configure

iTom

已于 2023-04-20 11:41:36 修改

阅读量246

点赞数

文章标签： ssl https 服务器

于 2023-04-17 13:39:04 首次发布

本文链接：https://blog.csdn.net/c2unix/article/details/130198172

版权

#
# Recommended minimum configuration:
#

# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed

acl localnet src 10.0.0.0/8   # RFC1918 possible internal network
acl localnet src 172.16.0.0/12   # RFC1918 possible internal network
acl localnet src 192.168.0.0/16   # RFC1918 possible internal network
acl localnet src fc00::/7 # RFC 4193 local private network range
acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines

acl SSL_ports port 443
acl Safe_ports port 80       # http
acl Safe_ports port 21       # ftp
acl Safe_ports port 443       # https
acl Safe_ports port 70       # gopher
acl Safe_ports port 210       # wais
acl Safe_ports port 1025-65535   # unregistered ports
acl Safe_ports port 280       # http-mgmt
acl Safe_ports port 488       # gss-http
acl Safe_ports port 591       # filemaker
acl Safe_ports port 777       # multiling http
acl CONNECT method CONNECT

#
# Recommended minimum Access Permission configuration:
#

# Only allow cachemgr access from localhost
http_access allow localhost manager
http_access deny manager

# Deny requests to certain unsafe ports
http_access deny !Safe_ports

# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports

# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost

#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#

# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
http_access allow localnet
http_access allow localhost

# And finally deny all other access to this proxy
http_access allow all

# Squid normally listens to port 3128
http_port 13128

# Uncomment the line below to enable disk caching - path format is /cygdrive/<full path to cache folder>, i.e.
#cache_dir aufs /cygdrive/d/squid/cache 3000 16 256

# Leave coredumps in the first cache dir
coredump_dir /var/cache/squid

# Add any of your own refresh_pattern entries above these.
refresh_pattern ^ftp:       1440   20%   10080
refresh_pattern ^gopher:   1440   0%   1440
refresh_pattern -i (/cgi-bin/|\?) 0   0%   0
refresh_pattern .       0   20%   4320

dns_nameservers 8.8.8.8 8.8.4.4

max_filedescriptors 3200

; Sample stunnel configuration file for Win64 by Michal Trojnara 2002-2023
; Some options used here may be inadequate for your particular configuration
; This sample file does *not* represent stunnel.conf defaults
; Please consult the manual for detailed description of available options

; **************************************************************************
; * Global options *
; **************************************************************************

; Debugging stuff (may be useful for troubleshooting)
;debug = info
;output = stunnel.log

; Enable FIPS 140-2 mode if needed for compliance
;fips = yes

; Microsoft CryptoAPI engine allows for authentication with private keys
; stored in the Windows certificate store
; Each section using this feature also needs the "engineId = capi" option
;engine = capi
; You also need to disable TLS 1.2 or later, because the CryptoAPI engine
; currently does not support PSS
;sslVersionMax = TLSv1.1
; TLSv1.1 requires security level 0 when compiled OpenSSL 3.0 and later
;securityLevel = 0

; The pkcs11 engine allows for authentication with cryptographic
; keys isolated in a hardware or software token
; MODULE_PATH specifies the path to the pkcs11 module shared library,
; such as softhsm2-x64.dll or opensc-pkcs11.dll
; IMPORTANT: A 64-bit stunnel requires 64-bit PKCS#11 modules
; Each section using this feature also needs the "engineId = pkcs11" option
;engine = pkcs11
;engineCtrl = MODULE_PATH:softhsm2-x64.dll
;engineCtrl = PIN:1234

; **************************************************************************
; * Service defaults may also be specified in individual service sections *
; **************************************************************************

; Enable support for the insecure SSLv3 protocol
;options = -NO_SSLv3

; These options provide additional security at some performance degradation
;options = SINGLE_ECDH_USE
;options = SINGLE_DH_USE

; **************************************************************************
; * Include all configuration file fragments from the specified folder *
; **************************************************************************

;include = conf.d

; **************************************************************************
; * Service definitions (at least one service has to be defined) *
; **************************************************************************

; ***************************************** Example TLS client mode services

; ***************************************** Example TLS server mode services

[squid-proxy]
accept = 13129
connect = 13128
cert = stunnel.pem

; **************************************************************************
; * Global options *
; **************************************************************************

; Debugging stuff (may be useful for troubleshooting)
;debug = info
;output = stunnel.log

; Enable FIPS 140-2 mode if needed for compliance
;fips = yes