Stone crusher to promote the mining of rare earth resources

Stone crusher to promote the mining of rare earth resources

     Retrospect and Prospect of the past 10 years, Taiwan's mold industry development since 2002, China's mold industry for many years to achieve growth of more than 20%.The data show that the 10th Five-Year Plan "period, China's mold industry economic indicators rose sharply, the mold industrial output value of average annual growth rate of 23.71%, the mold industrial output value in 2005 to 2.9 times in 2000, a profit of 4.05 times in 2000.2006, 2007, various economic indicators performance is gratifying, an increase of more than 30% over the previous year, cone crusher so that the mold industrial output value in 2007 than in 2000,[brick making machine:http://www.xbm-aac.com] an increase of 5.06 times the profit is increased by 7.5 times. In recent years, the rapid development of China's mold industry.In 2011, the mold industry growth rate continued to climb, the the national mold total output growth still reached 44%, ranking first in the industrial sectors.

 

   Previously, the mold industry has had rapid growth in a short two or three years, but then often accompanied by a saddle-shaped, big play, there will be a roller-coaster.Into the round of high-speed growth in the new century, relatively speaking, is a sustained, coordinated, balanced development, mold industrial upgrade, brick making machine jumped accumulated enormous energy from quantitative to qualitative change.International Mould & Metal & Plastic Industry Suppliers Association alicey599  official Luo Baihui mold growth of industrial efficiency, fast growth in production and sales, while in previous many cases, the production and sales growth is not accompanied by effective synchronization.This growth in the new century, accompanied by a variety updates, improve efficiency, stone crushers labor productivity and new products, a high level at the same time appear. By the impact of the economic recovery and the automotive, IT industry development drive, mold production value of Taiwan in 2011 rose to 428 billion, expected "second five" Taiwan, China mold industry will have the opportunity to continue toward recovery. Development of Taiwan's mold industry for nearly 10 years, the mold industry production and sales in the boom environment to improve the low base, according to the Ministry of Economic Affairs ITIS statistics mold industry output value of the fourth quarter of 2009 compared to the same period in 2008 decreased by 3.7%, but the continuation of the recovery trend of the previous two quarters, compared with the third quarter grew 16% to NT $ 11.58 billion yuan, annual production value of about NT $ 38.76 billion yuan year-on-year decline of 19.6%.With the global economic recovery, with the mainland continued to launch stimulus mold production value of Taiwan in 2011 rebounded to 42.8 billion yuan. In international trade,

 

    Taiwan in 2011 mold export value of 135 million Taiwan dollars, the import value of 25.8 billion New Taiwan dollars, the trade surplus of NT $ 10.92 billion yuan, the value of exports and imports value compared with the same period last year, both the growth situation .Trade targets, due to the gradual improvement of the U.S. economic environment, Taiwan's exports to the United States die substantial growth compared to the same period last times. In recent years, Taiwan's imports from the mainland, plastic mold increase year after year, relative to 2005, imports from the mainland, the plastic mold approximately 10.4 billion New Taiwan dollars, only about 1/3 of the total value of imports of plastic mold and plastic mold of imports from the mainland in 2009 has reached 17.7 billion yuan, accounted for almost 3/4 of the import value of the plastic mold, International Mould & Metal & Plastic Industry Suppliers Association official Luo Baihui analysis, this was mainly due to the impact from the layout of the steam locomotive components manufacturers, industry business model is the orders in Taiwan, making the mold rough through subsidiaries in Mainland China, and then shipped back to Taiwan for further finishing and subsequent heat treatment and surface treatment processes re-exports, which makes cross-strait division of labor trend is very clear.Due Formosa Plastics Mold average import tax rate of only 1.3%, and exports plastic mold of the industry in the mainland to Taiwan will continue to enjoy the export tax rebate of 14% of our making such a division of labor has become increasingly evident, with the two sides signed the ECFA can expect the situation will be exacerbated.

  rock crusher:http://www.xb-machine.com
brick making machine:http://www.xbm-aac.com

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/28245485/viewspace-745857/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/28245485/viewspace-745857/