在H3C交换机中配置链路聚合-CSDN博客

#配置链路聚合
#在系统视图下创建聚合端口
[H3C]interface Bridge-Aggregation 2
#在接口视图下把物理端口加入聚合组
[H3C-Bridge-Aggregation2]interface GigabitEthernet1/0/17
[H3C-GigabitEthernet1/0/17]port link-aggregation group 2



[H3C-GigabitEthernet1/0/17]interface GigabitEthernet1/0/18
[H3C-GigabitEthernet1/0/18]port link-aggregation group 2
[H3C-GigabitEthernet1/0/18]interface GigabitEthernet1/0/19
[H3C-GigabitEthernet1/0/19]port link-aggregation group 2
[H3C-GigabitEthernet1/0/19]interface GigabitEthernet1/0/20
[H3C-GigabitEthernet1/0/20]port link-aggregation group 2
[H3C-GigabitEthernet1/0/20]quit


#查看链路聚合状态
[H3C]display link-aggregation summary
Aggregation Interface Type:
BAGG -- Bridge-Aggregation, BLAGG -- Blade-Aggregation, RAGG -- Route-Aggregation
Aggregation Mode: S -- Static, D -- Dynamic
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor System ID: 0x8000, 9428-2e15-4f70

AGG        AGG   Partner ID              Selected  Unselected  Individual  Share
Interface  Mode                          Ports     Ports       Ports       Type
--------------------------------------------------------------------------------
BAGG1      S     None                    0         4           0           Shar
BAGG2      S     None                    0         4           0           Shar

转载于:https://my.oschina.net/houor/blog/3084326