Tilting R-Raymond Mill


R-tilting Raymond mill is China's building materials, mining, metallurgy, chemical industry grinding various Mohs hardness below seven, humidity below 6%, the product fineness in the range of 0.044 ~ 0.125mm The main ore grinding equipment, standard of R-tilting Raymond mill has 2R2613,3R2714,4R3216,5R4119 type Pendulum Grinder?. R-tilting mill feed size (material size) is the main control parameters of the mill, determine whether the material in the mill for grinding crushed. There is no R-tilting domestic mill feed size is calculated, the feed size is mainly a reference to similar foreign models to determine the appropriate size. In this paper, conditions tilting R-mill study formulas derived feed size, reasonably determine the maximum R-tilting mill feed size, in order to ensure the effective R-tilting mill grinding of materials .
R-tilting mill for grinding material is done by the host mill. Structure and working principle mill host (see Figure 1), the mill is mainly composed of the central axis of the host, plum frame, roller device, roller, grinding ring, blade unit, blade, chassis and other component parts. Gearing the motion to the central axis rotary-driven plum, plum hosts hung on racks with multiple roller device rotating around the central axis of the plum frame, roller mill roller rotates around the same time, under the action of centrifugal force roller device swing outward, roller compacted grinding ring. After grinding the material required to enter the host, with the central axis of rotation of the blade to throw roller, grinding ring and asked, abrasive materials and grinding by the revolution and rotation of the grinding surface of the grinding ring-roll, squeeze.
The material in the R-tilting mill grinding roller, grinding ring is rolled between the first condition is that the material is extruded abrasive grinding roller sent between grinding ring is engaged without bounce out. Altercation for meshing angle, pressure angle corresponding material size of radius R thereof. When R-tilting Mill actual feed size less than or equal to 2R matter, between roller, grinding ring is engaged and is rolling, extrusion crushing, grinding and vice versa can not be crushed. Setting spherical materials when material engagement between the roller, grinding ring and grinding ring, roller respectively tangent to 4, B point, the role of the material by the four forces. (

来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/29781514/viewspace-1591092/,如需转载,请注明出处,否则将追究法律责任。

转载于:http://blog.itpub.net/29781514/viewspace-1591092/

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值