![](https://img-blog.csdnimg.cn/20201014180756922.png?x-oss-process=image/resize,m_fixed,h_64,w_64)
ARM
文章平均质量分 72
bloghome
这个作者很懒,什么都没留下…
展开
-
2008年10月21日记录(任务有待进一步完成)
[fedora@localhost lqm]$ pwd/home/fedora/lqm[fedora@localhost lqm]$ mkdir embedded-system[fedora@localhost lqm]$ lsembedded-system[fedora@localhost lqm]$ cd embedded-system/[fedora@localhost embedded-s原创 2008-10-21 19:47:00 · 1077 阅读 · 0 评论 -
Linphone compile and install
linphonehttp://www.linphone.org/ OSip http://www.gnu.org/software/osip/The GNU oSIP library is written in C and get no dependencies except the standard C library. oSIP is thread safe and wil原创 2009-08-12 10:03:00 · 1125 阅读 · 0 评论 -
jRTPlib
发送:获得接收端的 IP 地址和端口号 创建 RTP 会话 指定 RTP 数据接收端 设置 RTP 会话默认参数 发送流媒体数据接收:获得用户指定的端口号 创建RTP会话 设置接收模式 接受RTP数据 检索RTP数据源 获取RTP数据报 删除RTP数据报 环境搭建及编译方法pc 、arm 参考:ht原创 2009-08-10 17:14:00 · 679 阅读 · 0 评论 -
SIP and RTP Stack
SIP and RTP Stack Note: I only searched for C/C++ stacks andapplications. There also exist a lot of stacks and applications forother programming languages, especially for java. If you are lookingfor原创 2009-08-05 18:22:00 · 2932 阅读 · 0 评论 -
waveOutReset的N种死法, 及其解决方案
我遭遇到了调用waveOutReset死锁的问题,在GOOGLE上一搜,遇到同样问题的人还真不少,但没有人很明确地找到造成DEADLOCK的原因,都是糊里糊涂就把问题解决了,然后把运行OK的代码一贴完事。我花了四五个小时才彻底摸清楚规律,把这经验拿出来共享原则:(1) waveOutReset不是立即返回的函数, 而需要等待驻留在WAVEDEV里的音频BUFFER全部标记为转载 2009-08-03 11:13:00 · 908 阅读 · 1 评论 -
Qt/Embedded图形化开发
完整 编译 qte 空间 大于 1g 时间 大于 50分钟 熬吧 http://www.dzkf.cn/html/qianrushixitong/2007/1108/2771.html嵌入式GUI为嵌入式系统提供了人机交互界面, 大大方便了嵌入式系统的人机交互,进而加速了嵌入式系统的流行。无论是智能手机、PDA还是MP4、PMP (个人媒体播放器)的流行,转载 2008-11-30 20:48:00 · 1328 阅读 · 0 评论 -
用GPRS modem实现嵌入式Internet接入系统
引言 随着GPRS技术在无线通信领域的发展,GPRSmodem作为GPRS在Internet的PC机终端已得到了广泛应用。相应的,在单片机系统中运用GPRSmodem实现Internet接入也已开始为人们所重视。GPRS可以发挥永远在线、快速登录、按流量计费等优势。如果无线传输的仅仅只是低速数据,用成本较高的PC机来控制则成本过高。本文采用在嵌入式实时操作系统uC/OS-II中移植一种小型T转载 2008-11-28 18:17:00 · 1062 阅读 · 0 评论 -
MMS实现详细分析(BENQ M22模块)*--(2)---MMS PDU的头域和二进制编码分析
MMS实现详细分析(BENQ M22模块)*--(2)---MMS PDU的头域和二进制编码分析为了便于理解,以下以发送请求(M-Send.req) PDU为例,对MMS PDU的头域和二进制编码进行了分析。MMS PDU的头域具体含义见表MMS头: 8C—表示X-Mms-Message-Type 80— m-send-req 98— X-Mms转载 2008-11-13 17:39:00 · 2675 阅读 · 0 评论 -
MMS实现详细分析(BENQ M22模块)*--(1)---------MMS实现的流程分析
MMS实现详细分析(BENQ M22模块)*--(1)---------MMS实现的流程分析基于MMS的终端系统中,MMS实现的步骤如下: (1)串口初始化和设置模块参数; (2)经过处理模块处理过的数据流在控制模块控制下,按照MMS协议封装格式进行MMS信息封装; (3)无线模块与GPRS的WAP网关进行连接,向串口发出拨号连接的AT命令,建立发送数据的PPP链路;转载 2008-11-13 17:35:00 · 2473 阅读 · 1 评论 -
MMS实现详细分析(BENQ M22模块*--(4)------PPP协议分析
MMS实现详细分析(BENQ M22模块*--(4)------PPP协议分析利用AT指令无线模块连接上了中国移动的GPRS的WAP网关之后,接着是进行PPP连接。 GPRS拨号采用的是点对点协议(Point to Point Protocol, PPP),该协议是是TCP/IP网络协议包的一个成员。其主要作用是无线模块通过拨号连接上终端服务器后,由PPP取得一个临时的IP地址,使该设备成为网络转载 2008-11-13 17:42:00 · 2883 阅读 · 0 评论 -
MMS实现详细分析(BENQ M22模块*--(3)------MMS发送的无线网络连接协议分析
MMS实现详细分析(BENQ M22模块*--(3)------MMS发送的无线网络连接协议分析MMS在进行发送前,要对无线模块进行无线网络连接,实现GPRS的拨号上网,无线网络连接成功后,才能利用无线模块基于WAP的方式对MMS进行发送,通过移动交换网络,最终发送到终端用户手机上。本节将对无线模块的拨号上网以及建立PPP连接链路的流程图和所用到的协议,如AT指令集、PPP连接协议以及本课题中捕转载 2008-11-13 17:41:00 · 1665 阅读 · 0 评论 -
Qt/QTE 编译安装问题与解决方法 (3)
yesterday s problem has been solved.all shell commands are as follows. [john@localhost ~]$ su密码:[root@localhost john]# cd ~/2410clQt[root@localhost 2410clQt]# # export QT2DIR=/root/2410clQt/qt-2.3.2[原创 2008-11-04 16:58:00 · 1115 阅读 · 0 评论 -
Qt/QTE 编译安装问题与解决方法(2)
lets continue the unfinished work.first,try to run the dome in Qt/Embedded directory.[john@localhost ~]$ cd /root/bash: cd: /root/: 权限不够[john@localhost ~]$ su密码:[root@localhost john]# cd /root/[root@原创 2008-11-03 19:35:00 · 4075 阅读 · 0 评论 -
Qt/QTE 编译安装问题与解决方法
编译Qt/Embedded 编译过程出现错误:error 1/root/2410clQt/qt-2.3.2/include/qvaluestack.h:57: 错误:不能将‘int remove(const char*)’的实参‘1’从‘QValueListIterator >’转换到‘const char*’/root/2410clQt/qt-2.3.2/include/qvaluestack.原创 2008-11-01 18:32:00 · 3585 阅读 · 0 评论 -
error: undefined reference to `pthread_create'
error exist while using gcc to a source file which used the pthread library.its because the gcc parameter is not enough.you can solve it with -lpthread:egg:gcc mythread.c -o mythread -l pthread原创 2008-11-01 14:52:00 · 767 阅读 · 0 评论 -
2008.10.30's records
[john@localhost build-binutils]$ # 6[john@localhost build-binutils]$ cd $PRJROOT/setup-dir[john@localhost setup-dir]$ mv gcc-core-2.95.3.tar.gz gcc-2.95.3.tar.gz #rename[john@localhost setup-dir]$ lsb原创 2008-10-30 11:22:00 · 888 阅读 · 0 评论 -
NAND flash vs NOR flash
● NOR的读速度比NAND稍快一些。 ● NAND的写入速度比NOR快很多。 ● NAND的4ms擦除速度远比NOR的5s快。 ● 大多数写入操作需要先进行擦除操作。 ● NAND的擦除单元更小,相应的擦除电路更少。 nor 1988 intel , 芯片内部执行, 写入擦除速度低 , 传输速度高nand 1989 东芝,高存储密度,原创 2009-10-12 16:52:00 · 569 阅读 · 0 评论