nginx常用功能
1、Http代理,反向代理
2、负载均衡
docker安装
#拉取镜像
docker pull nginx
#后台运行
docker run --name knowledgenginx -p 9002:80 -v /home/knowledgeCMS/www:/usr/share/nginx/html -v /home/knowledgeCMS/conf/conf.d:/etc/nginx/conf.d -d nginx
#先停止 再删除
docker stop knowledgenginx
docker rm knowledgenginx
命令
nginx -v #nginx版本
nginx -t #检查配置文件nginx.conf的正确性,也显示配置文件位置
nginx -s reload # 重新载入配置文件
nginx -s reopen # 重启 Nginx
nginx -s stop # 停止 Nginx
linux命令
whereis nginx #查看软件安装路径
which nginx #查看运行文件所在路径
nginx -t 命令找出nginx配置文件的所在位置?
nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful
这个配置文件/etc/nginx/nginx.conf里有这句话include /etc/nginx/conf.d/*.conf;说明可以把自己的配置文件放在这个目录下
配置文件xxxx.conf
1、全局块:配置影响nginx全局的指令。一般有运行nginx服务器的用户组,nginx进程pid存放路径,日志存放路径,配置文件引入,允许生成worker process数等。
2、events块:配置影响nginx服务器或与用户的网络连接。有每个进程的最大连接数,选取哪种事件驱动模型处理连接请求,是否允许同时接受多个网路连接,开启多个网络连接序列化等。
3、http块:可以嵌套多个server,配置代理,缓存,日志定义等绝大多数功能和第三方模块的配置。如文件引入,mime-type定义,日志自定义,是否使用sendfile传输文件,连接超时时间,单连接请求数等。
4、server块:配置虚拟主机的相关参数,一个http中可以有多个server。
5、location块:配置请求的路由,以及各种页面的处理情况。
大致结构
... #全局块
events { #events块
...
}
http #http块
{
... #http全局块
server #server块
{
... #server全局块
location [PATTERN] #location块
{
...
}
location [PATTERN]
{
...
}
}
server
{
...
}
... #http全局块
}
示例 1:反向代理----外部ip:80转到http://123.56.90.95:8080;
server {
listen 80;
server_name localhost;
location / {
proxy_pass http://123.56.90.95:8080;
}
}
示例 2 我的配置
server { #Nginx的server虚拟主机配置
listen 80; #监听端口
server_name localhost; #监听地址
location / { #请求的url过滤,正则匹配,~为区分大小写,~*为不区分大小写。/通用匹配
root /usr/share/nginx/html; #设置虚拟主机的网站根目录
index index.html index.htm index.php; #设置虚拟主机默认访问的网页
}
error_page 500 502 503 504 /50x.html; #错误页
location = /50x.html {
root /usr/share/nginx/html;
}
location ~ \.php$ { #.php #请求的url过滤,.php后缀
root /var/www/html; #设置web资料路径,注意这个路径是php的web资源路径
fastcgi_pass 172.18.0.4:9000; #将请求转发给172.18.0.4:9000端口,PHP解释器 。容器名不行,得用ip 通过docker inspect --format='{{.NetworkSettings.IPAddress}}' 容器名 得到
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include fastcgi_params;
}
}
示例 3 常用
########### 每个指令必须有分号结束。#################
#user administrator administrators; #配置用户或者组,默认为nobody nobody。
#worker_processes 2; #允许生成的进程数,默认为1
#pid /nginx/pid/nginx.pid; #指定nginx进程运行文件存放地址
error_log log/error.log debug; #制定日志路径,级别。这个设置可以放入全局块,http块,server块,级别以此为:debug|info|notice|warn|error|crit|alert|emerg
events {
accept_mutex on; #设置网路连接序列化,防止惊群现象发生,默认为on
multi_accept on; #设置一个进程是否同时接受多个网络连接,默认为off
#use epoll; #事件驱动模型,select|poll|kqueue|epoll|resig|/dev/poll|eventport
worker_connections 1024; #最大连接数,默认为512
}
http {
include mime.types; #文件扩展名与文件类型映射表
default_type application/octet-stream; #默认文件类型,默认为text/plain
#access_log off; #取消服务日志
log_format myFormat '$remote_addr–$remote_user [$time_local] $request $status $body_bytes_sent $http_referer $http_user_agent $http_x_forwarded_for'; #自定义格式
access_log log/access.log myFormat; #combined为日志格式的默认值
sendfile on; #允许sendfile方式传输文件,默认为off,可以在http块,server块,location块。
sendfile_max_chunk 100k; #每个进程每次调用传输数量不能大于设定的值,默认为0,即不设上限。
keepalive_timeout 65; #连接超时时间,默认为75s,可以在http,server,location块。
upstream mysvr {
server 127.0.0.1:7878;
server 192.168.10.121:3333 backup; #热备
}
error_page 404 https://www.baidu.com; #错误页
server {
keepalive_requests 120; #单连接请求上限次数。
listen 4545; #监听端口
server_name 127.0.0.1; #监听地址
location ~*^.+$ { #请求的url过滤,正则匹配,~为区分大小写,~*为不区分大小写。
#root path; #根目录
#index vv.txt; #设置默认页
proxy_pass http://mysvr; #请求转向mysvr 定义的服务器列表
deny 127.0.0.1; #拒绝的ip
allow 172.18.5.54; #允许的ip
}
}
}
路径中正则匹配
# 正则匹配
匹配优先级:精确匹配 >(^~) > 正则匹配 > 字符串(长 > 短)
= 精确匹配;
^~ 提高前缀字符串的匹配优先级;
~ 区分大小写的正则表达式匹配;
~* 不区分大小写的正则表达式匹配;
/ 通用匹配(因为所有的地址都以 / 开头,所以这条规则将匹配到所有请求),如果没有其它匹配,任何请求都会匹配到。
看nginx日志
docker logs -f knowledgenginx 1>/dev/null