自动挂载裸设备及权限

自动挂载裸设备 方法一： OEL5 vi /etc/sysconfig/rawdevices /dev/raw/raw1 /dev/sdb1 /dev/raw/raw2 /dev/sdb2 /dev/raw/raw3 /dev/sdb3 /etc/init.d/rawdevices status/restart/...

方法二： OEL5/redhat5下

vi /etc/udev/rules.d/60-raw.rules ACTION=="add", KERNEL=="sdd1", RUN+="/bin/raw /dev/raw/raw1 %N" ACTION=="add", KERNEL=="sde1", RUN+="/bin/raw /dev/raw/raw2 %N" ACTION=="add", KERNEL=="sdf1", RUN+="/bin/raw /dev/raw/raw3 %N"

启动后权限 vi /etc/udev/rules.d/65-raw-permissions.rules # Set permissions of raw bindings to Oracle Clusterware devices KERNEL=="raw1", WNER="oracle", GROUP="oinstall", MODE="660" KERNEL=="raw2", WNER="oracle", GROUP="oinstall", MODE="660" KERNEL=="raw3", WNER="oracle", GROUP="oinstall", MODE="660"


资料： Redhat 5 以上版本已经取消了对裸设备的支持，所以在安装 Oracle RAC 时所使用的的裸设备，需要通过 Udev 进行设置:
设置重新启动自动挂载裸设备 vi /etc/udev/rules.d/60-raw.rules ACTION=="add", KERNEL=="sdd1", RUN+="/bin/raw /dev/raw/raw1 %N" ACTION=="add", KERNEL=="sde1", RUN+="/bin/raw /dev/raw/raw2 %N" ACTION=="add", KERNEL=="sdf1", RUN+="/bin/raw /dev/raw/raw3 %N"
注意确定raw命令在/bin目录下,有的linux是在/usr/bin目录下
vi /etc/udev/rules.d/65-raw-permissions.rules # Set permissions of raw bindings to Oracle Clusterware devices KERNEL=="raw1", WNER="root", GROUP="oinstall", MODE="660" KERNEL=="raw2", WNER="oracle", GROUP="oinstall", MODE="660" KERNEL=="raw3", WNER="oracle", GROUP="oinstall", MODE="660"
以上方法也适用其他使用udev挂载设备的linux版本.
具体请参考 Oracle 官方文档:
Note 465001.1 - Configuring raw devices (singlepath) for Oracle Clusterware10gRelease 2 (10.2.0) on RHEL5/ OEL5





missing folder /etc/udev/permissions.d  Posted: 2008-1-13 下午5:23    in response to: user611755 Reply Hi,
What kind of OS are you running ? Please upload the output of "uname -a". If you are using EL5/RHEL5, that's right. You can't find the folder /etc/udev/permissions.d. Please follow the following steps:
1. Add udev permission rules to /etc/udev/rules.d/65-raw-permissions.rules file 2. Add the udev permission rules to the /etc/udev/rules.d/65-raw-permissions.rules file, for example: # Set permissions of raw bindings to Oracle Clusterware devices KERNEL=="raw1", WNER="root", GROUP="oinstall", MODE="640" KERNEL=="raw2", WNER="oracle", GROUP="oinstall", MODE="640"

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/193748/viewspace-692385/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/193748/viewspace-692385/