frp使用

需求

之前都是用autossh 来负责深度学习主机的端口映射，要启动多个命令，现在用frp

实现

https://github.com/fatedier/frp release里面下载压缩包编辑里面的frpc.ini，

[common]
server_addr = 47.95.198.174
server_port = 7000

[ssh]
type = tcp
local_ip = 127.0.0.1
local_port = 22
remote_port = 10022

[aria2]
type = tcp
local_ip = 127.0.0.1
local_port = 6800
remote_port = 6800

[jupyter]
type = tcp
local_ip = 127.0.0.1
local_port = 8889
remote_port = 8889

其他就按官网来

做成service

frp文件里已经写好了，我改了下路径

[Unit]
Description=Frp Client Service
After=network.target

[Service]
Type=simple
User=nobody
Restart=on-failure
RestartSec=5s
ExecStart=/home/yons/tools/frp/frpc -c /home/yons/tools/frp/frpc.ini
ExecReload=/home/yons/tools/frp/frpc reload -c /home/yons/tools/frp/frpc.ini

[Install]
WantedBy=multi-user.target

启动

sudo ln -s /home/yons/tools/frp/systemd/frpc.service /etc/systemd/system/
sudo systemctl start frpc.service
sudo systemctl enable frpc.service

多server

我有两台跳板机 一台华为云 一台阿里云，搞个frpc2.ini
类似

./frpc -c frpc2.ini

就可以