Java Service Wrapper 安装 jar包 为windows系统服务（springboot）

说明：在windows下java service wrapper将java服务和对应的jre环境安装为windows服务，不用单独配置环境变量，实现开机自启动，此文章只包含简单使用，进阶教程可以查阅相关文档

1. 下载
   首先从官网下载对应的压缩包https://www.krenger.ch/blog/category/windows/
   注意区分32位还是64位
2. 解压，将下载的压缩包解压
   
3. 新建一个文件夹，这个就是后面的整体安装文件夹java-jsw，并在文件夹下新建bin、conf、lib、logs、jre文件夹
   
4. 打开解压的文件，将src/bin复制到你新建的文件夹bin目录下（去掉.in），wrapper.exe在把解压后文件夹中bin下
   
   复制下面的文件
   
5. 将src\conf中的文件复制到新建的conf文件夹中。把in后缀去掉，其实只有一个文件，即wrapper.conf
6. 把解压后的文件夹中lib中的wrapper.jar与wrapper.dll放到新建的lib下面。同时把启动jar包程序所需要的第三方jar包也放在这里
   
   
7. 配置jre环境，如果待安装电脑存在java环境可以省略此步骤，也不用建jre文件夹
   将你本机的jre包复制一份到jre文件中
   
8. 修改配置文件

• 修改java环境变量

#配置java环境变量，这里我直接用我们刚刚安装的jre，
#如果本机有你可以按照下面注释的内容JAVA_HOME配置上地址即可
wrapper.java.command=../jre/bin/javaw.exe

#set.JAVA_HOME=你的java环境路径
#wrapper.java.command=%JAVA_HOME%/bin/java

• 修改jar包路径，如果有多个可以复制使用.2 等等

wrapper.java.classpath.1=../lib/*.jar

wrapper.java.library.path.1=../lib

• 修改主启动类

wrapper.app.parameter.1=com.xxx.test.xxxxApplication

• 修改服务描述信息

wrapper.name=test

# Display name of the service
wrapper.displayname=test

# Description of the service
wrapper.description=test server

• 配置日志打印路径 YYYYMMDD表示安装日期分开

wrapper.logfile=../logs/run-YYYYMMDD.log

• 设置服务的启动模式

wrapper.startup.mode=AUTO

完整的配置文件在文章最后
9. 点击bin文件夹下面的App.bat进行测试，出现配置错误会进行提示

10. 安装服务，点击InstallApp-NT.bat安装服务，也可以点击UninstallApp-NT.bat卸载服务
打开服务可以看到我们刚刚安装的服务已经注册到系统服务中

右键点击启动即可启动服务,或者使用bin文件夹下的start.sh脚本也可以

完整的配置文件

# encoding=UTF-8
# Configuration files must begin with a line specifying the encoding
#  of the the file.

#********************************************************************
# Wrapper License Properties (Ignored by Community Edition)
#********************************************************************
# Professional and Standard Editions of the Wrapper require a valid
#  License Key to start.  Licenses can be purchased or a trial license
#  requested on the following pages:
# http://wrapper.tanukisoftware.com/purchase
# http://wrapper.tanukisoftware.com/trial

# Include file problems can be debugged by leaving only one '#'
#  at the beginning of the following line:
##include.debug

# The Wrapper will look for either of the following optional files for a
#  valid License Key.  License Key properties can optionally be included
#  directly in this configuration file.
#include ../conf/wrapper-license.conf
#include ../conf/wrapper-license-%WRAPPER_HOST_NAME%.conf

# The following property will output information about which License Key(s)
#  are being found, and can aid in resolving any licensing problems.
#wrapper.license.debug=TRUE

#********************************************************************
# Wrapper Localization
#********************************************************************
# Specify the language and locale which the Wrapper should use.
#wrapper.lang=en_US # en_US or ja_JP

# Specify the location of the language resource files (*.mo).
wrapper.lang.folder=../lang

#********************************************************************
# Wrapper Java Properties
#********************************************************************
# Java Application
#  Locate the java binary on the system PATH:
wrapper.java.command=../jre/bin/javaw.exe
#  Specify a specific java binary:
#set.JAVA_HOME=/java/path
#wrapper.java.command=%JAVA_HOME%/bin/java

# Tell the Wrapper to log the full generated Java command line.
wrapper.java.command.loglevel=DEBUG

# Java Main class.  This class must implement the WrapperListener interface
#  or guarantee that the WrapperManager class is initialized.  Helper
#  classes are provided to do this for you.
#  See the following page for details:
#  http://wrapper.tanukisoftware.com/doc/english/integrate.html
wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp

# Log level for notices about missing Java Classpath entries.
wrapper.java.classpath.missing.loglevel=WARN

# Java Classpath (include wrapper.jar)  Add class path elements as
#  needed starting from 1
wrapper.java.classpath.1=../lib/*.jar
#wrapper.java.classpath.2=../lib/wrapper.jar


# Java Library Path (location of Wrapper.DLL or libwrapper.so)
wrapper.java.library.path.1=../lib

# Java Bits.  On applicable platforms, tells the JVM to run in 32 or 64-bit mode.
wrapper.java.additional.auto_bits=TRUE

# Java Additional Parameters
wrapper.java.additional.1=

# Initial Java Heap Size (in MB)
#wrapper.java.initmemory=3

# Maximum Java Heap Size (in MB)
#wrapper.java.maxmemory=64

# Application parameters.  Add parameters as needed starting from 1
#wrapper.app.parameter.1=org.springframework.boot.loader.JarLauncher
wrapper.app.parameter.1=com.lc.test.TestApplication

#********************************************************************
# Wrapper Logging Properties
#********************************************************************
# Enables Debug output from the Wrapper.
# wrapper.debug=TRUE

# Format of output for the console.  (See docs for formats)
wrapper.console.format=PM

# Log Level for console output.  (See docs for log levels)
wrapper.console.loglevel=INFO

# Log file to use for wrapper output logging.
wrapper.logfile=../logs/run-YYYYMMDD.log

# Format of output for the log file.  (See docs for formats)
wrapper.logfile.format=LPTM

# Log Level for log file output.  (See docs for log levels)
wrapper.logfile.loglevel=INFO

# Roll mode of the log file.
#  SIZE_OR_WRAPPER causes the file to be rolled whenever its size exceeds the
#  value defined by wrapper.logfile.maxsize, or whenever the Wrapper is
#  launched.
wrapper.logfile.rollmode=DATE

# Maximum size that the log file will be allowed to grow to before
#  the log is rolled. Size is specified in bytes.  The default value
#  of 0, disables log rolling.  May abbreviate with the 'k' (kb) or
#  'm' (mb) suffix.  For example: 10m = 10 megabytes.
wrapper.logfile.maxsize=10m

# Maximum number of rolled log files which will be allowed before old
#  files are deleted.  The default value of 0 implies no limit.
wrapper.logfile.maxfiles=15

# Log Level for sys/event log output.  (See docs for log levels)
wrapper.syslog.loglevel=NONE

#********************************************************************
# Wrapper General Properties
#********************************************************************
# Allow for the use of non-contiguous numbered properties
wrapper.ignore_sequence_gaps=TRUE

# Do not start if the pid file already exists.
wrapper.pidfile.strict=TRUE

# Title to use when running as a console
wrapper.console.title=test

#********************************************************************
# Wrapper JVM Checks
#********************************************************************
# Detect DeadLocked Threads in the JVM. (Requires Standard Edition)
wrapper.check.deadlock=TRUE
wrapper.check.deadlock.interval=30
wrapper.check.deadlock.action=RESTART
wrapper.check.deadlock.output=FULL

# Out Of Memory detection.
#  Ignore -verbose:class output to avoid false positives.
wrapper.filter.trigger.1000=[Loaded java.lang.OutOfMemoryError
wrapper.filter.action.1000=NONE
# (Simple match)
wrapper.filter.trigger.1001=java.lang.OutOfMemoryError
# (Only match text in stack traces if -XX:+PrintClassHistogram is being used.)
#wrapper.filter.trigger.1001=Exception in thread "*" java.lang.OutOfMemoryError
#wrapper.filter.allow_wildcards.1001=TRUE
wrapper.filter.action.1001=RESTART
wrapper.filter.message.1001=The JVM has run out of memory.

#********************************************************************
# Wrapper Email Notifications. (Requires Professional Edition)
#********************************************************************
# Common Event Email settings.
#wrapper.event.default.email.debug=TRUE
#wrapper.event.default.email.smtp.host=<SMTP_Host>
#wrapper.event.default.email.smtp.port=25
#wrapper.event.default.email.subject=[%WRAPPER_HOSTNAME%:%WRAPPER_NAME%:%WRAPPER_EVENT_NAME%] Event Notification
#wrapper.event.default.email.sender=<Sender email>
#wrapper.event.default.email.recipient=<Recipient email>

# Configure the log attached to event emails.
#wrapper.event.default.email.maillog=ATTACHMENT
#wrapper.event.default.email.maillog.lines=50
#wrapper.event.default.email.maillog.format=LPTM
#wrapper.event.default.email.maillog.loglevel=INFO

# Enable specific event emails.
#wrapper.event.wrapper_start.email=TRUE
#wrapper.event.jvm_prelaunch.email=TRUE
#wrapper.event.jvm_start.email=TRUE
#wrapper.event.jvm_started.email=TRUE
#wrapper.event.jvm_deadlock.email=TRUE
#wrapper.event.jvm_stop.email=TRUE
#wrapper.event.jvm_stopped.email=TRUE
#wrapper.event.jvm_restart.email=TRUE
#wrapper.event.jvm_failed_invocation.email=TRUE
#wrapper.event.jvm_max_failed_invocations.email=TRUE
#wrapper.event.jvm_kill.email=TRUE
#wrapper.event.jvm_killed.email=TRUE
#wrapper.event.jvm_unexpected_exit.email=TRUE
#wrapper.event.wrapper_stop.email=TRUE

# Specify custom mail content
wrapper.event.jvm_restart.email.body=The JVM was restarted.\n\nPlease check on its status.\n

#********************************************************************
# Wrapper Windows Service Properties
#********************************************************************
# WARNING - Do not modify any of these properties when an application
#  using this configuration file has been installed as a service.
#  Please uninstall the service before modifying this section.  The
#  service can then be reinstalled.

# Name of the service
wrapper.name=test

# Display name of the service
wrapper.displayname=test

# Description of the service
wrapper.description=test server

# Service dependencies.  Add dependencies as needed starting from 1
wrapper.ntservice.dependency.1=

# Mode in which the service is installed.
#  AUTO_START, DELAY_START (Requires Standard Edition) or DEMAND_START
wrapper.ntservice.starttype=AUTO_START

# Allow the service to interact with the desktop (Windows NT/2000/XP only).
wrapper.ntservice.interactive=FALSE

# Allow the current user to perform certain actions without being prompted for
#  administrator credentials. (Requires Professional Edition)
#wrapper.ntservice.permissions.1.account=CURRENT_USER
#wrapper.ntservice.permissions.1.allow=START, STOP, PAUSE_RESUME