ubuntu编译安装或升级到php8

一,下载php8.2.8安装包

wget https://www.php.net/distributions/php-8.2.8.tar.gz
tar -zxvf  php-8.2.8.tar.gz
cd   php-8.2.8

二,安装编译需要的依赖

apt update
apt install libxml2 libxml2-dev libkrb5-dev libsqlite3-dev libbz2-dev libcurl4-openssl-dev libpng-dev libjpeg-dev libfreetype-dev libonig-dev libxslt-dev libzip-dev openssl libssl-dev libpq-dev libreadline-dev libsodium-dev libmagickwand-dev -y

三,编译安装php

##创建PHP用户
addgroup --system php && adduser --system --disabled-login --ingroup php --no-create-home --home /nonexistent --gecos "php user" --shell /bin/false  php

##编译安装PHP
./configure --prefix=/usr/local/php  \
--with-config-file-path=/usr/local/php/etc  \
--with-config-file-scan-dir=/usr/local/php/conf.d \
--with-fpm-user=php \
--with-fpm-group=php \     
--enable-debug \
--with-ffi  \
--with-curl  \
--with-freetype  \
--enable-gd  \
--with-jpeg   \
--with-gettext  \
--with-kerberos  \
--with-libdir=lib64  \
--with-libxml  \
--with-mysqli  \
--with-openssl  \
--with-pdo-mysql   \
--with-pdo-sqlite  \
--with-pear  \
--enable-sockets  \
--with-mhash  \
--with-ldap-sasl  \
--with-xsl  \
--with-zlib  \
--with-zip -with-bz2  \
--with-iconv   \
--enable-mbstring \
--enable-fpm  \
--enable-pdo   \
--enable-bcmath   \
--enable-mbregex  \
--enable-mbstring  \
--enable-opcache  \
--enable-pcntl   \
--enable-shmop  \
--enable-soap  \
--enable-sockets  \
--enable-sysvsem  \
--enable-xml  \
--enable-sysvsem  \
--enable-cli  \
--enable-opcache  \
--enable-intl  \
--enable-calendar  \
--enable-static  \
--enable-mysqlnd \
--enable-exif \
--enable-ftp \
--with-pgsql \
--with-readline \
--with-sodium \
--enable-sysvmsg \
--enable-sysvshm 
&& make &&  make install 


###编译结束,无报错,验证版本和模块

/usr/local/php/bin/php -v
/usr/local/php/bin/php -m
/usr/local/php/sbin/php-fpm -v
/usr/local/php/sbin/php-fpm -m

####配置文件
 cp -a  /usr/local/php/etc/php-fpm.conf.default  /usr/local/php/etc/php-fpm.conf
 cp -a  php.ini-production   /usr/local/php/etc/php.ini
 cp -a  /usr/local/php825/etc/php-fpm.d/www.conf.default  /usr/local/php/etc/php-fpm.d/www.conf

四:创建php service启动文件

 vi  /etc/init.d/php-fpm 
#!/bin/sh
### BEGIN INIT INFO
# Provides:          php8.2-fpm
# Required-Start:    $remote_fs $network
# Required-Stop:     $remote_fs $network
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: starts php8.2-fpm
# Description:       Starts The PHP FastCGI Process Manager Daemon
### END INIT INFO

# Author: Ondrej Sury <ondrej@debian.org>

PATH=/sbin:/usr/sbin:/bin:/usr/bin
DESC="PHP 8.2 FastCGI Process Manager"
NAME=php-fpm
CONFFILE=/usr/local/php/etc/php-fpm.conf
DAEMON=/usr/local/php/sbin/$NAME
DAEMON_ARGS="--daemonize --fpm-config $CONFFILE"
CONF_PIDFILE=$(sed -n 's/^pid[ =]*//p' $CONFFILE)
PIDFILE=${CONF_PIDFILE:-/run/php/php8.2-fpm.pid}
TIMEOUT=30
SCRIPTNAME=/etc/init.d/$NAME

# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0

# Read configuration variable file if it is present
[ -r /etc/default/$NAME ] && . /etc/default/$NAME

# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
. /lib/lsb/init-functions

#
# Function that starts the daemon/service
#
do_start()
{
        # Return
        #   0 if daemon has been started
        #   1 if daemon was already running
        #   2 if daemon could not be started
        start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
                || return 1
        start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
                $DAEMON_ARGS 2>/dev/null \
                || return 2
        # Add code here, if necessary, that waits for the process to be ready
        # to handle requests from services started subsequently which depend
        # on this one.  As a last resort, sleep for some time.
}

#
# Function that stops the daemon/service
#
do_stop()
{
        # Return
        #   0 if daemon has been stopped
        #   1 if daemon was already stopped
        #   2 if daemon could not be stopped
        #   other if a failure occurred
        start-stop-daemon --stop --quiet --retry=QUIT/$TIMEOUT/TERM/5/KILL/5 --pidfile $PIDFILE --name $NAME
        RETVAL="$?"
        [ "$RETVAL" = 2 ] && return 2
        # Wait for children to finish too if this is a daemon that forks
        # and if the daemon is only ever run from this initscript.
        # If the above conditions are not satisfied then add some other code
        # that waits for the process to drop all resources that could be
        # needed by services started subsequently.  A last resort is to
        # sleep for some time.
        start-stop-daemon --stop --quiet --oknodo --retry=0/30/TERM/5/KILL/5 --exec $DAEMON
        [ "$?" = 2 ] && return 2
        # Many daemons don't delete their pidfiles when they exit.
        rm -f $PIDFILE
        return "$RETVAL"
}

#
# Function that sends a SIGHUP to the daemon/service
#
do_reload() {
        #
        # If the daemon can reload its configuration without
        # restarting (for example, when it is sent a SIGHUP),
        # then implement that here.
        #
        start-stop-daemon --stop --signal USR2 --quiet --pidfile $PIDFILE --name $NAME
        return 0
}

case "$1" in
    start)
        [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
        systemd-tmpfiles --remove --create /usr/lib/tmpfiles.d/php8.2.5-fpm.conf
        case "$?" in
            0)
                do_start
                case "$?" in
                    0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
                    2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
                esac
                ;;
            1) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
        esac
        ;;
    stop)
        [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
        do_stop
        case "$?" in
                0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
                2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
        esac
        ;;
    status)
        status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
        ;;
    reload|force-reload)
        log_daemon_msg "Reloading $DESC" "$NAME"
        do_reload
        log_end_msg $?
        ;;
    reopen-logs)
        log_daemon_msg "Reopening $DESC logs" $NAME
        if start-stop-daemon --stop --signal USR1 --oknodo --quiet \
            --pidfile $PIDFILE --exec $DAEMON
        then
            log_end_msg 0
        else
            log_end_msg 1
        fi
        ;;
    restart)
        log_daemon_msg "Restarting $DESC" "$NAME"
        do_stop
        case "$?" in
          0|1)
                do_start
                case "$?" in
                        0) log_end_msg 0 ;;
                        1) log_end_msg 1 ;; # Old process is still running
                        *) log_end_msg 1 ;; # Failed to start
                esac
                ;;
          *)
                # Failed to stop
                log_end_msg 1
                ;;
        esac
        ;;
    *)
        echo "Usage: $SCRIPTNAME {start|stop|status|restart|reload|force-reload}" >&2
        exit 1
    ;;
esac

:

五,启动php-fpm

service php-fpm  status
service php-fpm  start
service php-fpm  status

##配置文件可自行修改