简介
本文介绍一个基于FFMPEG的封装格式转换器。所谓的封装格式转换,就是在AVI,FLV,MKV,MP4这些格式之间转换(对应.avi,.flv,.mkv,.mp4文件)。需要注意的是,本程序并不进行视音频的编码和解码工作。而是直接将视音频压缩码流从一种封装格式文件中获取出来然后打包成另外一种封装格式的文件。传统的转码程序工作原理如下图所示:
上图例举了一个举例:FLV(视频:H.264,音频:AAC)转码为AVI(视频:MPEG2,音频MP3)的例子。可见视频转码的过程通俗地讲相当于把视频和音频重新“录”了一遍。
本程序的工作原理如下图所示:
由图可见,本程序并不进行视频和音频的编解码工作,因此本程序和普通的转码软件相比,有以下两个特点:
处理速度极快。视音频编解码算法十分复杂,占据了转码的绝大部分时间。因为不需要进行视音频的编码和解码,所以节约了大量的时间。
视音频质量无损。因为不需要进行视音频的编码和解码,所以不会有视音频的压缩损伤。
流程(2014.9.29更新)
下面附上基于FFmpeg的Remuxer的流程图。图中使用浅红色标出了关键的数据结构,浅蓝色标出了输出视频数据的函数。可见成个程序包含了对两个文件的处理:读取输入文件(位于左边)和写入输出文件(位于右边)。中间使用了一个avcodec_copy_context()拷贝输入的AVCodecContext到输出的AVCodecContext。
简单介绍一下流程中关键函数的意义:
输入文件操作:
avformat_open_input():打开输入文件,初始化输入视频码流的AVFormatContext。
av_read_frame():从输入文件中读取一个AVPacket。
输出文件操作:
avformat_alloc_output_context2():初始化输出视频码流的AVFormatContext。
avformat_new_stream():创建输出码流的AVStream。
avcodec_copy_context():拷贝输入视频码流的AVCodecContex的数值t到输出视频的AVCodecContext。
avio_open():打开输出文件。
avformat_write_header():写文件头(对于某些没有文件头的封装格式,不需要此函数。比如说MPEG2TS)。
av_interleaved_write_frame():将AVPacket(存储视频压缩码流数据)写入文件。
av_write_trailer():写文件尾(对于某些没有文件头的封装格式,不需要此函数。比如说MPEG2TS)。
代码
贴上代码,代码是从FFmpeg的例子改编的,平台是VC2010。
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- #include "stdafx.h"
-
- extern "C"
- {
- #include "libavformat/avformat.h"
- };
-
-
- int _tmain(int argc, _TCHAR* argv[])
- {
- AVOutputFormat *ofmt = NULL;
-
-
- AVFormatContext *ifmt_ctx = NULL, *ofmt_ctx = NULL;
- AVPacket pkt;
- const char *in_filename, *out_filename;
- int ret, i;
- if (argc < 3) {
- printf("usage: %s input output\n"
- "Remux a media file with libavformat and libavcodec.\n"
- "The output format is guessed according to the file extension.\n"
- "Modified by Lei Xiaohua, leixiaohua1020@126.com\n"
- "Communication University of China / Digital TV Technology\n"
- "http://blog.csdn.net/leixiaohua1020", argv[0]);
- return 1;
- }
- in_filename = argv[1];
- out_filename = argv[2];
- av_register_all();
-
- if ((ret = avformat_open_input(&ifmt_ctx, in_filename, 0, 0)) < 0) {
- printf( "Could not open input file.");
- goto end;
- }
- if ((ret = avformat_find_stream_info(ifmt_ctx, 0)) < 0) {
- printf( "Failed to retrieve input stream information");
- goto end;
- }
- av_dump_format(ifmt_ctx, 0, in_filename, 0);
-
- avformat_alloc_output_context2(&ofmt_ctx, NULL, NULL, out_filename);
- if (!ofmt_ctx) {
- printf( "Could not create output context\n");
- ret = AVERROR_UNKNOWN;
- goto end;
- }
- ofmt = ofmt_ctx->oformat;
- for (i = 0; i < ifmt_ctx->nb_streams; i++) {
-
- AVStream *in_stream = ifmt_ctx->streams[i];
- AVStream *out_stream = avformat_new_stream(ofmt_ctx, in_stream->codec->codec);
- if (!out_stream) {
- printf( "Failed allocating output stream\n");
- ret = AVERROR_UNKNOWN;
- goto end;
- }
-
- ret = avcodec_copy_context(out_stream->codec, in_stream->codec);
- if (ret < 0) {
- printf( "Failed to copy context from input to output stream codec context\n");
- goto end;
- }
- out_stream->codec->codec_tag = 0;
- if (ofmt_ctx->oformat->flags & AVFMT_GLOBALHEADER)
- out_stream->codec->flags |= CODEC_FLAG_GLOBAL_HEADER;
- }
-
- av_dump_format(ofmt_ctx, 0, out_filename, 1);
-
- if (!(ofmt->flags & AVFMT_NOFILE)) {
- ret = avio_open(&ofmt_ctx->pb, out_filename, AVIO_FLAG_WRITE);
- if (ret < 0) {
- printf( "Could not open output file '%s'", out_filename);
- goto end;
- }
- }
-
- ret = avformat_write_header(ofmt_ctx, NULL);
- if (ret < 0) {
- printf( "Error occurred when opening output file\n");
- goto end;
- }
- int frame_index=0;
- while (1) {
- AVStream *in_stream, *out_stream;
-
- ret = av_read_frame(ifmt_ctx, &pkt);
- if (ret < 0)
- break;
- in_stream = ifmt_ctx->streams[pkt.stream_index];
- out_stream = ofmt_ctx->streams[pkt.stream_index];
-
-
- pkt.pts = av_rescale_q_rnd(pkt.pts, in_stream->time_base, out_stream->time_base, (AVRounding)(AV_ROUND_NEAR_INF|AV_ROUND_PASS_MINMAX));
- pkt.dts = av_rescale_q_rnd(pkt.dts, in_stream->time_base, out_stream->time_base, (AVRounding)(AV_ROUND_NEAR_INF|AV_ROUND_PASS_MINMAX));
- pkt.duration = av_rescale_q(pkt.duration, in_stream->time_base, out_stream->time_base);
- pkt.pos = -1;
-
- ret = av_interleaved_write_frame(ofmt_ctx, &pkt);
- if (ret < 0) {
- printf( "Error muxing packet\n");
- break;
- }
- printf("Write %8d frames to output file\n",frame_index);
- av_free_packet(&pkt);
- frame_index++;
- }
-
- av_write_trailer(ofmt_ctx);
- end:
- avformat_close_input(&ifmt_ctx);
-
- if (ofmt_ctx && !(ofmt->flags & AVFMT_NOFILE))
- avio_close(ofmt_ctx->pb);
- avformat_free_context(ofmt_ctx);
- if (ret < 0 && ret != AVERROR_EOF) {
- printf( "Error occurred.\n");
- return -1;
- }
- return 0;
- }
调试的时候,只需要“右键工程->调试->命令行参数”里面设置输入的文件名和输出的文件名就可以了。
结果
下图显示了一个测试的输入文件的视音频参数。
下图显示了输出文件的视音频参数。可以看出除了视频的封装格式从flv转换成了mp4,其他有关视音频编码的参数没有任何变化。
下载