RTP数据分析

How to decode and playback G729 audio streams:

http://wiki.media5corp.com/wiki/index.php?title=Debug_%26_Troubleshooting_-_How_to_decode_and_playback_G729_audio_streams

使用wildpackets omnipeek、wireshark、rtptool、voice_age 分析G.729语音质量:

G.729
方法一：
1 ：wireshark：  Capture the traffic using Etherealand dumping the RTP data (Statistics -> RTP -> Show all streams ->SaveAs)。
2：Use rtpdump (http://www.cs.columbia.edu/IRT/software/rtptools/)to dump only the audio payload (“rtpdump -F payload -f in.rtp -o out.rtp”)
3：Use VoiceAge decoder. In windows CMD,  (va_g729_decoder.exe out.rtp out.pcm).
4: Play out.pcm useing cool edit pro 2.0 or GoldWave 16bit signed/unsigned 8000Hz.


方法二：1 ：wireshark：  Capture the traffic using Etherealand dumping the RTP data (Statistics -> RTP -> Show all streams ->analyze->--Save Payload( select .raw and forward))。注分析前需要去掉DTMF-Rtpevent， 否则影响最终的729decode.
2：Use VoiceAge decoder. In windows CMD,  (va_g729_decoder.exe out.raw out.pcm).
3: Play out.pcm useing cool edit pro 2.0 or GoldWave 16bit signed/unsigned 8000Hz.

     - signed 16-bit pc

     - no endianness

     - 1 channel (mono)

     - start offset: 0

     - amount to import: 100%

     - sample rate: 8000

Wireshark Sniffing: SIP and RTP

http://www.unappel.ch/public/100119-wireshark-xlite/

How to save RTP Streams from Wireshark and Play it using an application called Audacity - See more at: https://supportforums.cisco.com/discussion/11517891/how-save-rtp-streams-wireshark-and-play-it-using-application-called-audacity#sthash.7EYWGCYp.dpuf

https://supportforums.cisco.com/discussion/11517891/how-save-rtp-streams-wireshark-and-play-it-using-application-called-audacity