The use and maintenance of the grinding mill
1. It should check if there are transportation damages and each random data is complete. Before starting up the grinding mill, it had better confirm if there are iron pieces in the grinding cavity in case of the incident of blocking up. In addition, it should make sure the rotating direction is correct. After having noticed these points, you can start the motor and put the machine into use.
2. The duration time of the spare parts is decided by different materials. If there is any wear, it should change or replace them in time. For instance,when installing the blade, the rotary knife must be tightly fixed, while the fixed knife need be only slight fixed. Then it should tighten the screw of the fixed knife and lock the adjustable screw. After this, the whole replacing process is finished.
After the grinding mill worked for about 500 hours, it should check the main gearings and other main spare parts and replace the damaged parts if necessary.
Maintenance is an important part of the usage of a grinding mill because only a machine in good condition can operate normally and efficiently. Daswell is a professional manufacturer of kinds of grinding mills such as high efficiency ball mill and advanced Raymond mill. We not only supply high quality products, but also complete and best service.
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/28548785/viewspace-762638/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/28548785/viewspace-762638/