeanFactory();
	}

然后进入到refreshBeanFactory（）

	/**
	 * This implementation performs an actual refresh of this context's underlying
	 * bean factory, shutting down the previous bean factory (if any) and
	 * initializing a fresh bean factory for the next phase of the context's lifecycle.
	 */
	@Override
	protected final void refreshBeanFactory() throws BeansException {
        //判断有没有Bean工厂 有的话就销毁
		if (hasBeanFactory()) {
			destroyBeans();
			closeBeanFactory();
		}
		try {
        //在判断没有bean工厂后 createBeanFactory 创建出 DefaultListableBeanFactory 
        // return new DefaultListableBeanFactory(getInternalParentBeanFactory());
			DefaultListableBeanFactory beanFactory = createBeanFactory();
			beanFactory.setSerializationId(getId());//序列化id值
			customizeBeanFactory(beanFactory);//
			loadBeanDefinitions(beanFactory);
			this.beanFactory = beanFactory;
		}
		catch (IOException ex) {
			throw new ApplicationContextException("I/O error parsing bean definition source for " + getDisplayName(), ex);
		}
	}

其中的customizeBeanFactory 设置属性值

	/**
	 * Customize the internal bean factory used by this context.
	 * Called for each {@link #refresh()} attempt.
	 * <p>The default implementation applies this context's
	 * {@linkplain #setAllowBeanDefinitionOverriding "allowBeanDefinitionOverriding"}
	 * and {@linkplain #setAllowCircularReferences "allowCircularReferences"} settings,
	 * if specified. Can be overridden in subclasses to customize any of
	 * {@link DefaultListableBeanFactory}'s settings.
	 * @param beanFactory the newly created bean factory for this context
	 * @see DefaultListableBeanFactory#setAllowBeanDefinitionOverriding
	 * @see DefaultListableBeanFactory#setAllowCircularReferences
	 * @see DefaultListableBeanFactory#setAllowRawInjectionDespiteWrapping
	 * @see DefaultListableBeanFactory#setAllowEagerClassLoading
	 */
protected void customizeBeanFactory(DefaultListableBeanFactory beanFactory) {
   if (this.allowBeanDefinitionOverriding != null) {
      // 是否允许 Bean 定义覆盖
      beanFactory.setAllowBeanDefinitionOverriding(this.allowBeanDefinitionOverriding);
   }
   if (this.allowCircularReferences != null) {
      // 是否允许 Bean 间的循环依赖
      beanFactory.setAllowCircularReferences(this.allowCircularReferences);
   }
}

在执行完序列化setSerialization和设置属性值之后beanFactory所含有的值，特别注意beanDefinitionMap与beanDefinitionName

 在loadBeanDefinition之后Bean信息加载到容器中

	/**
	 * Loads the bean definitions via an XmlBeanDefinitionReader.
	 * @see org.springframework.beans.factory.xml.XmlBeanDefinitionReader
	 * @see #initBeanDefinitionReader
	 * @see #loadBeanDefinitions
	 */
	@Override
	protected void loadBeanDefinitions(DefaultListableBeanFactory beanFactory) throws BeansException, IOException {
		// Create a new XmlBeanDefinitionReader for the given BeanFactory.
		XmlBeanDefinitionReader beanDefinitionReader = new XmlBeanDefinitionReader(beanFactory);

		// Configure the bean definition reader with this context's
		// resource loading environment.
		beanDefinitionReader.setEnvironment(this.getEnvironment());
		beanDefinitionReader.setResourceLoader(this);
		beanDefinitionReader.setEntityResolver(new ResourceEntityResolver(this));

		// Allow a subclass to provide custom initialization of the reader,
		// then proceed with actually loading the bean definitions.
		initBeanDefinitionReader(beanDefinitionReader);
		loadBeanDefinitions(beanDefinitionReader);
	}

3prepareBeanFactory（beanFactory）

/**
 * Configure the factory's standard context characteristics,
 * such as the context's ClassLoader and post-processors.
 * @param beanFactory the BeanFactory to configure
 */
protected void prepareBeanFactory(ConfigurableListableBeanFactory beanFactory) {
   // 设置 BeanFactory 的类加载器，我们知道 BeanFactory 需要加载类，也就需要类加载器，
   // 这里设置为加载当前 ApplicationContext 类的类加载器
   beanFactory.setBeanClassLoader(getClassLoader());

   // 设置 BeanExpressionResolver
   beanFactory.setBeanExpressionResolver(new StandardBeanExpressionResolver(beanFactory.getBeanClassLoader()));
   // 
   beanFactory.addPropertyEditorRegistrar(new ResourceEditorRegistrar(this, getEnvironment()));

   // 添加一个 BeanPostProcessor，这个 processor 比较简单：
   // 实现了 Aware 接口的 beans 在初始化的时候，这个 processor 负责回调，
   // 这个我们很常用，如我们会为了获取 ApplicationContext 而 implement ApplicationContextAware
   // 注意：它不仅仅回调 ApplicationContextAware，
   //   还会负责回调 EnvironmentAware、ResourceLoaderAware 等，看下源码就清楚了
   beanFactory.addBeanPostProcessor(new ApplicationContextAwareProcessor(this));

   // 下面几行的意思就是，如果某个 bean 依赖于以下几个接口的实现类，在自动装配的时候忽略它们，
   // Spring 会通过其他方式来处理这些依赖。
   beanFactory.ignoreDependencyInterface(EnvironmentAware.class);
   beanFactory.ignoreDependencyInterface(EmbeddedValueResolverAware.class);
   beanFactory.ignoreDependencyInterface(ResourceLoaderAware.class);
   beanFactory.ignoreDependencyInterface(ApplicationEventPublisherAware.class);
   beanFactory.ignoreDependencyInterface(MessageSourceAware.class);
   beanFactory.ignoreDependencyInterface(ApplicationContextAware.class);

   /**
    * 下面几行就是为特殊的几个 bean 赋值，如果有 bean 依赖了以下几个，会注入这边相应的值，
    * 之前我们说过，"当前 ApplicationContext 持有一个 BeanFactory"，这里解释了第一行。
    * ApplicationContext 还继承了 ResourceLoader、ApplicationEventPublisher、MessageSource
    * 所以对于这几个依赖，可以赋值为 this，注意 this 是一个 ApplicationContext
    * 那这里怎么没看到为 MessageSource 赋值呢？那是因为 MessageSource 被注册成为了一个普通的 bean
    */
   beanFactory.registerResolvableDependency(BeanFactory.class, beanFactory);
   beanFactory.registerResolvableDependency(ResourceLoader.class, this);
   beanFactory.registerResolvableDependency(ApplicationEventPublisher.class, this);
   beanFactory.registerResolvableDependency(ApplicationContext.class, this);

   // 这个 BeanPostProcessor 也很简单，在 bean 实例化后，如果是 ApplicationListener 的子类，
   // 那么将其添加到 listener 列表中，可以理解成：注册 事件监听器
   beanFactory.addBeanPostProcessor(new ApplicationListenerDetector(this));

   // 这里涉及到特殊的 bean，名为：loadTimeWeaver，这不是我们的重点，忽略它
   // tips: ltw 是 AspectJ 的概念，指的是在运行期进行织入，这个和 Spring AOP 不一样，
   //    感兴趣的读者请参考我写的关于 AspectJ 的另一篇文章 https://www.javadoop.com/post/aspectj
   if (beanFactory.containsBean(LOAD_TIME_WEAVER_BEAN_NAME)) {
      beanFactory.addBeanPostProcessor(new LoadTimeWeaverAwareProcessor(beanFactory));
      // Set a temporary ClassLoader for type matching.
      beanFactory.setTempClassLoader(new ContextTypeMatchClassLoader(beanFactory.getBeanClassLoader()));
   }

   /**
    * 从下面几行代码我们可以知道，Spring 往往很 "智能" 就是因为它会帮我们默认注册一些有用的 bean，
    * 我们也可以选择覆盖
    */

   // 如果没有定义 "environment" 这个 bean，那么 Spring 会 "手动" 注册一个
   if (!beanFactory.containsLocalBean(ENVIRONMENT_BEAN_NAME)) {
      beanFactory.registerSingleton(ENVIRONMENT_BEAN_NAME, getEnvironment());
   }
   // 如果没有定义 "systemProperties" 这个 bean，那么 Spring 会 "手动" 注册一个
   if (!beanFactory.containsLocalBean(SYSTEM_PROPERTIES_BEAN_NAME)) {
      beanFactory.registerSingleton(SYSTEM_PROPERTIES_BEAN_NAME, getEnvironment().getSystemProperties());
   }
   // 如果没有定义 "systemEnvironment" 这个 bean，那么 Spring 会 "手动" 注册一个
   if (!beanFactory.containsLocalBean(SYSTEM_ENVIRONMENT_BEAN_NAME)) {
      beanFactory.registerSingleton(SYSTEM_ENVIRONMENT_BEAN_NAME, getEnvironment().getSystemEnvironment());
   }
}