作者:汪小九
链接:https://www.zhihu.com/question/27159393/answer/141047266
来源:知乎
著作权归作者所有。商业转载请联系作者获得授权,非商业转载请注明出处。
- 首先第一步前提是已经打开了SS代理;
- 如果要设置全局代理,可以依照这样设置
git config --global http.proxy http://127.0.0.1:1080
git config --global https.proxy https://127.0.0.1:1080
- 要注意自己的ss端口如果不是1080,要配置成自己的; 完成上面一步后,此时输入
git clone xxxxxxx
就可以利用代理进行下载了但同时,也请注意,这里指的是https协议,也就是
git clone https://www.github.com/xxxx/xxxx.git
,
而
git clone git@github.com:xxxxxx/xxxxxx.git
这种,依旧是无效的。 - 以上为总结,但我不推荐直接用全局代理因为如果挂了全局代理,这样如果需要克隆coding之类的国内仓库,会奇慢无比所以我建议使用这条命令,只对github进行代理,对国内的仓库不影响,
git config --global http.https://github.com.proxy https://127.0.0.1:1080
git config --global https.https://github.com.proxy https://127.0.0.1:1080
同时,如果在输入这条命令之前,已经输入全局代理的话,可以输入进行取消
git config --global --unset http.proxy
git config --global --unset https.proxy
- 如果是socks5需要按如下进行配置,同样端口需换成自己的,
git config --global http.https://github.com.proxy socks5://127.0.0.1:1086
git config --global https.https://github.com.proxy socks5://127.0.0.1:1086
说一下使用效果:
从5k/s进到20k/s, 也是很感人…