1.下载安装Windows版本的Nginx,官网:http://nginx.org/en/download.html下载稳定版本的1.8.0(偶数为稳定版本,奇数为开发版本)
下载到zip包,解压就可以了,如我解压到d:/server,文档结构如下图
主要的配置文件在conf目录下,稍后介绍
解压完成后,就可以启动Nginx了,通过cmd进入命令行cd到目录:D:\server\nginx-1.8.0下,输入nginx就可以启动了。如下图
nginx -s stop可以停止Nginx服务器。nginx -t 检查配置
2.nginx.conf 配置(以下代码是Nginx服务器conf目录下的 nginx.conf 配置文件)
#Nginx所用用户和组,window下不指定
#user nobody;
#工作的子进程数量(通常等于CPU数量)
worker_processes 4;
#错误日志存放路径
#error_log logs/error.log;
#error_log logs/error.log notice;
#error_log logs/error.log info;
#指定pid存放文件
#pid logs/nginx.pid;
events {
#使用网络IO模型linux建议epoll,FreeBSD建议采用kqueue,window下不指定。
#use epoll;
#允许最大连接数
worker_connections 1024;
}
http {
include mime.types;
default_type application/octet-stream;
#定义日志格式
#log_format main '$remote_addr - $remote_user [$time_local] "$request" '
# '$status $body_bytes_sent "$http_referer" '
# '"$http_user_agent" "$http_x_forwarded_for"';
#access_log logs/access.log main;
sendfile on;
#tcp_nopush on;
#keepalive_timeout 0;
keepalive_timeout 65;
#gzip on;
#引入Gzip.conf配置文件,此文件需要与 nginx.conf 放置在同一个目录下
include Gzip.conf;
#引入Proxy.conf配置文件,此文件需要与 nginx.conf 放置在同一个目录下
include Proxy.conf;
upstream localhost {
#根据ip计算将请求分配各那个后端tomcat,许多人误认为可以解决session问题,其实并不能。
#同一机器在多网情况下,路由切换,ip可能不同
#ip_hash;
#不同tomcat对应的端口,必须保证每个tomcat端口的不同,避免引起端口冲突
server localhost:18081;
server localhost:18080;
}
server {
listen 80;
server_name localhost;
#charset koi8-r;
#access_log logs/host.access.log main;
location / {
#root html;
#index index.html index.htm;
proxy_connect_timeout 3;
proxy_send_timeout 30;
proxy_read_timeout 30;
proxy_pass http://localhost;
}
#error_page 404 /404.html;
# redirect server error pages to the static page /50x.html
#
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root html;
}
# proxy the PHP scripts to Apache listening on 127.0.0.1:80
#
#location ~ \.php$ {
# proxy_pass http://127.0.0.1;
#}
# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
#
#location ~ \.php$ {
# root html;
# fastcgi_pass 127.0.0.1:9000;
# fastcgi_index index.php;
# fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;
# include fastcgi_params;
#}
# deny access to .htaccess files, if Apache's document root
# concurs with nginx's one
#
#location ~ /\.ht {
# deny all;
#}
}
3.Gzip.conf 配置
gzip on;
gzip_min_length 1000;
gzip_types text/plain text/css application/x-javascript;
4.Proxy.conf 配置
proxy_redirect off;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
client_max_body_size 10m;
client_body_buffer_size 128k;
proxy_connect_timeout 300;
proxy_send_timeout 300;
proxy_read_timeout 300;
proxy_buffer_size 4k;
proxy_buffers 4 32k;
proxy_busy_buffers_size 64k;
proxy_temp_file_write_size 64k;
5.tomcat 配置
tomcat 的配置都是在server.xml 文件中,修改几处端口,避免端口的冲突就可以了。
本例中集群两台tomcat服务器,第一台tomcat的配置如下,第二台tomcat的配置对应的端口分别为:18006,18081,8010
修改第一处端口:
<!-- 修改port端口:18005 俩个tomcat不能重复,端口随意,别太小-->
<Server port="18005" shutdown="SHUTDOWN">
修改第二处端口:
<Connector port="18080" protocol="HTTP/1.1"
connectionTimeout="20000"
redirectPort="8443" />
修改第三处端口:
<Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />
6.验证Nginx配置:nginx -t,如下图则表示配置成功:
启动两个tomcat,端口对应分别为18080,18081,然后通过http://localhost访问Nginx,nginx会自动将请求分发到tomcat中。
可以通过修改tomcat默认的index.jsp页面来标示访问的是哪一个tomcat
tomcat-1
tomcat-2