基于soui4实现一个打印排版软件（十）EAN13码实现

EAN13码
EAN13码绘制如下：

//EAN13
SStringW sstrContent = L"123456789012";
//计算文本所占的大小
SIZE szContent;
pRT->MeasureText(sstrContent, sstrContent.GetLength(), &szContent);
//将绘制条码的区域跟绘制文本的区域分开(此处只考虑文本在下方的情况，如有其他的需求可自己实现)
CRect rcBar(rcWindow);
rcBar.bottom = rcBar.bottom - szContent.cy;
CRect rcText(rcWindow);
rcText.top = rcBar.bottom;

if (sstrContent.GetLength() != 12 && sstrContent.GetLength() != 13)
{
	//数据长度错误
}
//计算校验位
//1 3 5 7 9 11位之和得出C1
//2 4 6 8 10 12位之和乘以3得出C2
//C1 + C2取个位得出CC
//校验码为10 - CC如果结果为10则校验码为0
SStringW sstr1 = sstrContent.GetAt(0);
SStringW sstr2 = sstrContent.GetAt(1);
SStringW sstr3 = sstrContent.GetAt(2);
SStringW sstr4 = sstrContent.GetAt(3);
SStringW sstr5 = sstrContent.GetAt(4);
SStringW sstr6 = sstrContent.GetAt(5);
SStringW sstr7 = sstrContent.GetAt(6);
SStringW sstr8 = sstrContent.GetAt(7);
SStringW sstr9 = sstrContent.GetAt(8);
SStringW sstr10 = sstrContent.GetAt(9);
SStringW sstr11 = sstrContent.GetAt(10);
SStringW sstr12 = sstrContent.GetAt(11);
int nC1 = (std::stoi(sstr1.c_str()) + std::stoi(sstr3.c_str()) + std::stoi(sstr5.c_str()) + std::stoi(sstr7.c_str()) + std::stoi(sstr9.c_str()) + std::stoi(sstr11.c_str()));
int nC2 = (std::stoi(sstr2.c_str()) + std::stoi(sstr4.c_str()) + std::stoi(sstr6.c_str()) + std::stoi(sstr8.c_str()) + std::stoi(sstr10.c_str()) + std::stoi(sstr12.c_str())) * 3;
int nCC = (nC1 + nC2) % 10;
int nCheck = 10 - nCC;
if (nCheck == 10) nCheck = 0;
if (sstrContent.GetLength() == 13)
{
	SStringW sstr13 = sstrContent.GetAt(12);
	int nContentCheck = std::stoi(sstr13.c_str());
	if (nContentCheck != nCheck)
	{
		//校验码错误
	}
}
SStringW sstrData = sstr1 + sstr2 + sstr3 + sstr4 + sstr5 + sstr6 + sstr7 + sstr8 + sstr9 + sstr10 + sstr11 + sstr12;
std::string strContent = S_CW2A(sstrData);
SStringW sstrCheck;
sstrCheck.Format(L"%d", nCheck);

struct zint_symbol* symbol;
symbol = ZBarcode_Create();
symbol->symbology = BARCODE_EANX;
symbol->input_mode = DATA_MODE; //编码格式
int nRet = ZBarcode_Encode_and_Buffer_Vector(symbol, (unsigned char*)strContent.c_str(), strContent.size(), 0);
if (nRet == 0)
{
	ZBarcode_Print(symbol, 0);
	int nMinLen = 1000;
	int nMaxLen = 0;
	std::vector<CRect> vecLines;
	if (symbol->vector)
	{
		struct zint_vector_rect* rect = symbol->vector->rectangles;
		while (rect)
		{
			CRect rcTmp;
			rcTmp.left = rect->x;
			rcTmp.top = rect->y;
			rcTmp.right = rcTmp.left + rect->width;
			rcTmp.bottom = rcTmp.top + rect->height;
			vecLines.push_back(rcTmp);

			if (rect->height > nMaxLen) nMaxLen = rect->height;
			if (rect->height < nMinLen) nMinLen = rect->height;
			rect = rect->next;
		}
	}

	double nDrawUint = (double)rcWindow.Width() / symbol->width;
	double nUint = (double)symbol->bitmap_width / symbol->width;
	std::vector<CRect> vecDrawLines;  //绘制条码条的真实区域
	double dMinReal = 0.0;
	for (int i = 0; i < vecLines.size(); i++)
	{
		CRect rcTmp(vecLines[i]);
		rcTmp.left = rcTmp.left / nUint * nDrawUint;
		rcTmp.right = rcTmp.right / nUint * nDrawUint;
		if (rcTmp.Height() == nMaxLen)
		{
			rcTmp.bottom = rcTmp.top + rcWindow.Height();
		}
		else
		{
			rcTmp.bottom = rcTmp.top + rcBar.Height();
			dMinReal = rcTmp.Height();
		}
		vecDrawLines.push_back(rcTmp);
	}

	//绘制条码
	for (int i = 0; i < vecDrawLines.size(); i++)
	{
		COLORREF clrFrgnd = GETCOLOR(L"RGB(0,0,0)");
		CAutoRefPtr<IBrush> brush, oldbrush;
		pRT->CreateSolidColorBrush(clrFrgnd, &brush);

		CRect rcBlack;
		rcBlack.left += vecDrawLines[i].left + rcBar.left;
		rcBlack.top += vecDrawLines[i].top + rcBar.top;
		rcBlack.right = rcBlack.left + vecDrawLines[i].Width();
		rcBlack.bottom = rcBlack.top + vecDrawLines[i].Height();

		pRT->SelectObject(brush, (IRenderObj**)&oldbrush);
		pRT->FillRectangle(&rcBlack);
		pRT->SelectObject(oldbrush, NULL);
	}

	//绘制文本
	CRect rcStart(rcText), rcContent1(rcText), rcContent2(rcText);
	rcStart.right = rcStart.left + vecDrawLines[0].left - 5;

	rcContent1.left = rcText.left + vecDrawLines[2].left;
	rcContent1.right = rcText.left + vecDrawLines[13].right;

	rcContent2.left = rcText.left + vecDrawLines[16].left;
	rcContent2.right = rcText.left + vecDrawLines[27].right;

	//绘制第一位
	pRT->DrawText(sstr1, -1, (LPRECT)rcStart, DT_RIGHT | DT_VCENTER | DT_SINGLELINE | DT_NOPREFIX);

	//绘制第二部分
	{
		SStringW sstrDrawContent = sstr2 + sstr3 + sstr4 + sstr5 + sstr6 + sstr7;
		pRT->DrawText(sstrDrawContent, -1, (LPRECT)rcContent1, DT_CENTER | DT_VCENTER | DT_SINGLELINE | DT_NOPREFIX);
	}

	//绘制第三部分
	{
		SStringW sstrDrawContent = sstr8 + sstr9 + sstr10 + sstr11 + sstr12 + sstrCheck;
		pRT->DrawText(sstrDrawContent, -1, (LPRECT)rcContent2, DT_CENTER | DT_VCENTER | DT_SINGLELINE | DT_NOPREFIX);
	}
}