最近需要监控的设备和数据库越来越多,从网上找了一下,发现用nagios的很多,决定试试
操作系统:oracle enterprise linux R4 U7 i386
http采用系统自带的apache 2.0
从nagios官网下载安装软件
1、nagios-3.1.0.tar.gz
2、nagios-plugins-1.4.13.tar.gz
安装步骤来源于nagios随机文档
1、创建用户
groupadd nagios
groupadd nagcmd
useradd -g nagios -G nagcmd -d /usr/local/nagios nagios
usermod -a -G nagcmd apache
2、安装软件
解压缩 tar -zxvf nagios-3.1.0.tar.gz
cd nagios-3.1.0
./configure --with-command-group=nagcmd
make all
make install
make install-init
make install-config
make install-commandmode
make install-webconf
htpasswd -c /usr/local/nagios/etc/htpasswd.users nagiosadmin
service httpd restart
解压缩plugin tar -zxvf nagios-plugins-1.4.13.tar.gz
cd nagios-plugins-1.4.13
./configure --with-nagios-user=nagios --with-nagios-group=nagios --enable-redhat-pthread-workaround
make
make install
3、将nagios加入服务
chkconfig --add nagios
chkconifg nagios on
4、验证配置文件
/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg
5、启动nagios
service start nagios
6、如果selinux采用Enforcing mode
chcon -R -t httpd_sys_content_t /usr/local/nagios/sbin/
chcon -R -t httpd_sys_conten_t /usr/local/nagios/share/
否则CGI执行会有问题
7、访问
http://ip/nagios 输入密码就可以访问了
今天只是将nagios安装并能够访问了,下面还有很多工作要做,界面不错,功能也不错,值得研究
操作系统:oracle enterprise linux R4 U7 i386
http采用系统自带的apache 2.0
从nagios官网下载安装软件
1、nagios-3.1.0.tar.gz
2、nagios-plugins-1.4.13.tar.gz
安装步骤来源于nagios随机文档
1、创建用户
groupadd nagios
groupadd nagcmd
useradd -g nagios -G nagcmd -d /usr/local/nagios nagios
usermod -a -G nagcmd apache
2、安装软件
解压缩 tar -zxvf nagios-3.1.0.tar.gz
cd nagios-3.1.0
./configure --with-command-group=nagcmd
make all
make install
make install-init
make install-config
make install-commandmode
make install-webconf
htpasswd -c /usr/local/nagios/etc/htpasswd.users nagiosadmin
service httpd restart
解压缩plugin tar -zxvf nagios-plugins-1.4.13.tar.gz
cd nagios-plugins-1.4.13
./configure --with-nagios-user=nagios --with-nagios-group=nagios --enable-redhat-pthread-workaround
make
make install
3、将nagios加入服务
chkconfig --add nagios
chkconifg nagios on
4、验证配置文件
/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg
5、启动nagios
service start nagios
6、如果selinux采用Enforcing mode
chcon -R -t httpd_sys_content_t /usr/local/nagios/sbin/
chcon -R -t httpd_sys_conten_t /usr/local/nagios/share/
否则CGI执行会有问题
7、访问
http://ip/nagios 输入密码就可以访问了
今天只是将nagios安装并能够访问了,下面还有很多工作要做,界面不错,功能也不错,值得研究
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/3326/viewspace-591451/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/3326/viewspace-591451/