Purpose
当production order close后,可以delete(设置deletion flag)或者真正archive它. 所以一般status: DLV->TECO->CLSD->DLFL->DLT.
其中由DLFL到DLT由order type-specific中定义的residence time来定义。
Content
- 此时是可以设置 deletion flag的,即使没有teco, DLfL
- 但是可以Undo
Delete flag
CO78
重新Main variant
- 同时测试,若没有DFLF (order无DFLF)
或置上DFLF
- 并无DFL
==>所以TECO,CSLD,DFLF,并没有前后顺序;但是DFLF与DFL有。
再run
Order
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/17144169/viewspace-2136478/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/17144169/viewspace-2136478/