介绍下GNU Radio的安装。
进入GNU Radio的官网http://gnuradio.org/redmine/projects/gnuradio,进入wiki目录,在content中选择Build GNU,然后根据你的操作系统选择,我的ubuntu。
网站:http://gnuradio.org/redmine/projects/gnuradio/wiki/UbuntuInstall
安装需求:
- Development Tools (need for compilation)
- g++
- git
- make
- autoconf, automake, libtool
- sdcc (from "universe"; 2.4 or newer)
- guile (1.6 or newer)
- ccache (not required, but recommended if you compile frequently)
- Libraries (need for runtime and for compilation)
- python-dev
- FFTW 3.X (fftw3, fftw3-dev)
- cppunit (libcppunit and libcppunit-dev)
- Boost 1.35 (or later)
- libusb and libusb-dev
- wxWidgets (wx-common) and wxPython (python-wxgtk2.8)
- python-numpy (via python-numpy-ext) (for SVN on or after 2007-May-28)
- ALSA (alsa-base, libasound2 and libasound2-dev)
- Qt (libqt3-mt-dev for versions earlier than 8.04; version 4 works for 8.04 and later)
- SDL (libsdl-dev)
- GSL GNU Scientific Library (libgsl0-dev >= 1.10 required for SVN trunk, not in binary repositories for 7.10 and earlier)
- SWIG (1.3.31 or newer required)
- Edgy or previous: requires installation from source
- Feisty or newer: use the standard package install (swig)
- QWT and QWT PLot3d libraries (optional for Qt Gui)
- Polyphase Filter Bank examples
- for the examples in gnuradio-examples/python/pfb to work you need to install python-scipy, python-matplotlib, and python-tk
- Other useful packages
- doxygen (for creating documentation from source code)
- octave (from "universe")
sudo apt-get -y install libxi-dev libqt4-opengl-dev但是后来发现还是缺少很多安转包,因此建议按照10.04的方法安转所有的包
sudo apt-get -y install libfontconfig1-dev libxrender-dev libpulse-dev swig g++ automake autoconf libtool python-dev libfftw3-dev \ libcppunit-dev libboost-all-dev libusb-dev fort77 sdcc sdcc-libraries \ libsdl1.2-dev python-wxgtk2.8 git-core guile-1.8-dev \ libqt4-dev python-numpy ccache python-opengl libgsl0-dev \ python-cheetah python-lxml doxygen qt4-dev-tools \ libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools python-qwt5-qt4接下来就可以下载安装GNU Radio了。首先安转个下载工具git。命令:sudo apt-get install git
然后开始下载gnuradio
git clone http://gnuradio.org/git/gnuradio.git 下载完成后就可以在当前目录下看到gnuradio的问价夹了。进入目录,依次执行如下命令./bootstrap ./configure make注意:运行./configure的时候会发现出现如下错误:The following components were skipped either because you asked not to build them or they didn't pass configuration checks: gcell gr-gcell gr-comedi gr-uhd 根据查阅资料 gcell和gr-gcell这两个包是IBM的内核才需要的。而gr-uhd是使用uhd才需要的,因此需要安装的包为gr-comedi,命令如下: sudo apt-get install libcomedi0 最后make后还是有以下错误: ** GLib-GIO:ERROR:/build/buildd/glib2.0-2.28.6/./gio/gdbusconnection.c:2279:initable_init: assertion failed: (connection->initialization_error == NULL) Aborted FAIL: run_tests ================== 1 of 1 test failed ================== make[6]: *** [check-TESTS] 错误 1 make[6]:正在离开目录 `/usr/gnuradio/gr-qtgui/python' make[5]: *** [check-am] 错误 2 make[5]:正在离开目录 `/usr/gnuradio/gr-qtgui/python' make[4]: *** [check] 错误 2 make[4]:正在离开目录 `/usr/gnuradio/gr-qtgui/python' make[3]: *** [check-recursive] 错误 1 make[3]:正在离开目录 `/usr/gnuradio/gr-qtgui' make[2]: *** [check] 错误 2 make[2]:正在离开目录 `/usr/gnuradio/gr-qtgui' make[1]: *** [check-recursive] 错误 1 make[1]:正在离开目录 `/usr/gnuradio' make: *** [check] 错误 2
上面出现那个错误,我上网找了很多都没有解决,怀疑是我的电脑的ubuntu版本的问题。于是放弃了修改的想法后直接重装了我的ubuntu操作系统10.10的版本(注:前面安装的环境是在ubuntu10.10的版本升级至11.04后的),安装好后重新依照上面的步骤安装成功了。
最后执行gnuradio-companion测试成功与否的时候弹出个错误提示的对话框:"Cannot import gnuradio. Are your PYTHONPATH and LD_LIBRARY_PATH set correctly?"意思大概是 PYTHONPATH和 LD_LIBRARY_PATH两个的路径没有设置正确。于是执行以下命令(参考网站:http://lists.gnu.org/archive/html/discuss-gnuradio/2011-04/msg00167.html):
export PATH=$PATH:/usr/local/bin
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
export PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/local/lib/pkgconfig
export PYTHONPATH=$PYTHONPATH:/usr/local/lib/python2.6/site-packages
然后再执行gnuradio-companion的时候就出现了一个窗口,至此,gnu radio安装就成功了!