转载请注明出处:http://blog.csdn.net/qinjuning
最近终于成功的摆脱了FM收音机,迈向了新的模块:锁屏、状态栏、Launcher---姑且称之为“IDLE”小组,或许叫手机
美容小组,要是能施展下周星星同学的还我漂漂拳,岂不快哉。 OK,闲话打住,咱开始正文。
本文主要内容:
1、分析锁屏界面的组成 ;
2、基于源代码分析锁屏相关类 ;
3、提出一种在框架取消锁屏的方法 。
花了一些时间研究Android原生的锁屏框架---Keyguard,今天就慢慢的讲解下我自己对这个模块的总结,因为目前还处于
理论学习的状况,很多细节以及功能上的实现有待后续的补充完整。
本文分析适合Android2.2和2.3版本,Android4.0尚不清楚。整个锁屏源码基本上完全一样,只是改变了文件存放路径而已。
本文分析版本具体是Android2.3版本。
源文件路径主要有两个:
frameworks\base\policy\src\com\android\internal\policy\impl\ ---->锁屏框架
frameworks\base\core\java\com\android\internal\widget\ ----> 提供了一些的自定义View.
一、锁屏界面的组成
通常 Android手机上大家常见的界面只有一种,成功后即可解锁进入界面了。其实在Android手机中,正常的锁屏界面由
两种不同性质的界面组成:
第一种界面称之为LockScreen界面(为了叙述方便,我们姑且称为“解锁界面),即我们通常所见到的界面,手机厂商一般定制
该界面。界面如下所示:
该界面对应自定义View的是LockScreen.java类
路径位于:frameworks\policies\base\phone\com\android\internal\policy\impl\LockScreen.java
第二种界面称之为UnLockScreen(为了后文叙述方便,我们姑且称为“开锁界面”),一般由Android源码提供,有如下四种:
①、图案开锁界面 ---- PatternUnlockScreen.java类 (自定义LinearLayout)
路径位于:frameworks\policies\base\phone\com\android\internal\policy\impl\PatternUnlockScreen.java
界面显示为:
②、PIN开锁界面 ---- SimUnlockScreen.java 类 (自定义LinearLayout)
路径位于:frameworks\policies\base\phone\com\android\internal\policy\impl\SimUnlockScreen.java
界面显示为: (图片省略)
③、密码开锁界面 ---- PasswordUnlockScreen.java类 (自定义LinearLayout)
路径位于:frameworks\policies\base\phone\com\android\internal\policy\impl\PasswordUnlockScreen.java
界面显示为:
④、GoogleAccount 开锁界面 ,即Google账户开锁界面。一般用于当用户输入密码错误次数超过上限值时,系统会提示
你输入Google账户去开锁。注意:开启它需要你手动设置账户与同步,否则该界面是不会出来的。
对应的源文件是: AccountUnlockScreen.java类 (自定义LinearLayout)
路径位于:frameworks\policies\base\phone\com\android\internal\policy\impl\AccountUnlockScreen.java
界面显示为:
可以按照如下办法选择开启哪一种开锁界面: 设置—>位置和安全—>设置屏幕锁定 ,具体选择那种开锁界面。
显示规则
当然,这两种界面的组合也是有很多变化的,总的规则如下:
首先显示LockScreen界面,接着判断是否开启了UnLockScreen界面,如果设置了UnLockScreen界面,则进入对应的
UnLockScreen界面去解锁,才算成功解锁。但,存在一种特殊的情况,就是假如我们选择了图案 UnLockScreen界面,是不会
显示LockScreen界面,而只会显示UnLockScreen界面。
二、锁屏界面的实现
我们知道, 任何一种界面都是由各种View/ViewGroup(当然包括自定义的)组成的,然后根据系统对应的状态值的改变去更新
这些View的显示状态,锁屏界面自然也是如此。锁屏界面的实现最顶层是采用了FrameLayout去控制的,当然内部也嵌套了很
多层,内嵌层数的增多的一点好处就是我们可以分开而治,具体针对每层去做相应的更新。难处就是看代码看的很蛋疼。
当界面复杂时,我不得不提Google为开发人员提供的一款优秀工具了---Hierarchy Viewer ,通过它,我们很清晰的弄明白整
个View树的继承层次,一个布局结构,当然,看源代码也是必须的。
关于Hierarchy Viewer的使用请参考该博客:
《Android 实用工具Hierarchy Viewer实战》
整个锁屏界面的继承层次如下(部分以及设置了图案开锁界面),更加完整的图请使用Hierarchy Viewer 工具查看。
上图中比较重要的几个视图说明如下:
LockPatternKeyguardView 继承至FrameLayout :作为LockScreen和UnLockScreen的载体,用来控制显示LockScreen
还是UnLockScreen界面。
LockScreen 继承至FrameLayout
PatterUnlockScreen ViewGroup类型 : 图案解锁界面
KeyguardViewHost继承至FrameLayout, 该ViewGroup作为顶层View,作为WindowManager的装饰对象添加至窗口。
它和LockPatternKeyguardView关系相当于DecorView和我们Activity内设置的资源布局一样。
三、锁屏机制的类结构说明
看了几天代码,才稍微的理清了下头绪。看完后给我的感觉就是代码之间太BT了,几个类的唯一实例传来传去,太容易混
乱了。接下来我们分析下一些主要的类及其重要的函数,更多函数实现,大家可以自己参考源代码。
PS : 由于这些类的结构图比较简单,因此就没画类图了。主要是从源码角度来分析这些代码逻辑。
1、 KeyguardScreen 类 接口
功能:该接口的主要功能是为每个需要显示的界面:LockScreen或者UnLockScreen定义了四个方法,使其在不同的状态能够
得到相应处理。优点就是: 利用设计原则的面向接口编程,减少对具体对象的依赖。
路径:\frameworks\base\policy\src\com\android\internal\policy\impl\KeyguardScreen.java
其源代码释义如下:
- /**
- * Common interface of each {@link android.view.View} that is a screen of
- * {@link LockPatternKeyguardView}.
- */
- public interface KeyguardScreen {
- /** Return true if your view needs input, so should allow the soft
- * keyboard to be displayed. */
- boolean needsInput(); //View是否需要输入数值,即该界面需要键盘输入数值
- /** This screen is no longer in front of the user.*/
- void onPause();//当该界面不处于前台界面时调用,包括处于GONE或者该界面即将被remove掉
- /** This screen is going to be in front of the user. */
- void onResume();//相对于onPause()方法,当该界面不处于前台界面时调用,处于VISIBLE状态时调用
- /** This view is going away; a hook to do cleanup. */
- void cleanUp();//该界面即将被remove掉 ,即不在需要
- }
/**
* Common interface of each {@link android.view.View} that is a screen of
* {@link LockPatternKeyguardView}.
*/
public interface KeyguardScreen {
/** Return true if your view needs input, so should allow the soft
* keyboard to be displayed. */
boolean needsInput(); //View是否需要输入数值,即该界面需要键盘输入数值
/** This screen is no longer in front of the user.*/
void onPause();//当该界面不处于前台界面时调用,包括处于GONE或者该界面即将被remove掉
/** This screen is going to be in front of the user. */
void onResume();//相对于onPause()方法,当该界面不处于前台界面时调用,处于VISIBLE状态时调用
/** This view is going away; a hook to do cleanup. */
void cleanUp();//该界面即将被remove掉 ,即不在需要
}
2、KeyguardScreenCallback类 接口
功能:每个需要显示的界面:LockScreen或者UnLockScreen都保存了该对象的唯一实例,用来向控制界面汇报情况。
路径:frameworks\base\policy\src\com\android\internal\policy\impl\KeyguardScreenCallback.java
其源代码释义如下:
- /** Within a keyguard, there may be several screens that need a callback
- * to the host keyguard view.
- */
- public interface KeyguardScreenCallback extends KeyguardViewCallback {
- /** Transition to the lock screen*/
- void goToLockScreen(); //当前界面跳转为LockScreen ,而不是UnLockScreen
- /** Transition to the unlock screen.*/
- void goToUnlockScreen();//LockScreen成功开锁 ,是否需要显示UnLockScreen,否则,直接开锁成功。
- //忘记了开锁图案,即我们需要跳转到Google 账户去开锁。
- void forgotPattern(boolean isForgotten);
- boolean isSecure();//当前机器是否安全,例如:设置了图案、密码开锁等
- //该函数还不太懂,可能是是否只需要验证UnlockScreen界面,即可成功开锁。
- boolean isVerifyUnlockOnly();
- /**Stay on me, but recreate me (so I can use a different layout).*/
- void recreateMe(Configuration config); //重新根据手机当前状态,显示对应的Screen.
- /** Take action to send an emergency call. */
- void takeEmergencyCallAction(); //紧急呼叫时的处理行为.
- /** Report that the user had a failed attempt to unlock with password or pattern.*/
- void reportFailedUnlockAttempt(); //在UnLockScreen界面登陆失败时处理
- /** Report that the user successfully entered their password or pattern.*/
- void reportSuccessfulUnlockAttempt();//在UnLockScreen界面登陆成功时处理
- /** Report whether we there's another way to unlock the device.
- * @return true */
- boolean doesFallbackUnlockScreenExist();
- }
/** Within a keyguard, there may be several screens that need a callback
* to the host keyguard view.
*/
public interface KeyguardScreenCallback extends KeyguardViewCallback {
/** Transition to the lock screen*/
void goToLockScreen(); //当前界面跳转为LockScreen ,而不是UnLockScreen
/** Transition to the unlock screen.*/
void goToUnlockScreen();//LockScreen成功开锁 ,是否需要显示UnLockScreen,否则,直接开锁成功。
//忘记了开锁图案,即我们需要跳转到Google 账户去开锁。
void forgotPattern(boolean isForgotten);
boolean isSecure();//当前机器是否安全,例如:设置了图案、密码开锁等
//该函数还不太懂,可能是是否只需要验证UnlockScreen界面,即可成功开锁。
boolean isVerifyUnlockOnly();
/**Stay on me, but recreate me (so I can use a different layout).*/
void recreateMe(Configuration config); //重新根据手机当前状态,显示对应的Screen.
/** Take action to send an emergency call. */
void takeEmergencyCallAction(); //紧急呼叫时的处理行为.
/** Report that the user had a failed attempt to unlock with password or pattern.*/
void reportFailedUnlockAttempt(); //在UnLockScreen界面登陆失败时处理
/** Report that the user successfully entered their password or pattern.*/
void reportSuccessfulUnlockAttempt();//在UnLockScreen界面登陆成功时处理
/** Report whether we there's another way to unlock the device.
* @return true */
boolean doesFallbackUnlockScreenExist();
}
其唯一实现类位于LockPatternKeyguardView类的内部类(稍后讲到)。
3、KeyguardViewCallback类 接口
功能: 提供了一些接口用来接受用户操作Screen的结果。
路径:frameworks\base\policy\src\com\android\internal\policy\impl\KeyguardViewCallback.java
其源代码释义如下:
- /**
- * The callback used by the keyguard view to tell the {@link KeyguardViewMediator}
- * various things.
- */
- public interface KeyguardViewCallback {
- /** Request the wakelock to be poked for the default amount of time. */
- void pokeWakelock(); //保存屏幕在一定时间内处于亮屏状况 , 默认时间为5s或者10s
- /** Request the wakelock to be poked for a specific amount of time. */
- void pokeWakelock(int millis);//根据给定时间值,使屏幕在该事件段内保持亮屏状况
- /** Report that the keyguard is done.
- * @param authenticated Whether the user securely got past the keyguard.
- * the only reason for this to be false is if the keyguard was instructed
- * to appear temporarily to verify the user is supposed to get past the
- * keyguard, and the user fails to do so. */
- //成功的完成开锁,可以进入手机界面了。参数为ture表示是否正大光明的开锁,例如:图案正确,密码输入正确。
- void keyguardDone(boolean authenticated);
- /**Report that the keyguard is done drawing. */
- void keyguardDoneDrawing(); //整个锁屏界面draw()过程绘制完成时,回调该方法.
- }
/**
* The callback used by the keyguard view to tell the {@link KeyguardViewMediator}
* various things.
*/
public interface KeyguardViewCallback {
/** Request the wakelock to be poked for the default amount of time. */
void pokeWakelock(); //保存屏幕在一定时间内处于亮屏状况 , 默认时间为5s或者10s
/** Request the wakelock to be poked for a specific amount of time. */
void pokeWakelock(int millis);//根据给定时间值,使屏幕在该事件段内保持亮屏状况
/** Report that the keyguard is done.
* @param authenticated Whether the user securely got past the keyguard.
* the only reason for this to be false is if the keyguard was instructed
* to appear temporarily to verify the user is supposed to get past the
* keyguard, and the user fails to do so. */
//成功的完成开锁,可以进入手机界面了。参数为ture表示是否正大光明的开锁,例如:图案正确,密码输入正确。
void keyguardDone(boolean authenticated);
/**Report that the keyguard is done drawing. */
void keyguardDoneDrawing(); //整个锁屏界面draw()过程绘制完成时,回调该方法.
}
其唯一实现类是 KeyguardViewMediator类(稍后讲到)
4、 KeyguardWindowController类 接口
功能:提供通用 接口,判断该界面是否需要显示输入法窗口。
其源代码释义如下:
- /**
- * Interface passed to the keyguard view, for it to call up to control
- * its containing window.
- */
- public interface KeyguardWindowController {
- /** Control whether the window needs input -- that is if it has
- * text fields and thus should allow input method interaction. */
- void setNeedsInput(boolean needsInput); //是否需要显示输入法,为true表示需要。该方法可以想上层报到是否需要显示输入法窗口
- }
/**
* Interface passed to the keyguard view, for it to call up to control
* its containing window.
*/
public interface KeyguardWindowController {
/** Control whether the window needs input -- that is if it has
* text fields and thus should allow input method interaction. */
void setNeedsInput(boolean needsInput); //是否需要显示输入法,为true表示需要。该方法可以想上层报到是否需要显示输入法窗口
}
其唯一实现类是KeyguardViewManager类(稍后讲到)。
5、KeyguardViewManager类
功能:包装了WindowManager功能了,提供了添加、删除锁屏界面的功能。
其源代码释义如下:
- public class KeyguardViewManager implements KeyguardWindowController {
- ...
- private WindowManager.LayoutParams mWindowLayoutParams;
- private boolean mNeedsInput = false; //是否需要输入法 , 默认不需要
- private FrameLayout mKeyguardHost; //该ViewGroup作为顶层View,作为WindowManager添加至窗口
- private KeyguardViewBase mKeyguardView; //具体窗口内容。
- //以上两种的关系相当于DecorView和我们Activity内设置的资源文件一样
- private boolean mScreenOn = false; //是否处于亮屏状态
- //构造函数,初始化各种属性
- public KeyguardViewManager(Context context, ViewManager viewManager,
- KeyguardViewCallback callback, KeyguardViewProperties keyguardViewProperties, KeyguardUpdateMonitor updateMonitor) {
- ...
- }
- /**
- * Helper class to host the keyguard view.
- */
- private static class KeyguardViewHost extends FrameLayout {
- ... //KeyguardViewHost类
- }
- /**
- * Show the keyguard. Will handle creating and attaching to the view manager
- * lazily.
- */ //显示锁屏界面
- public synchronized void show() {
- if (mKeyguardHost == null) {
- ...
- mViewManager.addView(mKeyguardHost, lp);
- }
- if (mKeyguardView == null) {
- ...
- mKeyguardHost.addView(mKeyguardView, lp);
- if (mScreenOn) {
- mKeyguardView.onScreenTurnedOn();
- }
- }
- ...
- }
- ...
- /*** Hides the keyguard view */
- public synchronized void hide() { //隐藏锁屏界面,也就是说我们成功的解锁了
- if (mKeyguardHost != null) {
- mKeyguardHost.setVisibility(View.GONE);
- ...
- }
- }
- //锁屏界面是否处于显示状态
- public synchronized boolean isShowing() {
- return (mKeyguardHost != null && mKeyguardHost.getVisibility() == View.VISIBLE);
- }
- }
- }
public class KeyguardViewManager implements KeyguardWindowController {
...
private WindowManager.LayoutParams mWindowLayoutParams;
private boolean mNeedsInput = false; //是否需要输入法 , 默认不需要
private FrameLayout mKeyguardHost; //该ViewGroup作为顶层View,作为WindowManager添加至窗口
private KeyguardViewBase mKeyguardView; //具体窗口内容。
//以上两种的关系相当于DecorView和我们Activity内设置的资源文件一样
private boolean mScreenOn = false; //是否处于亮屏状态
//构造函数,初始化各种属性
public KeyguardViewManager(Context context, ViewManager viewManager,
KeyguardViewCallback callback, KeyguardViewProperties keyguardViewProperties, KeyguardUpdateMonitor updateMonitor) {
...
}
/**
* Helper class to host the keyguard view.
*/
private static class KeyguardViewHost extends FrameLayout {
... //KeyguardViewHost类
}
/**
* Show the keyguard. Will handle creating and attaching to the view manager
* lazily.
*/ //显示锁屏界面
public synchronized void show() {
if (mKeyguardHost == null) {
...
mViewManager.addView(mKeyguardHost, lp);
}
if (mKeyguardView == null) {
...
mKeyguardHost.addView(mKeyguardView, lp);
if (mScreenOn) {
mKeyguardView.onScreenTurnedOn();
}
}
...
}
...
/*** Hides the keyguard view */
public synchronized void hide() { //隐藏锁屏界面,也就是说我们成功的解锁了
if (mKeyguardHost != null) {
mKeyguardHost.setVisibility(View.GONE);
...
}
}
//锁屏界面是否处于显示状态
public synchronized boolean isShowing() {
return (mKeyguardHost != null && mKeyguardHost.getVisibility() == View.VISIBLE);
}
}
}
6、 KeyguardUpdateMonitor.java类
功能:该类的主要功能就是根据监视系统状态值的改变(例如:时间、SIM卡状态、电池电量;使用广播监听),根据这种状态
值的改变回调监听了该状态信息的对象实例。
其源代码释义如下:
- public class KeyguardUpdateMonitor {
- ...
- private int mFailedAttempts = 0; //当前登录事,已经失败的次数
- private ArrayList<InfoCallback> mInfoCallbacks; //保存所有监听对象 InfoCallback
- private ArrayList<SimStateCallback> mSimStateCallbacks ; //保存所有监听对象 SimStateCallback
- private static class SimArgs { //Sim状态信息
- ...
- }
- /**
- * Callback for general information relevant to lock screen.
- */
- interface InfoCallback {
- //电池电量信息改变:参数含义分别如下:是否显示电量信息 、 是否插入电影充电、 当前电池电量值
- void onRefreshBatteryInfo(boolean showBatteryInfo, boolean pluggedIn, int batteryLevel);
- void onTimeChanged(); //时间发生了改变
- //网络运营商状态发生了改变 ,例如从中国移动2G变为中国移动3G,或者无服务等 ;
- void onRefreshCarrierInfo(CharSequence plmn, CharSequence spn);
- /** Called when the ringer mode changes. */
- void onRingerModeChanged(int state);
- /** 电话状态发生了改变 值可能为:EXTRA_STATE_IDLE、EXTRA_STATE_RINGING、EXTRA_STATE_OFFHOOK*/
- void onPhoneStateChanged(String newState);
- }
- /** Callback to notify of sim state change. */
- interface SimStateCallback {
- void onSimStateChanged(IccCard.State simState); //Sim卡信息发生了改变,例如有正常状况变为ABSENT/MISSING状态
- }
- /*** Register to receive notifications about general keyguard information
- * (see {@link InfoCallback}. */
- public void registerInfoCallback(InfoCallback callback) {
- if (!mInfoCallbacks.contains(callback)) {
- mInfoCallbacks.add(callback); //注册一个监听器
- } ...
- }
- ...
- }
public class KeyguardUpdateMonitor {
...
private int mFailedAttempts = 0; //当前登录事,已经失败的次数
private ArrayList<InfoCallback> mInfoCallbacks; //保存所有监听对象 InfoCallback
private ArrayList<SimStateCallback> mSimStateCallbacks ; //保存所有监听对象 SimStateCallback
private static class SimArgs { //Sim状态信息
...
}
/**
* Callback for general information relevant to lock screen.
*/
interface InfoCallback {
//电池电量信息改变:参数含义分别如下:是否显示电量信息 、 是否插入电影充电、 当前电池电量值
void onRefreshBatteryInfo(boolean showBatteryInfo, boolean pluggedIn, int batteryLevel);
void onTimeChanged(); //时间发生了改变
//网络运营商状态发生了改变 ,例如从中国移动2G变为中国移动3G,或者无服务等 ;
void onRefreshCarrierInfo(CharSequence plmn, CharSequence spn);
/** Called when the ringer mode changes. */
void onRingerModeChanged(int state);
/** 电话状态发生了改变 值可能为:EXTRA_STATE_IDLE、EXTRA_STATE_RINGING、EXTRA_STATE_OFFHOOK*/
void onPhoneStateChanged(String newState);
}
/** Callback to notify of sim state change. */
interface SimStateCallback {
void onSimStateChanged(IccCard.State simState); //Sim卡信息发生了改变,例如有正常状况变为ABSENT/MISSING状态
}
/*** Register to receive notifications about general keyguard information
* (see {@link InfoCallback}. */
public void registerInfoCallback(InfoCallback callback) {
if (!mInfoCallbacks.contains(callback)) {
mInfoCallbacks.add(callback); //注册一个监听器
} ...
}
...
}
功能:作为LockScreen和UnLockScreen界面的载体,控制显示哪个界面。
其源代码释义如下:
- public class LockPatternKeyguardView extends KeyguardViewBase {
- ...
- private View mLockScreen;
- private View mUnlockScreen;
- private boolean mScreenOn = false;//是否亮屏
- enum Mode {
- //当前显示界面的Mode Lock 或者UnLock
- }
- enum UnlockMode {
- ...//开锁界面的几种不同Mode
- }
- //构造函数
- public LockPatternKeyguardView( ...) {
- //KeyguardScreenCallback的实现对象
- mKeyguardScreenCallback = new KeyguardScreenCallback() {
- ...
- };
- ...
- }
- public void reset() {
- ...//重置显示界面
- }
- private void recreateLockScreen() {
- ...//重新构建LockScreen
- }
- private void recreateUnlockScreen() {
- ...//重新构建UnlockScreen
- }
- private void recreateScreens() {
- ...//重新构建该视图
- }
- public void verifyUnlock() {
- ...
- }
- public void cleanUp() {
- ... //清理资源对象
- }
- private boolean isSecure() {
- ...//手机设置是否处于安全状态
- }
- private void updateScreen(final Mode mode) {
- ...//根据参数(Lock/unLock),判断显示为LockScreen或者UnlockScreen界面
- }
- View createLockScreen() {
- ...//创建lockScreen
- }
- View createUnlockScreenFor(UnlockMode unlockMode) {
- ...//根据不同的Unlock Mode , 创建不同的UnlockScreen
- }
- private Mode getInitialMode() {
- ...//得到初始化的状态Mode (lock or unlock).
- }
- /** Given the current state of things, what should the unlock screen be? */
- private UnlockMode getUnlockMode() {
- ...//返回开锁的状态Unlock Mode
- }
- private void showTimeoutDialog() {
- ... //输入密码超过一定次数时,提示30s后在登录的对话框
- }
- private void showAlmostAtAccountLoginDialog() {
- ... //显示Google 账户登录对话框
- }
- }
public class LockPatternKeyguardView extends KeyguardViewBase {
...
private View mLockScreen;
private View mUnlockScreen;
private boolean mScreenOn = false;//是否亮屏
enum Mode {
//当前显示界面的Mode Lock 或者UnLock
}
enum UnlockMode {
...//开锁界面的几种不同Mode
}
//构造函数
public LockPatternKeyguardView( ...) {
//KeyguardScreenCallback的实现对象
mKeyguardScreenCallback = new KeyguardScreenCallback() {
...
};
...
}
public void reset() {
...//重置显示界面
}
private void recreateLockScreen() {
...//重新构建LockScreen
}
private void recreateUnlockScreen() {
...//重新构建UnlockScreen
}
private void recreateScreens() {
...//重新构建该视图
}
public void verifyUnlock() {
...
}
public void cleanUp() {
... //清理资源对象
}
private boolean isSecure() {
...//手机设置是否处于安全状态
}
private void updateScreen(final Mode mode) {
...//根据参数(Lock/unLock),判断显示为LockScreen或者UnlockScreen界面
}
View createLockScreen() {
...//创建lockScreen
}
View createUnlockScreenFor(UnlockMode unlockMode) {
...//根据不同的Unlock Mode , 创建不同的UnlockScreen
}
private Mode getInitialMode() {
...//得到初始化的状态Mode (lock or unlock).
}
/** Given the current state of things, what should the unlock screen be? */
private UnlockMode getUnlockMode() {
...//返回开锁的状态Unlock Mode
}
private void showTimeoutDialog() {
... //输入密码超过一定次数时,提示30s后在登录的对话框
}
private void showAlmostAtAccountLoginDialog() {
... //显示Google 账户登录对话框
}
}
8、KeyguardViewBase类 抽象类 (自定义ViewGroup)
功能:为LockPatternKeyguardView提供了一组通用的方法 。需要值得注意的方法就是他对某些KeyEvent的监听,
当他消费监听到这些KeyEvent,我们的App就监听不到这些KeyEvent了 。常用的有KEYEVENT_VOLUME_UP/DOWN等。
- public abstract class KeyguardViewBase extends FrameLayout {
- ...
- @Override
- public boolean dispatchKeyEvent(KeyEvent event) {
- ...
- if (interceptMediaKey(event)) {
- return true;
- }
- return super.dispatchKeyEvent(event);
- }
- private boolean interceptMediaKey(KeyEvent event) {
- final int keyCode = event.getKeyCode();
- if (event.getAction() == KeyEvent.ACTION_DOWN) {
- switch (keyCode) {
- ...//more keyevent
- case KeyEvent.KEYCODE_VOLUME_UP:
- case KeyEvent.KEYCODE_VOLUME_DOWN: {
- ...
- // Don't execute default volume behavior
- return true; //直接返回不在向下传递处理
- }
- }
- }
- return false;
- }
- }
public abstract class KeyguardViewBase extends FrameLayout {
...
@Override
public boolean dispatchKeyEvent(KeyEvent event) {
...
if (interceptMediaKey(event)) {
return true;
}
return super.dispatchKeyEvent(event);
}
private boolean interceptMediaKey(KeyEvent event) {
final int keyCode = event.getKeyCode();
if (event.getAction() == KeyEvent.ACTION_DOWN) {
switch (keyCode) {
...//more keyevent
case KeyEvent.KEYCODE_VOLUME_UP:
case KeyEvent.KEYCODE_VOLUME_DOWN: {
...
// Don't execute default volume behavior
return true; //直接返回不在向下传递处理
}
}
}
return false;
}
}
9、 KeyguardViewProperties.java 接口
功能:提供了创建界面的通用方法。
- public interface KeyguardViewProperties {
- //创建一个KeyguardViewBase实例 , 实际是指LockPatternKeyguardView实例
- KeyguardViewBase createKeyguardView(Context context,
- KeyguardUpdateMonitor updateMonitor,
- KeyguardWindowController controller);
- boolean isSecure();
- }
public interface KeyguardViewProperties {
//创建一个KeyguardViewBase实例 , 实际是指LockPatternKeyguardView实例
KeyguardViewBase createKeyguardView(Context context,
KeyguardUpdateMonitor updateMonitor,
KeyguardWindowController controller);
boolean isSecure();
}
其唯一实现类是是LockPatternKeyguardViewProperties类(稍后讲到)。
10、LockPatternKeyguardViewProperties类
源代码释义如下:
- public class LockPatternKeyguardViewProperties implements KeyguardViewProperties {
- ...
- //创建一个LockPatternKeyguardView对象
- public KeyguardViewBase createKeyguardView(Context context,
- KeyguardUpdateMonitor updateMonitor,
- KeyguardWindowController controller) {
- return new LockPatternKeyguardView(context, updateMonitor,
- mLockPatternUtils, controller);
- }
public class LockPatternKeyguardViewProperties implements KeyguardViewProperties {
...
//创建一个LockPatternKeyguardView对象
public KeyguardViewBase createKeyguardView(Context context,
KeyguardUpdateMonitor updateMonitor,
KeyguardWindowController controller) {
return new LockPatternKeyguardView(context, updateMonitor,
mLockPatternUtils, controller);
}
}
//=============================================
// OK ,我知道你看的很纠结了,具体需要时参考源代码看是最明智的。
//=============================================
我知道代码贴的太多了,没办法,谁让它理解起来就那么费劲呢 ? 你可别犯愁,真正核心的类可还没出来。。
12、KeyguardViewMediator核心类 ,该类是唯一实现了KeyguardViewCallback的类。
功能: 功能:该类提供了一些接口,由PhoneWindowManager)去访问控制Keyguard....
该类的初始化是在PolicyWindowManager的构造函数中创建的。如下:
- public class PhoneWindowManager implements WindowManagerPolicy {
- ...
- /** {@inheritDoc} */ //由SystemServer调用
- public void init(Context context, IWindowManager windowManager,
- LocalPowerManager powerManager) {
- ...//初始化该实例
- mKeyguardMediator = new KeyguardViewMediator(context, this, powerManager);
- }
- }
public class PhoneWindowManager implements WindowManagerPolicy {
...
/** {@inheritDoc} */ //由SystemServer调用
public void init(Context context, IWindowManager windowManager,
LocalPowerManager powerManager) {
...//初始化该实例
mKeyguardMediator = new KeyguardViewMediator(context, this, powerManager);
}
}
参照源代码,把一些重要的属性和方法的大意给分析下:
- public class KeyguardViewMediator implements KeyguardViewCallback, KeyguardUpdateMonitor.SimStateCallback {
- private boolean mSystemReady; //启动成功 由SystemServer调用
- /**Used to keep the device awake while to ensure the keyguard finishes opening before
- * we sleep.*/ //在需要显示锁屏界面时,保持屏幕在某个时间段内为暗屏状态
- private PowerManager.WakeLock mShowKeyguardWakeLock;
- private KeyguardViewManager mKeyguardViewManager; //KeyguardViewManager实例
- /** * External apps (like the phone app) can tell us to disable the keygaurd.*/
- //是否允许其他App禁止锁屏 , 例如来电时 禁止锁屏
- private boolean mExternallyEnabled = true;
- //处于锁屏状态 , 即显示锁屏
- private boolean mShowing = false;
- // true if the keyguard is hidden by another window
- private boolean mHidden = false; //被其他窗口掩盖 , 例如来电时锁屏被掩盖
- private boolean mScreenOn = false; // 是否亮屏
- public KeyguardViewMediator(Context context, PhoneWindowManager callback,
- LocalPowerManager powerManager) {
- ...
- //构造相关实例对象
- mKeyguardViewProperties = new LockPatternKeyguardViewProperties(
- new LockPatternUtils(mContext), mUpdateMonitor);
- mKeyguardViewManager = new KeyguardViewManager(
- context, WindowManagerImpl.getDefault(), this,
- mKeyguardViewProperties, mUpdateMonitor);
- //解锁成功后发送的Intent
- mUserPresentIntent = new Intent(Intent.ACTION_USER_PRESENT);
- mUserPresentIntent.addFlags(Intent.FLAG_RECEIVER_REPLACE_PENDING);
- }
- /** Called to let us know the screen was turned off.
- * @param why either {@link WindowManagerPolicy#OFF_BECAUSE_OF_USER},
- * {@link WindowManagerPolicy#OFF_BECAUSE_OF_TIMEOUT} or
- * {@link WindowManagerPolicy#OFF_BECAUSE_OF_PROX_SENSOR}.
- */
- //屏幕变灰暗 , 原因有如下:以及对应的逻辑处理。
- // 1、OFF_BECAUSE_OF_USER : 用户按下POWER键 , 当前是否处于锁屏界面,若是(mShowing)则重置显示界面,否则重新显示锁屏界面
- // 2、OFF_BECAUSE_OF_TIMEOUT : 屏幕超时,常见情况就是一段时间没有操作屏幕,手机处于灰暗状态。 处理行为:
- // 发送Action值为DELAYED_KEYGUARD_ACTION的广播,因为该类注册了该Intent广播,接受到时会调用doKeyguard()方法锁屏
- // 3、OFF_BECAUSE_OF_PROX_SENSOR:接打电话时,距离感应太近导致暗屏,此时由于PowerManager那儿已经处理了暗屏,不需要做任何事
- // 最后,如果以上逻辑都不成立,调用 doKeyguard()方法显示屏幕
- public void onScreenTurnedOff(int why) {
- ...
- }
- /**
- * Let's us know the screen was turned on.
- */
- public void onScreenTurnedOn() {
- synchronized (this) {
- ...
- notifyScreenOnLocked(); //通知亮屏
- }
- }
- /** Enable the keyguard if the settings are appropriate. */
- private void doKeyguard() {
- synchronized (this) {
- ...
- showLocked();//显示锁屏界面
- }
- }
- //该方法的调用时机就是当按下POWER键时,系统会回调该方法 keyCode值一般为 26
- public boolean onWakeKeyWhenKeyguardShowingTq(int keyCode) {
- //操作按键是否能唤醒屏幕
- if (isWakeKeyWhenKeyguardShowing(keyCode)) {
- // give the keyguard view manager a chance to adjust the state of the
- // keyguard based on the key that woke the device before poking
- // the wake lock
- wakeWhenReadyLocked(keyCode);//开始唤醒屏幕咯
- return true;
- } else {
- return false;
- }
- }
- /** {@inheritDoc} */ //在一定时间内保存屏幕为亮屏状态
- public void pokeWakelock(int holdMs) {
- ...
- }
- //表示成功得分完成了解锁操作
- public void keyguardDone(boolean authenticated, boolean wakeup) {
- synchronized (this) {
- //发送给Handler 进行异步处理
- Message msg = mHandler.obtainMessage(KEYGUARD_DONE);
- msg.arg1 = wakeup ? 1 : 0;
- mHandler.sendMessage(msg);
- if (authenticated) {
- mUpdateMonitor.clearFailedAttempts(); //清除错误登录次数
- }
- ...
- }
- }
- //Handler对象 , 异步处理
- private Handler mHandler = new Handler() {
- @Override
- public void handleMessage(Message msg) {
- switch (msg.what) {
- ... //异步处理
- }
- }
- };
- //异步处理完成开锁成功
- private void handleKeyguardDone(boolean wakeup) {
- handleHide(); //释放该Keyguard对应的窗口
- mWakeLock.release();
- mContext.sendBroadcast(mUserPresentIntent); //解锁成功,发送Intent信息
- }
- //显示锁屏界面
- private void handleShow() {
- synchronized (KeyguardViewMediator.this) {
- ...
- mKeyguardViewManager.show();
- mShowing = true;
- ...
- }
- }
- private void handleHide() {
- synchronized (KeyguardViewMediator.this) {
- //去除锁屏界面对应的窗口
- mKeyguardViewManager.hide();
- mShowing = false;
- ...
- }
- }
- //设置状态栏enable状态 , 例如:能否被下拉等
- private void adjustStatusBarLocked() {
- ...
- // if the keyguard is shown, allow the status bar to open
- // only if the keyguard is insecure and is covered by another window
- boolean enable = !mShowing || (mHidden && !isSecure());
- mStatusBarManager.disable(enable ?StatusBarManager.DISABLE_NONE : StatusBarManager.DISABLE_EXPAND);
- }
- }
- }
public class KeyguardViewMediator implements KeyguardViewCallback, KeyguardUpdateMonitor.SimStateCallback {
private boolean mSystemReady; //启动成功 由SystemServer调用
/**Used to keep the device awake while to ensure the keyguard finishes opening before
* we sleep.*/ //在需要显示锁屏界面时,保持屏幕在某个时间段内为暗屏状态
private PowerManager.WakeLock mShowKeyguardWakeLock;
private KeyguardViewManager mKeyguardViewManager; //KeyguardViewManager实例
/** * External apps (like the phone app) can tell us to disable the keygaurd.*/
//是否允许其他App禁止锁屏 , 例如来电时 禁止锁屏
private boolean mExternallyEnabled = true;
//处于锁屏状态 , 即显示锁屏
private boolean mShowing = false;
// true if the keyguard is hidden by another window
private boolean mHidden = false; //被其他窗口掩盖 , 例如来电时锁屏被掩盖
private boolean mScreenOn = false; // 是否亮屏
public KeyguardViewMediator(Context context, PhoneWindowManager callback,
LocalPowerManager powerManager) {
...
//构造相关实例对象
mKeyguardViewProperties = new LockPatternKeyguardViewProperties(
new LockPatternUtils(mContext), mUpdateMonitor);
mKeyguardViewManager = new KeyguardViewManager(
context, WindowManagerImpl.getDefault(), this,
mKeyguardViewProperties, mUpdateMonitor);
//解锁成功后发送的Intent
mUserPresentIntent = new Intent(Intent.ACTION_USER_PRESENT);
mUserPresentIntent.addFlags(Intent.FLAG_RECEIVER_REPLACE_PENDING);
}
/** Called to let us know the screen was turned off.
* @param why either {@link WindowManagerPolicy#OFF_BECAUSE_OF_USER},
* {@link WindowManagerPolicy#OFF_BECAUSE_OF_TIMEOUT} or
* {@link WindowManagerPolicy#OFF_BECAUSE_OF_PROX_SENSOR}.
*/
//屏幕变灰暗 , 原因有如下:以及对应的逻辑处理。
// 1、OFF_BECAUSE_OF_USER : 用户按下POWER键 , 当前是否处于锁屏界面,若是(mShowing)则重置显示界面,否则重新显示锁屏界面
// 2、OFF_BECAUSE_OF_TIMEOUT : 屏幕超时,常见情况就是一段时间没有操作屏幕,手机处于灰暗状态。 处理行为:
// 发送Action值为DELAYED_KEYGUARD_ACTION的广播,因为该类注册了该Intent广播,接受到时会调用doKeyguard()方法锁屏
// 3、OFF_BECAUSE_OF_PROX_SENSOR:接打电话时,距离感应太近导致暗屏,此时由于PowerManager那儿已经处理了暗屏,不需要做任何事
// 最后,如果以上逻辑都不成立,调用 doKeyguard()方法显示屏幕
public void onScreenTurnedOff(int why) {
...
}
/**
* Let's us know the screen was turned on.
*/
public void onScreenTurnedOn() {
synchronized (this) {
...
notifyScreenOnLocked(); //通知亮屏
}
}
/** Enable the keyguard if the settings are appropriate. */
private void doKeyguard() {
synchronized (this) {
...
showLocked();//显示锁屏界面
}
}
//该方法的调用时机就是当按下POWER键时,系统会回调该方法 keyCode值一般为 26
public boolean onWakeKeyWhenKeyguardShowingTq(int keyCode) {
//操作按键是否能唤醒屏幕
if (isWakeKeyWhenKeyguardShowing(keyCode)) {
// give the keyguard view manager a chance to adjust the state of the
// keyguard based on the key that woke the device before poking
// the wake lock
wakeWhenReadyLocked(keyCode);//开始唤醒屏幕咯
return true;
} else {
return false;
}
}
/** {@inheritDoc} */ //在一定时间内保存屏幕为亮屏状态
public void pokeWakelock(int holdMs) {
...
}
//表示成功得分完成了解锁操作
public void keyguardDone(boolean authenticated, boolean wakeup) {
synchronized (this) {
//发送给Handler 进行异步处理
Message msg = mHandler.obtainMessage(KEYGUARD_DONE);
msg.arg1 = wakeup ? 1 : 0;
mHandler.sendMessage(msg);
if (authenticated) {
mUpdateMonitor.clearFailedAttempts(); //清除错误登录次数
}
...
}
}
//Handler对象 , 异步处理
private Handler mHandler = new Handler() {
@Override
public void handleMessage(Message msg) {
switch (msg.what) {
... //异步处理
}
}
};
//异步处理完成开锁成功
private void handleKeyguardDone(boolean wakeup) {
handleHide(); //释放该Keyguard对应的窗口
mWakeLock.release();
mContext.sendBroadcast(mUserPresentIntent); //解锁成功,发送Intent信息
}
//显示锁屏界面
private void handleShow() {
synchronized (KeyguardViewMediator.this) {
...
mKeyguardViewManager.show();
mShowing = true;
...
}
}
private void handleHide() {
synchronized (KeyguardViewMediator.this) {
//去除锁屏界面对应的窗口
mKeyguardViewManager.hide();
mShowing = false;
...
}
}
//设置状态栏enable状态 , 例如:能否被下拉等
private void adjustStatusBarLocked() {
...
// if the keyguard is shown, allow the status bar to open
// only if the keyguard is insecure and is covered by another window
boolean enable = !mShowing || (mHidden && !isSecure());
mStatusBarManager.disable(enable ?StatusBarManager.DISABLE_NONE : StatusBarManager.DISABLE_EXPAND);
}
}
}
该类的很多方法都是由PhoneWindowManager调用访问的。
基本上把一些重要的类及其相关的方法给走了一遍吧,对看源码的还是很有帮助的。因为我的理解还不是很深入,可能有偏颇的
地方。希望以后能够组件完善起来。 阿门 !
问题:如何在框架中, 解除锁屏 ?
引入:该问题是在CSDN论坛上回答一位网友引发的,最开始由于我也只是简单看了下,因此也就事论事回答了一个小问题。
随着看的越来越深入,慢慢的也在心里长生了涟漪。经过尝试、烧鸡验证,发现如下办法行的通,而且效果还比较好。风险应该
比较小吧。 希望正在在框架修改的同学,慎重行事。
基本思路:毫无疑问,我的想法就是每次需要显示Keyguard---锁屏界面时,我们并不真正的去锁屏,而只是提供了一个空的
方法去给系统调用,让系统觉得我们“锁屏”了,同样也不去真正的隐藏“锁屏”界面,提供一个空壳给系统调用。由于可能涉及
到其它问题,例如:能否下拉状态栏,按下POWER键后,屏幕很快休眠等。Come on ,我们需要统一做处理。
所有步骤函数都发生在KeyguardViewMediator 类中,注释部分为我们所添加的。
Step 1、 取消 真正的去锁屏实现
- //该方法会显示锁屏界面,我们使其成为一个空壳子
- private void handleShow() {
- synchronized (KeyguardViewMediator.this) {
- if (DEBUG) Log.d(TAG, "handleShow");
- if (!mSystemReady) return;
- playSounds(true);
- //Begin : Modifid by qinjuning
- //mKeyguardViewManager.show(); //
- //mShowing = true; //
- //adjustUserActivityLocked(); //
- //adjustStatusBarLocked(); //取消对状态栏的控制
- //End
- try {
- ActivityManagerNative.getDefault().closeSystemDialogs("lock");
- } catch (RemoteException e) {
- }
- mShowKeyguardWakeLock.release();
- }
- }
//该方法会显示锁屏界面,我们使其成为一个空壳子
private void handleShow() {
synchronized (KeyguardViewMediator.this) {
if (DEBUG) Log.d(TAG, "handleShow");
if (!mSystemReady) return;
playSounds(true);
//Begin : Modifid by qinjuning
//mKeyguardViewManager.show(); //
//mShowing = true; //
//adjustUserActivityLocked(); //
//adjustStatusBarLocked(); //取消对状态栏的控制
//End
try {
ActivityManagerNative.getDefault().closeSystemDialogs("lock");
} catch (RemoteException e) {
}
mShowKeyguardWakeLock.release();
}
}
Step 2、 取消 真正的去隐藏锁屏实现
- //真正的隐藏屏幕实现
- private void handleHide() {
- synchronized (KeyguardViewMediator.this) {
- if (DEBUG) Log.d(TAG, "handleHide");
- if (mWakeAndHandOff.isHeld()) {
- Log.w(TAG, "attempt to hide the keyguard while waking, ignored");
- return;
- }
- // only play "unlock" noises if not on a call (since the incall UI
- // disables the keyguard)
- if (TelephonyManager.EXTRA_STATE_IDLE.equals(mPhoneState)) {
- playSounds(false);
- }
- //Begin : Modifid by qinjuning
- //mKeyguardViewManager.hide();
- //mShowing = false;
- //adjustUserActivityLocked();
- //adjustStatusBarLocked(); //取消对状态栏的控制
- //End
- }
- }
//真正的隐藏屏幕实现
private void handleHide() {
synchronized (KeyguardViewMediator.this) {
if (DEBUG) Log.d(TAG, "handleHide");
if (mWakeAndHandOff.isHeld()) {
Log.w(TAG, "attempt to hide the keyguard while waking, ignored");
return;
}
// only play "unlock" noises if not on a call (since the incall UI
// disables the keyguard)
if (TelephonyManager.EXTRA_STATE_IDLE.equals(mPhoneState)) {
playSounds(false);
}
//Begin : Modifid by qinjuning
//mKeyguardViewManager.hide();
//mShowing = false;
//adjustUserActivityLocked();
//adjustStatusBarLocked(); //取消对状态栏的控制
//End
}
}
以上两步行动后,存在一个Bug(问题),就是唤醒屏幕后,会在指定的时间内屏幕由亮变暗,我们还需要做如下修改
Step 3、按下POWER键时, 解除屏幕由亮变暗的Bug
- private void handleWakeWhenReady(int keyCode) {
- synchronized (KeyguardViewMediator.this) {
- if (DBG_WAKE) Log.d(TAG, "handleWakeWhenReady(" + keyCode + ")");
- // this should result in a call to 'poke wakelock' which will set a timeout
- // on releasing the wakelock
- if (!mKeyguardViewManager.wakeWhenReadyTq(keyCode)) {
- // poke wakelock ourselves if keyguard is no longer active
- Log.w(TAG, "mKeyguardViewManager.wakeWhenReadyTq did not poke wake lock, so poke it ourselves");
- //Begin : Modifid by qinjuning
- //pokeWakelock(); //按下POWER键时, 解除屏幕由亮变暗的Bug
- //End
- }
- /**
- * Now that the keyguard is ready and has poked the wake lock, we can
- * release the handoff wakelock
- */
- mWakeAndHandOff.release();
- if (!mWakeLock.isHeld()) {
- Log.w(TAG, "mWakeLock not held in mKeyguardViewManager.wakeWhenReadyTq");
- }
- }
- }
private void handleWakeWhenReady(int keyCode) {
synchronized (KeyguardViewMediator.this) {
if (DBG_WAKE) Log.d(TAG, "handleWakeWhenReady(" + keyCode + ")");
// this should result in a call to 'poke wakelock' which will set a timeout
// on releasing the wakelock
if (!mKeyguardViewManager.wakeWhenReadyTq(keyCode)) {
// poke wakelock ourselves if keyguard is no longer active
Log.w(TAG, "mKeyguardViewManager.wakeWhenReadyTq did not poke wake lock, so poke it ourselves");
//Begin : Modifid by qinjuning
//pokeWakelock(); //按下POWER键时, 解除屏幕由亮变暗的Bug
//End
}
/**
* Now that the keyguard is ready and has poked the wake lock, we can
* release the handoff wakelock
*/
mWakeAndHandOff.release();
if (!mWakeLock.isHeld()) {
Log.w(TAG, "mWakeLock not held in mKeyguardViewManager.wakeWhenReadyTq");
}
}
}
经过真机测试是通过的,但其他风险并不清楚。 这个方法只是提供了一个学习的途径吧。大家慎重行事。
上面Step 1、以及Step 2可以由如下方法代替:
将属性mExternallyEnabled 设置为 false, 接下来需要显示界面时都不会继续走下去,如下函数:
- /**
- * Enable the keyguard if the settings are appropriate.
- */ //显示界面
- private void doKeyguard() {
- synchronized (this) {
- // if another app is disabling us, don't show
- if (!mExternallyEnabled) { //mExternallyEnabled 为false
- if (DEBUG) Log.d(TAG, "doKeyguard: not showing because externally disabled");
- // note: we *should* set mNeedToReshowWhenReenabled=true here, but that makes
- // for an occasional ugly flicker in this situation:
- // 1) receive a call with the screen on (no keyguard) or make a call
- // 2) screen times out
- // 3) user hits key to turn screen back on
- // instead, we reenable the keyguard when we know the screen is off and the call
- // ends (see the broadcast receiver below)
- // TODO: clean this up when we have better support at the window manager level
- // for apps that wish to be on top of the keyguard
- return;
- }
- ...
- }
- }
/**
* Enable the keyguard if the settings are appropriate.
*/ //显示界面
private void doKeyguard() {
synchronized (this) {
// if another app is disabling us, don't show
if (!mExternallyEnabled) { //mExternallyEnabled 为false
if (DEBUG) Log.d(TAG, "doKeyguard: not showing because externally disabled");
// note: we *should* set mNeedToReshowWhenReenabled=true here, but that makes
// for an occasional ugly flicker in this situation:
// 1) receive a call with the screen on (no keyguard) or make a call
// 2) screen times out
// 3) user hits key to turn screen back on
// instead, we reenable the keyguard when we know the screen is off and the call
// ends (see the broadcast receiver below)
// TODO: clean this up when we have better support at the window manager level
// for apps that wish to be on top of the keyguard
return;
}
...
}
}
该方法的一个缺点就是,假如存在重新调用了setKeyguardEnabled()设置该值,一切都是白搭( 但从源码看,这点不可能
出现,因为存在另一个判断依据:变量mNeedToReshowWhenReenabled , 其初始值为false,只有成功禁止锁屏之后才置为
true )。 因此,我们可以仿照这个方法,主动添加一个私有变量,禁止显示锁屏界面,即禁止doKeyguard()方法继续走下去。
OK ,本文到此为止。讲的比较抽象。 大家看代码时多加理解才是王道 。
显然易见,手机厂商,基于框架只需要修改LockScreen这个自定义ViewGroup即可,其他的一套Google已经为我们
封装好了。
在框架层修改肯定不是最好的,对于第三方的App而言,实现不了该功能。还好,SDK为我们提供了接口类去处理隐藏锁屏接口
的方法,该类是KeyguardManager类,关于该类的简介请参考该博客:
我们可以通过KeyguardManager类实例获得一个KeyguardManager.KeyguardLock对象,进而调用相应方法去取消锁屏界面
和显示锁屏界面。
KeyguardManager.KeyguardLock的两个方法说明如下:
public void disableKeyguard ()
功能:取消锁屏界面显示,同时禁止显示锁屏界面。除非你显示调用了reenableKeyguard()方法使能显示锁屏界面。
public void reenableKeyguard ()
功能: 使能显示锁屏界面,如果你之前调用了disableKeyguard()方法取消锁屏界面,那么会马上显示锁屏界面。
这两个方法最终都会调用到KeyguardViewMediator类的setKeyguardEnabled(boolean enable)方法。
参数说明: enable = false 对应于disableKeyguard()方法,
enable = true 对应于reenableKeyguard()方法。
该方法原型为: 位于KeyguardViewMediator类中
- /**
- * Same semantics as {@link WindowManagerPolicy#enableKeyguard}; provide
- * a way for external stuff to override normal keyguard behavior. For instance
- * the phone app disables the keyguard when it receives incoming calls.
- */
- public void setKeyguardEnabled(boolean enabled) {
- synchronized (this) {
- mExternallyEnabled = enabled; //保存值,该值会在doKeyguard()时用到,如果为false ,则不进行锁屏
- if (!enabled && mShowing) {
- if (mExitSecureCallback != null) {//该判断为false
- ...
- return ;
- }
- mNeedToReshowWhenReenabled = true; //置为真,以便下次调用
- hideLocked(); //已经显示了锁屏界面,则取消隐藏界面
- } else if (enabled && mNeedToReshowWhenReenabled) { //重新显示锁屏界面
- mNeedToReshowWhenReenabled = false;
- if (mExitSecureCallback != null) {//该判断为false
- } else {
- showLocked(); //显示隐藏界面
- ...
- }
- }
- }
- }
/**
* Same semantics as {@link WindowManagerPolicy#enableKeyguard}; provide
* a way for external stuff to override normal keyguard behavior. For instance
* the phone app disables the keyguard when it receives incoming calls.
*/
public void setKeyguardEnabled(boolean enabled) {
synchronized (this) {
mExternallyEnabled = enabled; //保存值,该值会在doKeyguard()时用到,如果为false ,则不进行锁屏
if (!enabled && mShowing) {
if (mExitSecureCallback != null) {//该判断为false
...
return ;
}
mNeedToReshowWhenReenabled = true; //置为真,以便下次调用
hideLocked(); //已经显示了锁屏界面,则取消隐藏界面
} else if (enabled && mNeedToReshowWhenReenabled) { //重新显示锁屏界面
mNeedToReshowWhenReenabled = false;
if (mExitSecureCallback != null) {//该判断为false
} else {
showLocked(); //显示隐藏界面
...
}
}
}
}
使用这两个方法时,记得加上如下权限:android.permission.DISABLE_KEYGUARD
为了在亮屏时,达到取消显示界面的效果,我们还需要知道 一下两个广播:
屏幕变暗以及屏幕点亮的广播
android.intent.action.SCREEN_ON --- 屏幕变亮
android.intent.action.SCREEN_OFF ---- 屏幕点暗
关于这两个广播的说明请参考如下博客:http://www.2cto.com/kf/201111/109815.html
于是在监听到屏幕变暗/变亮时,通过KeyguardManager 类实现即可。对与用户而言,就相当于解除了锁屏界面了。
可能代码如下:
- //屏幕变暗/变亮的广播 , 我们要调用KeyguardManager类相应方法去解除屏幕锁定
- private BroadcastReceiver mScreenOffReceiver = new BroadcastReceiver(){
- @Override
- public void onReceive(Context context , Intent intent) {
- String action = intent.getAction() ;
- Log.i(TAG, intent.toString());
- if(action.equals("android.intent.action.SCREEN_OFF")
- || action.equals("android.intent.action.SCREEN_ON") ){
- mKeyguardManager = (KeyguardManager)context.getSystemService(Context.KEYGUARD_SERVICE);
- mKeyguardLock = mKeyguardManager.newKeyguardLock("zdLock 1");
- mKeyguardLock.disableKeyguard();
- startActivity(zdLockIntent);
- }
- }
- };
//屏幕变暗/变亮的广播 , 我们要调用KeyguardManager类相应方法去解除屏幕锁定
private BroadcastReceiver mScreenOffReceiver = new BroadcastReceiver(){
@Override
public void onReceive(Context context , Intent intent) {
String action = intent.getAction() ;
Log.i(TAG, intent.toString());
if(action.equals("android.intent.action.SCREEN_OFF")
|| action.equals("android.intent.action.SCREEN_ON") ){
mKeyguardManager = (KeyguardManager)context.getSystemService(Context.KEYGUARD_SERVICE);
mKeyguardLock = mKeyguardManager.newKeyguardLock("zdLock 1");
mKeyguardLock.disableKeyguard();
startActivity(zdLockIntent);
}
}
};
关于参考/设计一个好的解锁界面以及仿正点闹钟滑动解锁,请看我的这篇博客:
《 Android自定义锁屏实现----仿正点闹钟滑屏解锁》
PS:如果觉得本文对你有帮助,请给顶一下。
最后,可能有些同学在做App时,可能想获取系统的登录次数等,例如:登录失败次数等 ; Android系统已经 为我们提供好
了框架去处理,具体对应类是DevicePolicyManager类,关于该类的具体使用请参见该博客:
《【Android设备管理】 利用DevicePolicyManager执行屏幕锁定 》 。
我也不再罗嗦了 ,大家认真学习吧 。 后面我会仔细分析下锁屏框架的一些具体处理函数 。