CTP tt0-201 Exam

Exam Number/Code : tt0-201 Exam Name : Convergence Technologies Professional 2007 Questions and Answers : 260 Q&As Update Time: 2010-05-02

 

1. Which of the following codecs specifies a voice stream operating at 8 Kbps, is less complex than G.729, and yet
obtains roughly the same Mean Opinion Score (MOS)?
A. G.711
B. G.723
C. G.726
D. G.729a
Answer: D

2. Which of the following can cause the most significant interference with WiFi communications?
A. Ethernet hubs
B. Television equipment
C. 2.4-GHz cordless phones
D. 900-MHz cordless phones
Answer: C

3. What is the call sequence as established by the Q.931 standard?
A. ALERTING, CALL PROCEEDING, CONNECT, ACKNOWLEDGE, FIN
B. ALERTING, CALL PROCEEDING, CONNECT, CONNECT ACK, RELEASE
C. SETUP, CALL PROCEEDING, ALERTING, CONNECT, CONNECT ACK, DISCONNECT, RELEASE, RELEASE
COMPLETE
D. ESTABLISH, SYN, SYN ACK, CONNECT, CONNECT ACK, CALL PROCEEDING, DISCONNECT, RELEASE,
RELEASE ACKNOWLEDGE, FIN
Answer: C

4. Which of the following is responsible for ensuring that incoming customer calls are properly queued according to
the order in which they were received?
A. SIP proxy
B. Edge router
C. Automatic Call Distributor (ACD)
D. Analog Telephone Adapter (ATA)
Answer: C

5. You want to connect a PBX made by one manufacturer to another PBX made by a different manufacturer. You need
to ensure that these interconnected PBXs will retain their basic and supplementary services. Which protocol was
originally designed to allow this?
A. H.225
A. H.225
B. H.450
C. Q.932
D. QSIG
Answer: D

6. Which of the following describes the proper sequence of the TCP handshake?
A. The client sends an RST packet, the server issues an ACK packet, and the client replies with an ACK packet,
completing the handshake.
B. The client sends a REQ packet, the server sends a SYN packet, and then the client replies with a FIN packet,
completing the handshake.
C. The client sends an RST packet, the server sends a SYN packet, and then the client replies with a SYN ACK
packet, completing the handshake.
D. The client sends a SYN packet, the server sends a SYN ACK packet, and then the client replies with an ACK
packet, completing the handshake.
Answer: D

7. Your team has determined that the voice quality of a video transmission is too low. What Mean Opinion Score
(MOS) would indicate a low level of voice quality?
A. 2.5
B. 3.6
C. 45
D. 77
Answer: A

8. Which of the following is most likely to cause packet loss and clicking during a phone call?
A. Impedance mismatch
B. Improper reference clocking
C. Improper equipment grounding
D. Packets arriving out of order
Answer: B

9. Which element of a convergent network does a connection-hijacking attack typically exploit?
A. Soft phones
B. Wireless network radio frequencies
C. The TCP three-way handshake
D. Network Address Translation (NAT)
Answer: C

10. Which of the following best describes ISDN Primary Rate Interface (PRI) in both North America and Europe?
A. In all areas, ISDN PRI offers two 64-Kbps "B" channels and one 16-Kbps "D" channel.
B. In Europe, Asia and Africa, ISDN PRI offers two 64-Kbps "B" channels and one 16-Kbps "D" channel; whereas in
North America, it offers only two 64-Kbps "B" channels.
C. In Europe, Asia and Africa, ISDN PRI offers 30 64-Kbps "B" channels, plus two 64-Kbps "D" channels for framing
and signaling, respectively; whereas in North America, it offers 23 64-Kbps "B" channels and one 64-Kbps "D"
signaling channel.
D. In North America, ISDN PRI offers 30 64-Kbps "B" channels, plus two 64-Kbps "D" signaling channels for framing
and signaling, respectively; whereas in Europe, Asia and Africa, it offers 23 64-Kbps "B" channels, plus one 64-Kbps
"D" channel for framing and signaling.
Answer: C

11. In which of the following layers of the OSI/RM would you find Session Initiation Protocol (SIP)?
A. Network layer
B. Physical layer
C. Session layer
D. Application layer
Answer: D

12. Which of the following best describes differences between DiffServ and 802.1p?
A. DiffServ uses Layer 3 devices for QoS, whereas 802.1p uses Layer 2 devices for QoS.
B. DiffServ requires an Application Layer Gateway (ALG), whereas 802.1p requires a Layer 3 switch.
C. DiffServ uses Layer 2 devices for QoS, whereas 802.1p uses Layer 3 devices for QoS.
D. Microsoft's Packet Scheduler uses DiffServ at Layer 7 of the OSI, whereas Cisco products use 802.1p at Layer 4 of
the OSI.
Answer: A

13. When data is sent down to the session layer of the OSI/RM, the PDU consists of which encapsulated
components?
A. Physical header, network header, data
B. Data, application header, presentation header
C. Network header, data link header, physical header
D. Application header, presentation header, transport header
Answer: B

14. Receiving a fax as an e-mail attachment is an example of which technology?
A. Circuit-switched faxing, as defined by T.30
B. Multipoint application sharing, as defined by T.128
C. Store-and-forward faxing, as defined by T.37
D. Multipoint still image exchange, as defined by T.127
Answer: C

15. Which of the following will best help you determine the presence of bottlenecks in a switched LAN?
A. Disabling frame. tagging
B. Enabling VLAN hopping
C. Establishing a baseline
D. Creating an Acceptable Use Policy (AUP)
Answer: C

16. What is the term for assigning a unique VLAN identifier to traffic controlled according to 802.1q standards?
A. Frame. tagging
B. VLAN switching
C. Packet injection
D. LAN segmentation
Answer: A

17. Which device specializes in admitting calls into a network, manages session traffic, and helps traffic traverse a
firewall?
A. Layer 3 switch
B. Multipoint Control Unit (MCU)
C. IP Multimedia Subsystem (IMS)
D. Session Border Controller (SBC)
Answer: D

18. Which of the following are common elements of a Call Detail Record (CDR)?
A. Conversation time, QoS results, and caller
B. Caller, duration, and amount billed for each call
C. Amount billed for each call, IP address of calling host, and QoS results
D. IP address of calling host, duration, and Mean Opinion Score (MOS)
Answer: B

19. Consider the following output of the tracert command:
Tracing route to www.CTP-certified.com [164.128.206.2] over a maximum of 30 hops:
1 2 ms 1 ms 2 ms 192.168.1.1
2 13 ms 9 ms 12 ms 10.160.64.1
3 10 ms 11 ms 11 ms 68.2.9.21
4 9 ms 10 ms 8 ms 68.2.13.166
5 9 ms 12 ms 13 ms 68.2.13.30
6 27 ms 16 ms 9 ms chnddsrj02-ae2.0.rd.ph.cox.net [68.2.14.5]
7 32 ms 24 ms 20 ms langhbr01-ae0.r2.1a.cox.net [68.1.0.232]
8 21 ms 25 ms 25 ms eqix.lsan.twtelecom.net [206.223.123.36]
9 18 ms 18 ms 24 ms 66.192.251.26
10 40 ms 33 ms 35 ms core-01-so-0-0-0-0.phnx.twtelecom.net [66.192.7.17]
11 36 ms 42 ms 39 ms hagg-01-ge-0-3-0-510.phnx.twtelecom.net [66.192.247.73]
12 40 ms 43 ms 45 ms 206-169-207-8.static.twtelecom.net [206.169.207.8]
13 44 ms 51 ms 42 ms www.ctpcertified.org [64.128.206.2]
Trace complete.
Line 4 includes the string "9 ms 10 ms 8 ms." What do these numbers indicate?
A. The average time it took for the router to respond
B. The router's three interfaces that are able to respond to the tracert query
C. The response time for the three packets sent by tracert to return from the router
D. The time it takes for intervening hosts to process the packets between your host and the router in question
Answer: C

20. When calculating bandwidth consumption, which of the following factors should you consider?
A. Reference clocking settings, ESP mode, and BOOTP settings
B. Codec, Ethernet overhead, and silence suppression (if supported)
C. Codec, BOOTP settings, and Maximum Transmission Unit (MTU) settings
D. Maximum Transmission Unit (MTU) settings and NAPTR records
Answer: B

tt0-201 Braindumps
tt0-201 Convergence Technologies Professional 2007

我正在玩搜狐微博，快来“关注”我，了解我的最新动态吧。 "+userLink+""; $('miniAd').show(); } }, onFailure: function(){} }}); } showMiniAd();

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/23867001/viewspace-665958/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/23867001/viewspace-665958/