基于51的OLED驱动

oled12864.h

#include "REG51.h"
#include "6x8.h"
#include "8x16.h"
#include "16x16.h"

#define XLevelL		0x00
#define XLevelH		0x10
#define XLevel	    ((XLevelH&0x0F)*16+XLevelL)
#define Max_Column	128
#define Max_Row		64
#define	Brightness	0xCF 
#define X_WIDTH 128
#define Y_WIDTH 64


sbit LCD_SCL=P1^4; //时钟 D0（SCLK）
sbit LCD_SDA=P1^5; //D1（MOSI） 数据
sbit LCD_RST=P1^6; //复位 
sbit LCD_DC =P1^7; //数据/命令控制

void LCD_DLY_ms(unsigned int ms)  //LCD 延时1ms
{                         
   unsigned int a;
   while(ms)
   {
     a=1800;
     while(a--);
     ms--;
}
return;
}

void LCD_WrDat(unsigned char dat)   //**LCD写数据  
{
   unsigned char i=8;					   	
   LCD_DC=1;  
   for(i=0;i<8;i++) //发送一个八位数据 
   {
     LCD_SCL=0;  						  
     LCD_SDA=dat&0x80;
     LCD_SCL=1;             
     dat<<=1;    
   }
}
void LCD_WrCmd(unsigned char cmd) 	 //****LCD写命令
{
  unsigned char i=8;						   
  LCD_DC=0;
  for(i=0;i<8;i++) //发送一个八位数据 
  { 
    LCD_SCL=0; 
    LCD_SDA=cmd&0x80;
    LCD_SCL=1;
    cmd<<=1;;   
  } 	
}

void LCD_Setxy(unsigned char x, unsigned char y) 	//LCD 设置坐标
{ 
  LCD_WrCmd(0xb0+y);
  LCD_WrCmd(((x&0xf0)>>4)|0x10);
  LCD_WrCmd((x&0x0f)|0x01); 
} 
void LCD_Fill(unsigned char bmp_dat)   //bmp_dat=0x00全屏灭，bmp_dat=0xff全屏亮
{
   unsigned char y,x;
   for(y=0;y<8;y++)
   {
     LCD_WrCmd(0xb0+y);
     LCD_WrCmd(0x01);
     LCD_WrCmd(0x10);
     for(x=0;x<X_WIDTH;x++)
        LCD_WrDat(bmp_dat);
}
}
void LCD_CLS(void) //LCD复位
{
   unsigned char y,x;	
   for(y=0;y<8;y++)
   {
     LCD_WrCmd(0xb0+y);
     LCD_WrCmd(0x01);
     LCD_WrCmd(0x10); 
     for(x=0;x<X_WIDTH;x++)
         LCD_WrDat(0);
   }
}

void LCD_Init(void) //LCD初始化  
{  
   LCD_SCL=1;
   LCD_RST=0;
   LCD_DLY_ms(50);
   LCD_RST=1;       //从上电到下面开始初始化要有足够的时间，即等待RC复位完毕   
   LCD_WrCmd(0xae);//--关闭显示						                    turn off oled panel
   LCD_WrCmd(0x00);//---设置低列地址                                    set low column address
   LCD_WrCmd(0x10);//---高列地址                                        set high column address	
   LCD_WrCmd(0x40);//--设置起始地址映射内存显示开始行（0x 00 ~ 0x3f）   set start line address  Set Mapping RAM Display Start Line (0x00~0x3F)
   LCD_WrCmd(0x81);//--设置对比度控制寄存器                             set contrast control register
   LCD_WrCmd(0xcf); // 电流输出亮度设置赛格                             Set SEG Output Current Brightness
   LCD_WrCmd(0xa1);//--设置赛格/列映射  0xa0左右反置0xa1正常            Set SEG/Column Mapping     0xa0左右反置 0xa1正常
   LCD_WrCmd(0xc8);//设置网站/行扫描方向 0xc0上下反置 0xc8正常          Set COM/Row Scan Direction   
   LCD_WrCmd(0xa6);//--正常显示                                         set normal display
   LCD_WrCmd(0xa8);//--集复用率（1 - 64）                               set multiplex ratio(1 to 64)
   LCD_WrCmd(0x3f);//--1/64 duty
   LCD_WrCmd(0xd3);//-设置显示偏移位移映射内存计数器（0x 00 ~ 0x3f）    set display offset	Shift Mapping RAM Counter (0x00~0x3F)
   LCD_WrCmd(0x00);//-不偏移                                            not offset
   LCD_WrCmd(0xd5);//--设置显示时钟的分频比/振荡器频率                  set display clock divide ratio/oscillator frequency
   LCD_WrCmd(0x80);//--组分比，时钟设置为100帧/秒                       set divide ratio, Set Clock as 100 Frames/Sec
   LCD_WrCmd(0xd9);//--设定充电周期                                     set pre-charge period
   LCD_WrCmd(0xf1);//15集充电放电1钟钟表                                Set Pre-Charge as 15 Clocks & Discharge as 1 Clock
   LCD_WrCmd(0xda);//--设置组件的引脚配置硬件                           set com pins hardware configuration
   LCD_WrCmd(0x12);
   LCD_WrCmd(0xdb);//--集vcomh                                          set vcomh
   LCD_WrCmd(0x40);//威科姆取消水平集                                   Set VCOM Deselect Level
   LCD_WrCmd(0x20);//-设置页面寻址模式（0x 00 /将/ 0x02）               Set Page Addressing Mode (0x00/0x01/0x02)
   LCD_WrCmd(0x02);//
   LCD_WrCmd(0x8d);//--充电泵启用/禁用                                  set Charge Pump enable/disable
   LCD_WrCmd(0x14);//--集（0x 10个）禁用                                set(0x10) disable
   LCD_WrCmd(0xa4);// 使整个显示（0xa4 / 0xa5）                         Disable Entire Display On (0xa4/0xa5)
   LCD_WrCmd(0xa6);// 禁用反显示（0xa6 / 7）                            Disable Inverse Display On (0xa6/a7) 
   LCD_WrCmd(0xaf);//--打开面板                                         turn on oled panel
   LCD_Fill(0x00);  //初始清屏
   LCD_Setxy(0,0); 
}	

//显示6*8一组标准ASCII字符串	显示的坐标（x,y），y为页范围0～7
void LCD_6x8(unsigned char x, y,unsigned char ch[])
{
   unsigned char c=0,i=0,j=0;      
   while (ch[j]!='\0')
   {    
     c =ch[j]-32;
     if(x>126)
	    {x=0;y++;}
     LCD_Setxy(x,y);    
     for(i=0;i<6;i++)     
       LCD_WrDat(F6x8[c][i]);  
     x+=6;
     j++;
   }
}
void LCD_Cler_6x8(unsigned char x,y,n)//清除N个6*8字符
{
   unsigned int i=0;
   LCD_Setxy(x,y);
   if(x>126)
	 {x=0;y++;}
   for(i=0;i<6*n;i++)
       LCD_WrDat(0x00);
}
void LCD_8x16(unsigned char x, y,unsigned char ch[])//显示8*16一组标准ASCII字符串	 显示的坐标（x,y），y为页范围0～7
{
  unsigned char c=0,i=0,j=0;
  while (ch[j]!='\0')
  {    
    c =ch[j]-32;
    if(x>120)
	  {x=0;y++;}
    LCD_Setxy(x,y);    
    for(i=0;i<8;i++)     
      LCD_WrDat(F8X16[c*16+i]);
    LCD_Setxy(x,y+1);    
    for(i=0;i<8;i++)     
      LCD_WrDat(F8X16[c*16+i+8]);  
    x+=8;
    j++;
  }
}
void LCD_Cler_8x16(unsigned char x, y,n) //清除n个8*16字符
{
    unsigned char i;
    if(x>120)
	  {x=0;y++;}
	LCD_Setxy(x,y);
	for(i=0;i<8*n;i++)
	  LCD_WrDat(0x00);
    LCD_Setxy(x,y+1);
	for(i=0;i<8*n;i++)
	  LCD_WrDat(0x00);    
}
void LCD_16x16(unsigned char x, y, N)//显示16*16点阵  显示的坐标（x,y），y为页范围0～7，N表示该汉字是数组F16x16中的第N个（从0开始）。
{
  unsigned char wm=0;
  unsigned int adder=32*N;  //  	
  LCD_Setxy(x , y);
  for(wm = 0;wm < 16;wm++)  //             
  {
    LCD_WrDat(F16x16[adder]);	
    adder += 1;
  }      
  LCD_Setxy(x,y + 1); 
  for(wm = 0;wm < 16;wm++) //         
  {
    LCD_WrDat(F16x16[adder]);
    adder += 1;
  } 	  	
}
void LCD_Cler_16x16(unsigned char x,y,n)//清除n个16*16字
{
  unsigned char i=0;
  LCD_Setxy(x,y);
  for(i=0;i<16*n;i++)
     LCD_WrDat(0x00);
  LCD_Setxy(x,y+1);
  for(i=0;i<16*n;i++)
     LCD_WrDat(0x00);
}
void Draw_BMP(unsigned char x0, y0,x1, y1,unsigned char BMP[])//显示显示BMP图片128×64起始点坐标(x,y),x的范围0～127，y为页的范围0～7*
{ 	
 unsigned int j=0;
 unsigned char x,y;
  
  if(y1%8==0)
     y=y1/8;      
  else 
     y=y1/8+1;
  for(y=y0;y<y1;y++)
  {
     LCD_Setxy(x0,y);				
     for(x=x0;x<x1;x++)
	 {      
	    LCD_WrDat(BMP[j++]);	    	
	 }
  }
}

6x8.h

const unsigned char code F6x8[][6] =		
{
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp
0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// !
0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// "
0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// #
0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $
0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// %
0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// &
0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// '
0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// (
0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// )
0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// *
0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// +
0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// ,
0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// -
0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// .
0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// /
0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 0
0x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 1
0x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 2
0x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 3
0x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 4
0x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 5
0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 6
0x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 7
0x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 8
0x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 9
0x00, 0x00, 0x36, 0x36, 0x00, 0x00,// :
0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ;
0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// <
0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// =
0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// >
0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ?
0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @
0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A
0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B
0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C
0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D
0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E
0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F
0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G
0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H
0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I
0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J
0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K
0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L
0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M
0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N
0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O
0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P
0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q
0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R
0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S
0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T
0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U
0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V
0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W
0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X
0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y
0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z
0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [
0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 55
0x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ]
0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^
0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _
0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// '
0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a
0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b
0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c
0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d
0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e
0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f
0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g
0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h
0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i
0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j
0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k
0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l
0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m
0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n
0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o
0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p
0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q
0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r
0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s
0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t
0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u
0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v
0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w
0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x
0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y
0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z
0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines
};

8x16.h

const unsigned char code F8X16[]=	  
{
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0
  0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1
  0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
  0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3
  0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4
  0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5
  0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6
  0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
  0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8
  0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9
  0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10
  0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14
  0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16
  0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17
  0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18
  0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19
  0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20
  0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21
  0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22
  0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23
  0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25
  0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26
  0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27
  0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28
  0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29
  0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30
  0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31
  0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32
  0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33
  0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34
  0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35
  0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38
  0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40
  0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41
  0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42
  0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43
  0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44
  0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45
  0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47
  0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49
  0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50
  0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51
  0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53
  0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54
  0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55
  0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56
  0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57
  0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58
  0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59
  0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60
  0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61
  0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63
  0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65
  0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66
  0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67
  0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69
  0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71
  0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72
  0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73
  0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74
  0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75
  0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76
  0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77
  0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79
  0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80
  0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81
  0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83
  0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84
  0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86
  0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87
  0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89
  0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90
  0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91
  0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92
  0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93
  0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};

16x16.h

根据需要对汉字取模放入数组中。根据驱动函数进行使用。例：在(0,0)处写“囧”：LCD_16x16(0, 0, 0)；

unsigned char code F16x16[] = 	  	 
{
0x00,0x00,0xFE,0x82,0x42,0x22,0x1A,0x02,0x02,0x12,0x22,0xC2,0x02,0xFE,0x00,0x00,
0x00,0x00,0x7F,0x20,0x20,0x3F,0x21,0x21,0x21,0x3F,0x20,0x20,0x20,0x7F,0x00,0x00,/*"囧",0*/
0x00,0x00,0xF8,0x48,0x48,0x48,0xC8,0x08,0x08,0xFF,0x08,0x09,0xEA,0x08,0x00,0x00,
0x00,0x20,0x1F,0x00,0x08,0x08,0x07,0x20,0x10,0x0B,0x04,0x0B,0x10,0x3C,0x00,0x00,/*"成",1*/
0x00,0x04,0x04,0xFC,0x04,0x04,0x00,0x08,0xFF,0x08,0x08,0x08,0xF8,0x00,0x00,0x00,
0x00,0x04,0x04,0x03,0x02,0x22,0x10,0x0C,0x03,0x00,0x20,0x20,0x1F,0x00,0x00,0x00,/*"功",2*/
0x00,0x00,0x00,0x00,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x19,0x19,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"！",3*/


};