csgd2000的博客

原创 H3C交换机配置链路聚合

system-view //进入配置模式动态链路聚合：[SW]dis cu //查看所有配置端口信息[SW]int Bridge-Aggregation 1 //创建链路聚合组端口1[SW-Bridge-Aggregation1]link-aggregation mode dynamic //链路聚合模式动态（分为动态，静态，手工负载）[SW-Bridge-Aggregation1]interface gigabitethernet 1/0/1 //进入网口[SW-Ethern.