zookeeper伪集群配置

1  环境 win7-64位环境  zookeeper-3.4.11

2 将 zookeeper-3.4.11拷贝三份放置目录结构如下

    

D:\Program Files\zookeeper\zookeeper-cluster\zk001\zookeeper-3.4.11

D:\Program Files\zookeeper\zookeeper-cluster\zk002\zookeeper-3.4.11

D:\Program Files\zookeeper\zookeeper-cluster\zk003\zookeeper-3.4.11

3 配置服务zk001 的配置文件

   配置文件目录：D:\Program Files\zookeeper\zookeeper-cluster\zk001\zookeeper-3.4.11\conf

  将zoo_sample.cfg拷贝一份zoo.cfg

   zoo.cfg内容如下：

tickTime=2000

# The number of ticks that the initial

# synchronization phase can take

initLimit=10

# The number of ticks that can pass between

# sending a request and getting an acknowledgement

syncLimit=5

# the directory where the snapshot is stored.

# do not use /tmp for storage, /tmp here is just

# example sakes.

dataDir=D:/Program Files/zookeeper/zookeeper-cluster/zk001/zookeeper-3.4.11/data

dataLogDir=D:/Program Files/zookeeper/zookeeper-cluster/zk001/zookeeper-3.4.11/logs

# the port at which the clients will connect

clientPort=2181

server.1=localhost:2887:3887

server.2=localhost:2888:3888

server.3=localhost:2889:3889

4 配置服务zk002 的配置文件

参考步骤3

# The number of milliseconds of each tick

tickTime=2000

# The number of ticks that the initial

# synchronization phase can take

initLimit=10

# The number of ticks that can pass between

# sending a request and getting an acknowledgement

syncLimit=5

# the directory where the snapshot is stored.

# do not use /tmp for storage, /tmp here is just

# example sakes.

dataDir=D:/Program Files/zookeeper/zookeeper-cluster/zk002/zookeeper-3.4.11/data

dataLogDir=D:/Program Files/zookeeper/zookeeper-cluster/zk002/zookeeper-3.4.11/logs

# the port at which the clients will connect

clientPort=2182

server.1=localhost:2887:3887

server.2=localhost:2888:3888

server.3=localhost:2889:3889

5 配置服务zk003 的配置文件

参考步骤3

tickTime=2000

# The number of ticks that the initial

# synchronization phase can take

initLimit=10

# The number of ticks that can pass between

# sending a request and getting an acknowledgement

syncLimit=5

# the directory where the snapshot is stored.

# do not use /tmp for storage, /tmp here is just

# example sakes.

dataDir=D:/Program Files/zookeeper/zookeeper-cluster/zk003/zookeeper-3.4.11/data

dataLogDir=D:/Program Files/zookeeper/zookeeper-cluster/zk003/zookeeper-3.4.11/logs

# the port at which the clients will connect

clientPort=2183

server.1=localhost:2887:3887

server.2=localhost:2888:3888

server.3=localhost:2889:3889

6 配置文件说明

“   server.id=host:port:port.   ”指示了不同的   ZooKeeper   服务器的自身标识，作为集群的一部分的机器应该知道   ensemble   中的其它机器。用户可以从“   server.id=host:port:port.   ”中读取相关的信息。   在服务器的 data（ dataDir 参数所指定的目录）目录下创建一个文件名为 myid 的文件，这个文件中仅含有一行的内容，指定的是自身的 id  值。比如，服务器“  1 ”应该在 myid 文件中写入“ 1  ”。这个   id   值必须是   ensemble   中唯一的，且大小在   1   到   255   之间。这一行配置中，第一个端口（   port   ）是从（   follower   ）机器连接到主（   leader   ）机器的端口，第二个端口是用来进行   leader   选举的端口。

6 部署myid文件

  D:\Program Files\zookeeper\zookeeper-cluster\zk001\zookeeper-3.4.11\data\myid    文件内容 1

  D:\Program Files\zookeeper\zookeeper-cluster\zk002\zookeeper-3.4.11\data\myid    文件内容 2

  D:\Program Files\zookeeper\zookeeper-cluster\zk003\zookeeper-3.4.11\data\myid    文件内容 3

 

7 分别启动3个服务

D:\Program Files\zookeeper\zookeeper-cluster\zk001\zookeeper-3.4.11\bin\zkServer.cmd

D:\Program Files\zookeeper\zookeeper-cluster\zk002\zookeeper-3.4.11\bin\zkServer.cmd

D:\Program Files\zookeeper\zookeeper-cluster\zk003\zookeeper-3.4.11\bin\zkServer.cmd

8 三个服务器没启动完成时，各个服务器会报错，都启动完成后，停止报错

 

 
 zk002当选为leader